1 | smartctl 6.5 2016-05-07 r4318 [x86_64-w64-mingw32-win7-sp1] (sf-6.5-1) |
---|
2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org |
---|
3 | |
---|
4 | === START OF INFORMATION SECTION === |
---|
5 | Model Family: Western Digital Elements / My Passport (USB, AF) |
---|
6 | Device Model: WDC WD20NMVW-11EDZS7 |
---|
7 | Serial Number: WD-WX31A467LJ9X |
---|
8 | LU WWN Device Id: 5 0014ee 20d7536bc |
---|
9 | Firmware Version: 01.01A01 |
---|
10 | User Capacity: 2,000,365,380,096 bytes [2.00 TB] |
---|
11 | Sector Sizes: 512 bytes logical, 4096 bytes physical |
---|
12 | Rotation Rate: 5200 rpm |
---|
13 | Device is: In smartctl database [for details use: -P show] |
---|
14 | ATA Version is: ACS-2 (minor revision not indicated) |
---|
15 | SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) |
---|
16 | Local Time is: Fri Sep 02 12:10:59 2016 PDT |
---|
17 | SMART support is: Available - device has SMART capability. |
---|
18 | SMART support is: Enabled |
---|
19 | AAM feature is: Unavailable |
---|
20 | APM level is: 128 (minimum power consumption without standby) |
---|
21 | Rd look-ahead is: Enabled |
---|
22 | Write cache is: Enabled |
---|
23 | ATA Security is: Disabled, NOT FROZEN [SEC1] |
---|
24 | Wt Cache Reorder: Enabled |
---|
25 | |
---|
26 | === START OF READ SMART DATA SECTION === |
---|
27 | SMART overall-health self-assessment test result: PASSED |
---|
28 | |
---|
29 | General SMART Values: |
---|
30 | Offline data collection status: (0x00) Offline data collection activity |
---|
31 | was never started. |
---|
32 | Auto Offline Data Collection: Disabled. |
---|
33 | Self-test execution status: ( 0) The previous self-test routine completed |
---|
34 | without error or no self-test has ever |
---|
35 | been run. |
---|
36 | Total time to complete Offline |
---|
37 | data collection: (36720) seconds. |
---|
38 | Offline data collection |
---|
39 | capabilities: (0x7b) SMART execute Offline immediate. |
---|
40 | Auto Offline data collection on/off support. |
---|
41 | Suspend Offline collection upon new |
---|
42 | command. |
---|
43 | Offline surface scan supported. |
---|
44 | Self-test supported. |
---|
45 | Conveyance Self-test supported. |
---|
46 | Selective Self-test supported. |
---|
47 | SMART capabilities: (0x0003) Saves SMART data before entering |
---|
48 | power-saving mode. |
---|
49 | Supports SMART auto save timer. |
---|
50 | Error logging capability: (0x01) Error logging supported. |
---|
51 | General Purpose Logging supported. |
---|
52 | Short self-test routine |
---|
53 | recommended polling time: ( 2) minutes. |
---|
54 | Extended self-test routine |
---|
55 | recommended polling time: ( 405) minutes. |
---|
56 | Conveyance self-test routine |
---|
57 | recommended polling time: ( 5) minutes. |
---|
58 | SCT capabilities: (0x7035) SCT Status supported. |
---|
59 | SCT Feature Control supported. |
---|
60 | SCT Data Table supported. |
---|
61 | |
---|
62 | SMART Attributes Data Structure revision number: 16 |
---|
63 | Vendor Specific SMART Attributes with Thresholds: |
---|
64 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE |
---|
65 | 1 Raw_Read_Error_Rate POSR-K 100 253 051 - 0 |
---|
66 | 3 Spin_Up_Time POS--K 100 253 021 - 0 |
---|
67 | 4 Start_Stop_Count -O--CK 100 100 000 - 7 |
---|
68 | 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 |
---|
69 | 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 |
---|
70 | 9 Power_On_Hours -O--CK 100 100 000 - 0 |
---|
71 | 10 Spin_Retry_Count -O--CK 100 253 000 - 0 |
---|
72 | 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 |
---|
73 | 12 Power_Cycle_Count -O--CK 100 100 000 - 7 |
