1 | smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.1.30-std481-amd64] (local build) |
---|
2 | Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org |
---|
3 | |
---|
4 | === START OF INFORMATION SECTION === |
---|
5 | Device Model: WDC WD1004FBYZ-01YCBB1 |
---|
6 | Serial Number: WD-WMC6M0DA69V2 |
---|
7 | LU WWN Device Id: 5 0014ee 0aee5516f |
---|
8 | Firmware Version: RR04 |
---|
9 | User Capacity: 1,000,204,886,016 bytes [1.00 TB] |
---|
10 | Sector Size: 512 bytes logical/physical |
---|
11 | Rotation Rate: 7200 rpm |
---|
12 | Form Factor: 3.5 inches |
---|
13 | Device is: Not in smartctl database [for details use: -P showall] |
---|
14 | ATA Version is: ACS-3 T13/2161-D revision 5 |
---|
15 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) |
---|
16 | Local Time is: Wed Sep 21 18:38:17 2016 UTC |
---|
17 | SMART support is: Available - device has SMART capability. |
---|
18 | SMART support is: Enabled |
---|
19 | AAM feature is: Unavailable |
---|
20 | APM level is: 96 (intermediate level with standby) |
---|
21 | Rd look-ahead is: Enabled |
---|
22 | Write cache is: Enabled |
---|
23 | ATA Security is: Disabled, frozen [SEC2] |
---|
24 | Wt Cache Reorder: Enabled |
---|
25 | |
---|
26 | === START OF READ SMART DATA SECTION === |
---|
27 | SMART overall-health self-assessment test result: PASSED |
---|
28 | |
---|
29 | General SMART Values: |
---|
30 | Offline data collection status: (0x00) Offline data collection activity |
---|
31 | was never started. |
---|
32 | Auto Offline Data Collection: Disabled. |
---|
33 | Self-test execution status: ( 0) The previous self-test routine completed |
---|
34 | without error or no self-test has ever |
---|
35 | been run. |
---|
36 | Total time to complete Offline |
---|
37 | data collection: ( 0) seconds. |
---|
38 | Offline data collection |
---|
39 | capabilities: (0x7b) SMART execute Offline immediate. |
---|
40 | Auto Offline data collection on/off support. |
---|
41 | Suspend Offline collection upon new |
---|
42 | command. |
---|
43 | Offline surface scan supported. |
---|
44 | Self-test supported. |
---|
45 | Conveyance Self-test supported. |
---|
46 | Selective Self-test supported. |
---|
47 | SMART capabilities: (0x0003) Saves SMART data before entering |
---|
48 | power-saving mode. |
---|
49 | Supports SMART auto save timer. |
---|
50 | Error logging capability: (0x01) Error logging supported. |
---|
51 | General Purpose Logging supported. |
---|
52 | Short self-test routine |
---|
53 | recommended polling time: ( 2) minutes. |
---|
54 | Extended self-test routine |
---|
55 | recommended polling time: ( 113) minutes. |
---|
56 | Conveyance self-test routine |
---|
57 | recommended polling time: ( 5) minutes. |
---|
58 | SCT capabilities: (0x003d) SCT Status supported. |
---|
59 | SCT Error Recovery Control supported. |
---|
60 | SCT Feature Control supported. |
---|
61 | SCT Data Table supported. |
---|
62 | |
---|
63 | SMART Attributes Data Structure revision number: 16 |
---|
64 | Vendor Specific SMART Attributes with Thresholds: |
---|
65 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE |
---|
66 | 1 Raw_Read_Error_Rate POSR-K 100 253 051 - 0 |
---|
67 | 3 Spin_Up_Time POS--K 100 253 021 - 0 |
