| 1 | smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-24-generic] (local build)
|
|---|
| 2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: KingSpec KDM-SA.51-008GMJ
|
|---|
| 6 | Firmware Version: 1.092.37
|
|---|
| 7 | User Capacity: 8,011,120,640 bytes [8.01 GB]
|
|---|
| 8 | Sector Size: 512 bytes logical/physical
|
|---|
| 9 | Rotation Rate: Solid State Device
|
|---|
| 10 | Form Factor: 2.5 inches
|
|---|
| 11 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 12 | ATA Version is: ACS-2 T13/2015-D revision 3
|
|---|
| 13 | SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
|
|---|
| 14 | Local Time is: Tue Sep 20 17:37:58 2016 EDT
|
|---|
| 15 | SMART support is: Available - device has SMART capability.
|
|---|
| 16 | SMART support is: Enabled
|
|---|
| 17 | AAM feature is: Unavailable
|
|---|
| 18 | APM level is: 254 (maximum performance)
|
|---|
| 19 | Rd look-ahead is: Enabled
|
|---|
| 20 | Write cache is: Enabled
|
|---|
| 21 | ATA Security is: Disabled, frozen [SEC2]
|
|---|
| 22 | Wt Cache Reorder: Enabled
|
|---|
| 23 |
|
|---|
| 24 | === START OF READ SMART DATA SECTION ===
|
|---|
| 25 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 26 |
|
|---|
| 27 | General SMART Values:
|
|---|
| 28 | Offline data collection status: (0x00) Offline data collection activity
|
|---|
| 29 | was never started.
|
|---|
| 30 | Auto Offline Data Collection: Disabled.
|
|---|
| 31 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 32 | without error or no self-test has ever
|
|---|
| 33 | been run.
|
|---|
| 34 | Total time to complete Offline
|
|---|
| 35 | data collection: ( 32) seconds.
|
|---|
| 36 | Offline data collection
|
|---|
| 37 | capabilities: (0x5b) SMART execute Offline immediate.
|
|---|
| 38 | Auto Offline data collection on/off support.
|
|---|
| 39 | Suspend Offline collection upon new
|
|---|
| 40 | command.
|
|---|
| 41 | Offline surface scan supported.
|
|---|
| 42 | Self-test supported.
|
|---|
| 43 | No Conveyance Self-test supported.
|
|---|
| 44 | Selective Self-test supported.
|
|---|
| 45 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 46 | power-saving mode.
|
|---|
| 47 | Supports SMART auto save timer.
|
|---|
| 48 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 49 | General Purpose Logging supported.
|
|---|
| 50 | Short self-test routine
|
|---|
| 51 | recommended polling time: ( 1) minutes.
|
|---|
| 52 | Extended self-test routine
|
|---|
| 53 | recommended polling time: ( 1) minutes.
|
|---|
| 54 | SCT capabilities: (0x0039) SCT Status supported.
|
|---|
| 55 | SCT Error Recovery Control supported.
|
|---|
| 56 | SCT Feature Control supported.
|
|---|
| 57 | SCT Data Table supported.
|
|---|
| 58 |
|
|---|
| 59 | SMART Attributes Data Structure revision number: 0
|
|---|
| 60 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 61 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 62 | 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0
|
|---|
| 63 | 2 Throughput_Performance P-S--- 100 100 050 - 0
|
|---|
| 64 | 3 Spin_Up_Time POS--- 100 100 050 - 0
|
|---|
| 65 | 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0
|
|---|
| 66 | 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0
|
|---|
| 67 | 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0
|
|---|
| 68 | 9 Power_On_Hours -O--C- 100 100 000 - 4325
|
|---|
| 69 | 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0
|
|---|
| 70 | 12 Power_Cycle_Count -O--C- 100 100 000 - 20
|
|---|
| 71 | 167 Unknown_Attribute -O---K 100 100 000 - 0
|
|---|
| 72 | 168 Unknown_Attribute -O--C- 100 100 000 - 1
|
|---|
| 73 | 169 Unknown_Attribute PO--C- 100 100 010 - 131074
|
|---|
| 74 | 170 Unknown_Attribute PO--C- 100 100 010 - 0
|
|---|
| 75 | 173 Unknown_Attribute -O--C- 001 001 000 - 4297064457
|
|---|
| 76 | 175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0
|
|---|
| 77 | 180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 68
|
|---|
| 78 | 192 Power-Off_Retract_Count -O--C- 100 100 000 - 19
|
|---|
| 79 | 194 Temperature_Celsius -O---K 075 075 030 - 25 (0 60 0 30 0)
|
|---|
| 80 | 197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
|---|
| 81 | 231 Temperature_Celsius PO--CK 100 100 005 - 0
|
|---|
| 82 | 240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0
|
|---|
| 83 | 241 Total_LBAs_Written -O--CK 100 100 000 - 85380422
|
|---|
| 84 | 242 Total_LBAs_Read -O--CK 100 100 000 - 32641596
|
|---|
| 85 | ||||||_ K auto-keep
|
|---|
| 86 | |||||__ C event count
|
|---|
| 87 | ||||___ R error rate
|
|---|