---|
74 | 192 Power-Off_Retract_Count -O--CK 200 200 000 - 3 |
---|
75 | 193 Load_Cycle_Count -O--CK 200 200 000 - 9 |
---|
76 | 194 Temperature_Celsius -O---K 117 113 000 - 35 |
---|
77 | 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 |
---|
78 | 197 Current_Pending_Sector -O--CK 200 200 000 - 0 |
---|
79 | 198 Offline_Uncorrectable ----CK 100 253 000 - 0 |
---|
80 | 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 |
---|
81 | 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 |
---|
82 | ||||||_ K auto-keep |
---|
83 | |||||__ C event count |
---|
84 | ||||___ R error rate |
---|
85 | |||____ S speed/performance |
---|
86 | ||_____ O updated online |
---|
87 | |______ P prefailure warning |
---|
88 | |
---|
89 | General Purpose Log Directory Version 1 |
---|
90 | SMART Log Directory Version 1 [multi-sector log support] |
---|
91 | Address Access R/W Size Description |
---|
92 | 0x00 GPL,SL R/O 1 Log Directory |
---|
93 | 0x01 SL R/O 1 Summary SMART error log |
---|
94 | 0x02 SL R/O 5 Comprehensive SMART error log |
---|
95 | 0x03 GPL R/O 6 Ext. Comprehensive SMART error log |
---|
96 | 0x06 SL R/O 1 SMART self-test log |
---|
97 | 0x07 GPL R/O 1 Extended self-test log |
---|
98 | 0x09 SL R/W 1 Selective self-test log |
---|
99 | 0x10 GPL R/O 1 SATA NCQ Queued Error log |
---|
100 | 0x11 GPL R/O 1 SATA Phy Event Counters log |
---|
101 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log |
---|
102 | 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log |
---|
103 | 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log |
---|
104 | 0xb7 GPL,SL VS 39 Device vendor specific log |
---|
105 | 0xbd GPL,SL VS 1 Device vendor specific log |
---|
106 | 0xc0 GPL,SL VS 1 Device vendor specific log |
---|
107 | 0xc1 GPL VS 93 Device vendor specific log |
---|
108 | 0xcf GPL VS 65535 Device vendor specific log |
---|
109 | 0xe0 GPL,SL R/W 1 SCT Command/Status |
---|
110 | 0xe1 GPL,SL R/W 1 SCT Data Transfer |
---|
111 | |
---|
112 | SMART Extended Comprehensive Error Log Version: 1 (6 sectors) |
---|
113 | No Errors Logged |
---|
114 | |
---|
115 | SMART Extended Self-test Log Version: 1 (1 sectors) |
---|
116 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error |
---|
117 | # 1 Short offline Completed without error 00% 0 - |
---|
118 | |
---|
119 | SMART Selective self-test log data structure revision number 1 |
---|
120 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
---|
121 | 1 0 0 Not_testing |
---|
122 | 2 0 0 Not_testing |
---|
123 | 3 0 0 Not_testing |
---|
124 | 4 0 0 Not_testing |
---|
125 | 5 0 0 Not_testing |
---|
126 | Selective self-test flags (0x0): |
---|
127 | After scanning selected spans, do NOT read-scan remainder of disk. |
---|
128 | If Selective self-test is pending on power-up, resume after 0 minute delay. |
---|
129 | |
---|
130 | SCT Status Version: 3 |
---|
131 | SCT Version (vendor specific): 258 (0x0102) |
---|
132 | SCT Support Level: 1 |
---|
133 | Device State: Active (0) |
---|
134 | Current Temperature: 35 Celsius |
---|
135 | Power Cycle Min/Max Temperature: 21/39 Celsius |
---|
136 | Lifetime Min/Max Temperature: 21/39 Celsius |
---|
137 | Under/Over Temperature Limit Count: 0/0 |
---|
138 | Vendor specific: |
---|
139 | 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
---|
140 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
---|
141 | |
---|
142 | SCT Temperature History Version: 2 |
---|
143 | Temperature Sampling Period: 1 minute |
---|
144 | Temperature Logging Interval: 1 minute |
---|
145 | Min/Max recommended Temperature: 0/60 Celsius |
---|
146 | Min/Max Temperature Limit: -41/85 Celsius |
---|