---|
68 | 4 Start_Stop_Count -O--CK 100 100 000 - 2 |
---|
69 | 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 |
---|
70 | 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 |
---|
71 | 9 Power_On_Hours -O--CK 100 100 000 - 0 |
---|
72 | 10 Spin_Retry_Count -O--CK 100 253 000 - 0 |
---|
73 | 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 |
---|
74 | 12 Power_Cycle_Count -O--CK 100 100 000 - 2 |
---|
75 | 16 Unknown_Attribute -O---K 000 200 000 - 14476 |
---|
76 | 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 |
---|
77 | 192 Power-Off_Retract_Count -O--CK 200 200 000 - 0 |
---|
78 | 193 Load_Cycle_Count -O--CK 200 200 000 - 2 |
---|
79 | 194 Temperature_Celsius -O---K 105 105 000 - 38 |
---|
80 | 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 |
---|
81 | 197 Current_Pending_Sector -O--CK 200 200 000 - 0 |
---|
82 | 198 Offline_Uncorrectable ----CK 100 253 000 - 0 |
---|
83 | 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 |
---|
84 | 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 |
---|
85 | ||||||_ K auto-keep |
---|
86 | |||||__ C event count |
---|
87 | ||||___ R error rate |
---|
88 | |||____ S speed/performance |
---|
89 | ||_____ O updated online |
---|
90 | |______ P prefailure warning |
---|
91 | |
---|
92 | General Purpose Log Directory Version 1 |
---|
93 | SMART Log Directory Version 1 [multi-sector log support] |
---|
94 | Address Access R/W Size Description |
---|
95 | 0x00 GPL,SL R/O 1 Log Directory |
---|
96 | 0x01 SL R/O 1 Summary SMART error log |
---|
97 | 0x02 SL R/O 5 Comprehensive SMART error log |
---|
98 | 0x03 GPL R/O 6 Ext. Comprehensive SMART error log |
---|
99 | 0x04 GPL,SL R/O 8 Device Statistics log |
---|
100 | 0x06 SL R/O 1 SMART self-test log |
---|
101 | 0x07 GPL R/O 1 Extended self-test log |
---|
102 | 0x08 GPL R/O 2 Power Conditions log |
---|
103 | 0x09 SL R/W 1 Selective self-test log |
---|
104 | 0x0a GPL R/W 8 Device Statistics Notification |
---|
105 | 0x0c GPL R/O 113 Pending Defects log |
---|
106 | 0x0d GPL,SL R/O 8 LPS Mis-alignment log |
---|
107 | 0x10 GPL R/O 1 SATA NCQ Queued Error log |
---|
108 | 0x11 GPL R/O 1 SATA Phy Event Counters log |
---|
109 | 0x13 GPL R/O 1 SATA NCQ Send and Receive log |
---|
110 | 0x24 GPL R/O 189 Current Device Internal Status Data log |
---|
111 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log |
---|
112 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log |
---|
113 | 0xa0-0xb6 GPL,SL VS 16 Device vendor specific log |
---|
114 | 0xb7 GPL,SL VS 39 Device vendor specific log |
---|
115 | 0xc0 GPL,SL VS 1 Device vendor specific log |
---|
116 | 0xe0 GPL,SL R/W 1 SCT Command/Status |
---|
117 | 0xe1 GPL,SL R/W 1 SCT Data Transfer |
---|
118 | |
---|
119 | SMART Extended Comprehensive Error Log Version: 1 (6 sectors) |
---|
120 | No Errors Logged |
---|
121 | |
---|
122 | SMART Extended Self-test Log Version: 1 (1 sectors) |
---|
123 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error |
---|
124 | # 1 Short offline Completed without error 00% 0 - |
---|
125 | |
---|
126 | SMART Selective self-test log data structure revision number 1 |
---|
127 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
