1 | smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.7.5-200.fc24.x86_64] (local build)
|
---|
2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Model Family: Samsung based SSDs
|
---|
6 | Device Model: SAMSUNG MZ7LN512HCHP-000L1
|
---|
7 | Serial Number: S1ZKNXAGC02444
|
---|
8 | LU WWN Device Id: 5 002538 d00000000
|
---|
9 | Firmware Version: EMT04L0Q
|
---|
10 | User Capacity: 512,110,190,592 bytes [512 GB]
|
---|
11 | Sector Size: 512 bytes logical/physical
|
---|
12 | Rotation Rate: Solid State Device
|
---|
13 | Device is: In smartctl database [for details use: -P show]
|
---|
14 | ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
|
---|
15 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
---|
16 | Local Time is: Thu Nov 17 10:01:33 2016 CET
|
---|
17 | SMART support is: Available - device has SMART capability.
|
---|
18 | SMART support is: Enabled
|
---|
19 | AAM feature is: Unavailable
|
---|
20 | APM feature is: Unavailable
|
---|
21 | Rd look-ahead is: Enabled
|
---|
22 | Write cache is: Enabled
|
---|
23 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
---|
24 | Wt Cache Reorder: Enabled
|
---|
25 |
|
---|
26 | === START OF READ SMART DATA SECTION ===
|
---|
27 | SMART overall-health self-assessment test result: PASSED
|
---|
28 |
|
---|
29 | General SMART Values:
|
---|
30 | Offline data collection status: (0x00) Offline data collection activity
|
---|
31 | was never started.
|
---|
32 | Auto Offline Data Collection: Disabled.
|
---|
33 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
34 | without error or no self-test has ever
|
---|
35 | been run.
|
---|
36 | Total time to complete Offline
|
---|
37 | data collection: ( 0) seconds.
|
---|
38 | Offline data collection
|
---|
39 | capabilities: (0x53) SMART execute Offline immediate.
|
---|
40 | Auto Offline data collection on/off support.
|
---|
41 | Suspend Offline collection upon new
|
---|
42 | command.
|
---|
43 | No Offline surface scan supported.
|
---|
44 | Self-test supported.
|
---|
45 | No Conveyance Self-test supported.
|
---|
46 | Selective Self-test supported.
|
---|
47 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
48 | power-saving mode.
|
---|
49 | Supports SMART auto save timer.
|
---|
50 | Error logging capability: (0x01) Error logging supported.
|
---|
51 | General Purpose Logging supported.
|
---|
52 | Short self-test routine
|
---|
53 | recommended polling time: ( 2) minutes.
|
---|
54 | Extended self-test routine
|
---|
55 | recommended polling time: ( 265) minutes.
|
---|
56 | SCT capabilities: (0x003d) SCT Status supported.
|
---|
57 | SCT Error Recovery Control supported.
|
---|
58 | SCT Feature Control supported.
|
---|
59 | SCT Data Table supported.
|
---|
60 |
|
---|
61 | SMART Attributes Data Structure revision number: 1
|
---|
62 | Vendor Specific SMART Attributes with Thresholds:
|
---|
63 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
---|
64 | 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
---|
65 | 9 Power_On_Hours -O--CK 098 098 000 - 6433
|
---|
66 | 12 Power_Cycle_Count -O--CK 099 099 000 - 68
|
---|
67 | 170 Unknown_Attribute -O--CK 100 100 010 - 0
|
---|
68 | 171 Unknown_Attribute -O--CK 100 100 010 - 0
|
---|
69 | 172 Unknown_Attribute -O--CK 100 100 010 - 0
|
---|
70 | 173 Unknown_Attribute PO--CK 098 098 005 - 31
|
---|
71 | 174 Unknown_Attribute -O--CK 099 099 000 - 30
|
---|
72 | 178 Used_Rsvd_Blk_Cnt_Chip PO--C- 100 100 010 - 0
|
---|
73 | 180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 1578
|
---|
74 | 184 End-to-End_Error PO--CK 100 100 097 - 0
|
---|
75 | 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0
|
---|
76 | 194 Temperature_Celsius -O--CK 064 050 000 - 36
|
---|
77 | 199 CRC_Error_Count -OSRCK 100 100 000 - 0
|
---|
78 | 233 Media_Wearout_Indicator PO--C- 098 098 000 - 16517168
|
---|
79 | 241 Total_LBAs_Written -O--CK 099 099 000 - 10346
|
---|
80 | 242 Total_LBAs_Read -O--CK 099 099 000 - 13482
|
---|
81 | 249 Unknown_Attribute -O--CK 099 099 000 - 15872
|
---|
82 | ||||||_ K auto-keep
|
---|
83 | |||||__ C event count
|
---|
84 | ||||___ R error rate
|
---|
85 | |||____ S speed/performance
|
---|
86 | ||_____ O updated online
|
---|
87 | |______ P prefailure warning
|
---|
88 |
|
---|
89 | General Purpose Log Directory Version 1
|
---|
90 | SMART Log Directory Version 1 [multi-sector log support]
|
---|
91 | Address Access R/W Size Description
|
---|
92 | 0x00 GPL,SL R/O 1 Log Directory
|
---|
93 | 0x01 SL R/O 1 Summary SMART error log
|
---|
94 | 0x02 SL R/O 1 Comprehensive SMART error log
|
---|
95 | 0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
---|
96 | 0x06 SL R/O 1 SMART self-test log
|
---|
97 | 0x07 GPL R/O 1 Extended self-test log
|
---|
98 | 0x09 SL R/W 1 Selective self-test log
|
---|
99 | 0x10 GPL R/O 1 SATA NCQ Queued Error log
|
---|
100 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
---|
101 | 0x13 GPL R/O 1 SATA NCQ Send and Receive log