147 | Temperature History Size (Index): 128 (53) |
---|
148 | |
---|
149 | Index Estimated Time Temperature Celsius |
---|
150 | 54 2016-09-02 10:03 ? - |
---|
151 | ... ..( 73 skipped). .. - |
---|
152 | 0 2016-09-02 11:17 ? - |
---|
153 | 1 2016-09-02 11:18 26 ******* |
---|
154 | 2 2016-09-02 11:19 ? - |
---|
155 | 3 2016-09-02 11:20 27 ******** |
---|
156 | 4 2016-09-02 11:21 ? - |
---|
157 | 5 2016-09-02 11:22 27 ******** |
---|
158 | 6 2016-09-02 11:23 ? - |
---|
159 | 7 2016-09-02 11:24 27 ******** |
---|
160 | 8 2016-09-02 11:25 ? - |
---|
161 | 9 2016-09-02 11:26 27 ******** |
---|
162 | 10 2016-09-02 11:27 ? - |
---|
163 | 11 2016-09-02 11:28 26 ******* |
---|
164 | 12 2016-09-02 11:29 ? - |
---|
165 | 13 2016-09-02 11:30 21 ** |
---|
166 | 14 2016-09-02 11:31 21 ** |
---|
167 | 15 2016-09-02 11:32 22 *** |
---|
168 | 16 2016-09-02 11:33 23 **** |
---|
169 | 17 2016-09-02 11:34 24 ***** |
---|
170 | 18 2016-09-02 11:35 25 ****** |
---|
171 | 19 2016-09-02 11:36 26 ******* |
---|
172 | 20 2016-09-02 11:37 27 ******** |
---|
173 | 21 2016-09-02 11:38 28 ********* |
---|
174 | 22 2016-09-02 11:39 29 ********** |
---|
175 | 23 2016-09-02 11:40 30 *********** |
---|
176 | 24 2016-09-02 11:41 31 ************ |
---|
177 | 25 2016-09-02 11:42 31 ************ |
---|
178 | 26 2016-09-02 11:43 32 ************* |
---|
179 | 27 2016-09-02 11:44 33 ************** |
---|
180 | 28 2016-09-02 11:45 33 ************** |
---|
181 | 29 2016-09-02 11:46 34 *************** |
---|
182 | 30 2016-09-02 11:47 34 *************** |
---|
183 | 31 2016-09-02 11:48 35 **************** |
---|
184 | 32 2016-09-02 11:49 36 ***************** |
---|
185 | 33 2016-09-02 11:50 36 ***************** |
---|
186 | 34 2016-09-02 11:51 36 ***************** |
---|
187 | 35 2016-09-02 11:52 37 ****************** |
---|
188 | 36 2016-09-02 11:53 37 ****************** |
---|
189 | 37 2016-09-02 11:54 38 ******************* |
---|
190 | 38 2016-09-02 11:55 39 ******************** |
---|
191 | 39 2016-09-02 11:56 38 ******************* |
---|
192 | 40 2016-09-02 11:57 37 ****************** |
---|
193 | 41 2016-09-02 11:58 37 ****************** |
---|
194 | 42 2016-09-02 11:59 37 ****************** |
---|
195 | 43 2016-09-02 12:00 36 ***************** |
---|
196 | ... ..( 2 skipped). .. ***************** |
---|
197 | 46 2016-09-02 12:03 36 ***************** |
---|
198 | 47 2016-09-02 12:04 35 **************** |
---|
199 | ... ..( 5 skipped). .. **************** |
---|
200 | 53 2016-09-02 12:10 35 **************** |
---|
201 | |
---|
202 | SCT Error Recovery Control command not supported |
---|
203 | |
---|
204 | Device Statistics (GP/SMART Log 0x04) not supported |
---|
205 | |
---|
206 | SATA Phy Event Counters (GP Log 0x11) |
---|
207 | ID Size Value Description |
---|
208 | 0x0001 2 0 Command failed due to ICRC error |
---|
209 | 0x0002 2 0 R_ERR response for data FIS |
---|
210 | 0x0003 2 0 R_ERR response for device-to-host data FIS |
---|
211 | 0x0004 2 0 R_ERR response for host-to-device data FIS |
---|
212 | 0x0005 2 0 R_ERR response for non-data FIS |
---|
213 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS |
---|
214 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS |
---|
215 | 0x0008 2 0 Device-to-host non-data FIS retries |
---|
216 | 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy |
---|
217 | 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET |
---|
218 | 0x000b 2 0 CRC errors within host-to-device FIS |
---|
219 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC |
---|
220 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC |
---|
221 | 0x8000 4 2407 Vendor specific |
---|
222 | |
---|