---|
128 | 1 0 0 Not_testing |
---|
129 | 2 0 0 Not_testing |
---|
130 | 3 0 0 Not_testing |
---|
131 | 4 0 0 Not_testing |
---|
132 | 5 0 0 Not_testing |
---|
133 | Selective self-test flags (0x0): |
---|
134 | After scanning selected spans, do NOT read-scan remainder of disk. |
---|
135 | If Selective self-test is pending on power-up, resume after 0 minute delay. |
---|
136 | |
---|
137 | SCT Status Version: 3 |
---|
138 | SCT Version (vendor specific): 258 (0x0102) |
---|
139 | SCT Support Level: 1 |
---|
140 | Device State: Active (0) |
---|
141 | Current Temperature: 38 Celsius |
---|
142 | Power Cycle Min/Max Temperature: 30/38 Celsius |
---|
143 | Lifetime Min/Max Temperature: 30/38 Celsius |
---|
144 | Under/Over Temperature Limit Count: 0/0 |
---|
145 | Vendor specific: |
---|
146 | 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
---|
147 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
---|
148 | |
---|
149 | SCT Temperature History Version: 2 |
---|
150 | Temperature Sampling Period: 1 minute |
---|
151 | Temperature Logging Interval: 1 minute |
---|
152 | Min/Max recommended Temperature: 0/60 Celsius |
---|
153 | Min/Max Temperature Limit: -41/85 Celsius |
---|
154 | Temperature History Size (Index): 478 (28) |
---|
155 | |
---|
156 | Index Estimated Time Temperature Celsius |
---|
157 | 29 2016-09-21 10:41 ? - |
---|
158 | ... ..(448 skipped). .. - |
---|
159 | 0 2016-09-21 18:10 ? - |
---|
160 | 1 2016-09-21 18:11 30 *********** |
---|
161 | ... ..( 2 skipped). .. *********** |
---|
162 | 4 2016-09-21 18:14 30 *********** |
---|
163 | 5 2016-09-21 18:15 31 ************ |
---|
164 | 6 2016-09-21 18:16 ? - |
---|
165 | 7 2016-09-21 18:17 30 *********** |
---|
166 | ... ..( 2 skipped). .. *********** |
---|
167 | 10 2016-09-21 18:20 30 *********** |
---|
168 | 11 2016-09-21 18:21 31 ************ |
---|
169 | 12 2016-09-21 18:22 31 ************ |
---|
170 | 13 2016-09-21 18:23 32 ************* |
---|
171 | 14 2016-09-21 18:24 33 ************** |
---|
172 | 15 2016-09-21 18:25 33 ************** |
---|
173 | 16 2016-09-21 18:26 34 *************** |
---|
174 | 17 2016-09-21 18:27 35 **************** |
---|
175 | ... ..( 2 skipped). .. **************** |
---|
176 | 20 2016-09-21 18:30 35 **************** |
---|
177 | 21 2016-09-21 18:31 36 ***************** |
---|
178 | 22 2016-09-21 18:32 36 ***************** |
---|
179 | 23 2016-09-21 18:33 37 ****************** |
---|
180 | ... ..( 3 skipped). .. ****************** |
---|
181 | 27 2016-09-21 18:37 37 ****************** |
---|
182 | 28 2016-09-21 18:38 38 ******************* |
---|
183 | |
---|
184 | SCT Error Recovery Control: |
---|
185 | Read: 70 (7.0 seconds) |
---|
186 | Write: 70 (7.0 seconds) |
---|
187 | |
---|
188 | Device Statistics (GP Log 0x04) |
---|
189 | Page Offset Size Value Flags Description |
---|
190 | 0x01 ===== = = === == General Statistics (rev 1) == |
---|
191 | 0x01 0x008 4 2 -D- Lifetime Power-On Resets |
---|
192 | 0x01 0x010 4 0 -D- Power-on Hours |
---|
193 | 0x01 0x018 6 0 -D- Logical Sectors Written |
---|
194 | 0x01 0x020 6 0 -D- Number of Write Commands |
---|
195 | 0x01 0x028 6 14476 -D- Logical Sectors Read |
---|
196 | 0x01 0x030 6 462 -D- Number of Read Commands |