|
---|
102 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
---|
103 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
---|
104 | 0xdf GPL,SL VS 1 Device vendor specific log
|
---|
105 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
---|
106 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
---|
107 |
|
---|
108 | SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
---|
109 | No Errors Logged
|
---|
110 |
|
---|
111 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
---|
112 | No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
---|
113 |
|
---|
114 | Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
---|
115 | SMART Selective self-test log data structure revision number 1
|
---|
116 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
117 | 1 0 0 Not_testing
|
---|
118 | 2 0 0 Not_testing
|
---|
119 | 3 0 0 Not_testing
|
---|
120 | 4 0 0 Not_testing
|
---|
121 | 5 0 0 Not_testing
|
---|
122 | 255 0 65535 Read_scanning was never started
|
---|
123 | Selective self-test flags (0x0):
|
---|
124 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
125 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
126 |
|
---|
127 | SCT Status Version: 3
|
---|
128 | SCT Version (vendor specific): 256 (0x0100)
|
---|
129 | SCT Support Level: 1
|
---|
130 | Device State: SCT command executing in background (5)
|
---|
131 | Current Temperature: 36 Celsius
|
---|
132 | Power Cycle Min/Max Temperature: 35/40 Celsius
|
---|
133 | Lifetime Min/Max Temperature: 0/70 Celsius
|
---|
134 | Under/Over Temperature Limit Count: 4294967295/4294901760
|
---|
135 | SMART Status: 0xffff (Reserved)
|
---|
136 |
|
---|
137 | SCT Temperature History Version: 3 (Unknown, should be 2)
|
---|
138 | Temperature Sampling Period: 1 minute
|
---|
139 | Temperature Logging Interval: 10 minutes
|
---|
140 | Min/Max recommended Temperature: 0/70 Celsius
|
---|
141 | Min/Max Temperature Limit: 0/70 Celsius
|
---|
142 | Temperature History Size (Index): 128 (74)
|
---|
143 |
|
---|
144 | Index Estimated Time Temperature Celsius
|
---|
145 | 75 2016-11-16 12:50 36 *****************
|
---|
146 | ... ..( 26 skipped). .. *****************
|
---|
147 | 102 2016-11-16 17:20 36 *****************
|
---|
148 | 103 2016-11-16 17:30 37 ******************
|
---|
149 | 104 2016-11-16 17:40 36 *****************
|
---|
150 | 105 2016-11-16 17:50 36 *****************
|
---|
151 | 106 2016-11-16 18:00 37 ******************
|
---|
152 | 107 2016-11-16 18:10 37 ******************
|
---|
153 | 108 2016-11-16 18:20 37 ******************
|
---|
154 | 109 2016-11-16 18:30 36 *****************
|
---|
155 | 110 2016-11-16 18:40 37 ******************
|
---|
156 | ... ..( 3 skipped). .. ******************
|
---|
157 | 114 2016-11-16 19:20 37 ******************
|
---|
158 | 115 2016-11-16 19:30 36 *****************
|
---|
159 | ... ..( 24 skipped). .. *****************
|
---|
160 | 12 2016-11-16 23:40 36 *****************
|
---|
161 | 13 2016-11-16 23:50 35 ****************
|
---|
162 | 14 2016-11-17 00:00 36 *****************
|
---|
163 | ... ..( 2 skipped). .. *****************
|
---|
164 | 17 2016-11-17 00:30 36 *****************
|
---|
165 | 18 2016-11-17 00:40 35 ****************
|
---|
166 | 19 2016-11-17 00:50 36 *****************
|
---|
167 | ... ..( 33 skipped). .. *****************
|
---|
168 | 53 2016-11-17 06:30 36 *****************
|
---|
169 | 54 2016-11-17 06:40 35 ****************
|
---|
170 | 55 2016-11-17 06:50 35 ****************
|
---|
171 | 56 2016-11-17 07:00 36 *****************
|
---|
172 | ... ..( 17 skipped). .. *****************
|
---|
173 | 74 2016-11-17 10:00 36 *****************
|
---|
174 |
|
---|
175 | SCT Error Recovery Control:
|
---|
176 | Read: Disabled
|
---|
177 | Write: Disabled
|
---|
178 |
|
---|
179 | Device Statistics (GP/SMART Log 0x04) not supported
|
---|
180 |
|
---|
181 | SATA Phy Event Counters (GP Log 0x11)
|
---|
182 | ID Size Value Description
|
---|
183 | 0x0001 2 0 Command failed due to ICRC error
|
---|
184 | 0x0002 2 0 R_ERR response for data FIS
|
---|
185 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
---|
186 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
---|
187 | 0x0005 2 0 R_ERR response for non-data FIS
|
---|
188 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
---|
189 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
---|
190 | 0x0008 2 0 Device-to-host non-data FIS retries
|
---|
191 | 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy
|
---|
192 | 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
|
---|
193 | 0x000b 2 0 CRC errors within host-to-device FIS
|
---|
194 | 0x000d 2 0 Non-CRC errors within host-to-device FIS
|
---|
195 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
---|
196 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
---|
197 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
---|
198 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
---|