| 88 | |||____ S speed/performance
|
|---|
| 89 | ||_____ O updated online
|
|---|
| 90 | |______ P prefailure warning
|
|---|
| 91 |
|
|---|
| 92 | General Purpose Log Directory Version 1
|
|---|
| 93 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 94 | Address Access R/W Size Description
|
|---|
| 95 | 0x00 GPL,SL R/O 1 Log Directory
|
|---|
| 96 | 0x01 SL R/O 1 Summary SMART error log
|
|---|
| 97 | 0x02 SL R/O 51 Comprehensive SMART error log
|
|---|
| 98 | 0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
|---|
| 99 | 0x04 GPL,SL R/O 8 Device Statistics log
|
|---|
| 100 | 0x06 SL R/O 1 SMART self-test log
|
|---|
| 101 | 0x07 GPL R/O 1 Extended self-test log
|
|---|
| 102 | 0x09 SL R/W 1 Selective self-test log
|
|---|
| 103 | 0x10 GPL R/O 1 SATA NCQ Queued Error log
|
|---|
| 104 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
|---|
| 105 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|---|
| 106 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|---|
| 107 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
|---|
| 108 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|---|
| 109 |
|
|---|
| 110 | SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
|---|
| 111 | No Errors Logged
|
|---|
| 112 |
|
|---|
| 113 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
|---|
| 114 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 115 | # 1 Short offline Completed without error 00% 4325 -
|
|---|
| 116 |
|
|---|
| 117 | SMART Selective self-test log data structure revision number 1
|
|---|
| 118 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 119 | 1 0 0 Not_testing
|
|---|
| 120 | 2 0 0 Not_testing
|
|---|
| 121 | 3 0 0 Not_testing
|
|---|
| 122 | 4 0 0 Not_testing
|
|---|
| 123 | 5 0 0 Not_testing
|
|---|
| 124 | Selective self-test flags (0x0):
|
|---|
| 125 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 126 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 127 |
|
|---|
| 128 | SCT Status Version: 3
|
|---|
| 129 | SCT Version (vendor specific): 1 (0x0001)
|
|---|
| 130 | SCT Support Level: 0
|
|---|
| 131 | Device State: Active (0)
|
|---|
| 132 | Current Temperature: 0 Celsius
|
|---|
| 133 | Power Cycle Max Temperature: 0 Celsius
|
|---|
| 134 | Lifetime Max Temperature: 0 Celsius
|
|---|
| 135 |
|
|---|
| 136 | SCT Temperature History Version: 2
|
|---|
| 137 | Temperature Sampling Period: 1 minute
|
|---|
| 138 | Temperature Logging Interval: 1 minute
|
|---|
| 139 | Min/Max recommended Temperature: -127/127 Celsius
|
|---|
| 140 | Min/Max Temperature Limit: -127/127 Celsius
|
|---|
| 141 | Temperature History Size (Index): 478 (50)
|
|---|
| 142 |
|
|---|
| 143 | Index Estimated Time Temperature Celsius
|
|---|
| 144 | 51 2016-09-20 09:40 25 ******
|
|---|
| 145 | ... ..( 30 skipped). .. ******
|
|---|
| 146 | 82 2016-09-20 10:11 25 ******
|
|---|
| 147 | 83 2016-09-20 10:12 ? -
|
|---|
| 148 | 84 2016-09-20 10:13 25 ******
|
|---|
| 149 | ... ..(443 skipped). .. ******
|
|---|
| 150 | 50 2016-09-20 17:37 25 ******
|
|---|
| 151 |
|
|---|
| 152 | SCT Error Recovery Control:
|
|---|
| 153 | Read: 70 (7.0 seconds)
|
|---|
| 154 | Write: 70 (7.0 seconds)
|
|---|
| 155 |
|
|---|
| 156 | Device Statistics (GP Log 0x04)
|
|---|
| 157 | Page Offset Size Value Flags Description
|
|---|
| 158 | 0x01 ===== = = === == General Statistics (rev 2) ==
|
|---|
| 159 | 0x01 0x008 4 20 --- Lifetime Power-On Resets
|
|---|
| 160 | 0x01 0x018 6 85379782 --- Logical Sectors Written
|
|---|
| 161 | 0x01 0x020 6 719483 --- Number of Write Commands
|
|---|
| 162 | 0x01 0x028 6 32641596 --- Logical Sectors Read
|
|---|
| 163 | 0x01 0x030 6 439433 --- Number of Read Commands
|
|---|
| 164 | 0x01 0x038 6 15570000000 --- Date and Time TimeStamp
|
|---|
| 165 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
|---|
| 166 | 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|
|---|
| 167 | |||_ C monitored condition met
|
|---|
| 168 | ||__ D supports DSN
|
|---|
| 169 | |___ N normalized value
|
|---|
| 170 |
|
|---|
| 171 | SATA Phy Event Counters (GP Log 0x11)
|
|---|
| 172 | ID Size Value Description
|
|---|
| 173 | 0x0001 2 1 Command failed due to ICRC error
|
|---|
| 174 | 0x0002 2 0 R_ERR response for data FIS
|
|---|
| 175 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
|---|
| 176 | 0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy
|
|---|
| 177 | 0x000a 4 6 Device-to-host register FISes sent due to a COMRESET
|
|---|
| 178 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|---|
| 179 |
|
|---|