---|
197 | 0x01 0x038 6 0 -D- Date and Time TimeStamp |
---|
198 | 0x01 0x048 2 - ND- Workload Utilization |
---|
199 | 0x03 ===== = = === == Rotating Media Statistics (rev 1) == |
---|
200 | 0x03 0x008 4 0 -D- Spindle Motor Power-on Hours |
---|
201 | 0x03 0x010 4 0 -D- Head Flying Hours |
---|
202 | 0x03 0x018 4 2 -D- Head Load Events |
---|
203 | 0x03 0x020 4 0 -D- Number of Reallocated Logical Sectors |
---|
204 | 0x03 0x028 4 0 -D- Read Recovery Attempts |
---|
205 | 0x03 0x030 4 0 -D- Number of Mechanical Start Failures |
---|
206 | 0x03 0x038 4 0 -D- Number of Realloc. Candidate Logical Sectors |
---|
207 | 0x03 0x040 4 0 -D- Number of High Priority Unload Events |
---|
208 | 0x04 ===== = = === == General Errors Statistics (rev 1) == |
---|
209 | 0x04 0x008 4 0 -D- Number of Reported Uncorrectable Errors |
---|
210 | 0x04 0x010 4 0 -D- Resets Between Cmd Acceptance and Completion |
---|
211 | 0x05 ===== = = === == Temperature Statistics (rev 1) == |
---|
212 | 0x05 0x008 1 38 -D- Current Temperature |
---|
213 | 0x05 0x010 1 - -D- Average Short Term Temperature |
---|
214 | 0x05 0x018 1 - -D- Average Long Term Temperature |
---|
215 | 0x05 0x020 1 38 -D- Highest Temperature |
---|
216 | 0x05 0x028 1 33 -D- Lowest Temperature |
---|
217 | 0x05 0x030 1 - -D- Highest Average Short Term Temperature |
---|
218 | 0x05 0x038 1 - -D- Lowest Average Short Term Temperature |
---|
219 | 0x05 0x040 1 - -D- Highest Average Long Term Temperature |
---|
220 | 0x05 0x048 1 - -D- Lowest Average Long Term Temperature |
---|
221 | 0x05 0x050 4 0 -D- Time in Over-Temperature |
---|
222 | 0x05 0x058 1 60 -D- Specified Maximum Operating Temperature |
---|
223 | 0x05 0x060 4 0 -D- Time in Under-Temperature |
---|
224 | 0x05 0x068 1 0 -D- Specified Minimum Operating Temperature |
---|
225 | 0x06 ===== = = === == Transport Statistics (rev 1) == |
---|
226 | 0x06 0x008 4 4 -D- Number of Hardware Resets |
---|
227 | 0x06 0x010 4 2 -D- Number of ASR Events |
---|
228 | 0x06 0x018 4 0 -D- Number of Interface CRC Errors |
---|
229 | |||_ C monitored condition met |
---|
230 | ||__ D supports DSN |
---|
231 | |___ N normalized value |
---|
232 | |
---|
233 | SATA Phy Event Counters (GP Log 0x11) |
---|
234 | ID Size Value Description |
---|
235 | 0x0001 2 0 Command failed due to ICRC error |
---|
236 | 0x0002 2 0 R_ERR response for data FIS |
---|
237 | 0x0003 2 0 R_ERR response for device-to-host data FIS |
---|
238 | 0x0004 2 0 R_ERR response for host-to-device data FIS |
---|
239 | 0x0005 2 0 R_ERR response for non-data FIS |
---|
240 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS |
---|
241 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS |
---|
242 | 0x0008 2 0 Device-to-host non-data FIS retries |
---|
243 | 0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy |
---|
244 | 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET |
---|
245 | 0x000b 2 0 CRC errors within host-to-device FIS |
---|
246 | 0x000d 2 0 Non-CRC errors within host-to-device FIS |
---|
247 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC |
---|
248 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC |
---|
249 | 0x8000 4 0 Vendor specific |
---|
250 | |
---|