1 | smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.7.0-040700-generic] (local build)
|
---|
2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Device Model: SK hynix SC210 mSATA 256GB
|
---|
6 | Serial Number: EJ57N044911107537
|
---|
7 | Firmware Version: 20002L00
|
---|
8 | User Capacity: 256,060,514,304 bytes [256 GB]
|
---|
9 | Sector Size: 512 bytes logical/physical
|
---|
10 | Rotation Rate: Solid State Device
|
---|
11 | Form Factor: mSATA
|
---|
12 | Device is: Not in smartctl database [for details use: -P showall]
|
---|
13 | ATA Version is: ATA8-ACS (minor revision not indicated)
|
---|
14 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
---|
15 | Local Time is: Tue Aug 9 21:31:37 2016 CST
|
---|
16 | SMART support is: Available - device has SMART capability.
|
---|
17 | SMART support is: Enabled
|
---|
18 | AAM feature is: Unavailable
|
---|
19 | APM level is: 254 (maximum performance)
|
---|
20 | Rd look-ahead is: Enabled
|
---|
21 | Write cache is: Enabled
|
---|
22 | ATA Security is: Disabled, frozen [SEC2]
|
---|
23 | Wt Cache Reorder: Unavailable
|
---|
24 |
|
---|
25 | === START OF READ SMART DATA SECTION ===
|
---|
26 | SMART overall-health self-assessment test result: PASSED
|
---|
27 |
|
---|
28 | General SMART Values:
|
---|
29 | Offline data collection status: (0x02) Offline data collection activity
|
---|
30 | was completed without error.
|
---|
31 | Auto Offline Data Collection: Disabled.
|
---|
32 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
33 | without error or no self-test has ever
|
---|
34 | been run.
|
---|
35 | Total time to complete Offline
|
---|
36 | data collection: ( 5) seconds.
|
---|
37 | Offline data collection
|
---|
38 | capabilities: (0x19) SMART execute Offline immediate.
|
---|
39 | No Auto Offline data collection support.
|
---|
40 | Suspend Offline collection upon new
|
---|
41 | command.
|
---|
42 | Offline surface scan supported.
|
---|
43 | Self-test supported.
|
---|
44 | No Conveyance Self-test supported.
|
---|
45 | No Selective Self-test supported.
|
---|
46 | SMART capabilities: (0x0002) Does not save SMART data before
|
---|
47 | entering power-saving mode.
|
---|
48 | Supports SMART auto save timer.
|
---|
49 | Error logging capability: (0x01) Error logging supported.
|
---|
50 | General Purpose Logging supported.
|
---|
51 | Short self-test routine
|
---|
52 | recommended polling time: ( 1) minutes.
|
---|
53 | Extended self-test routine
|
---|
54 | recommended polling time: ( 17) minutes.
|
---|
55 |
|
---|
56 | SMART Attributes Data Structure revision number: 0
|
---|
57 | Vendor Specific SMART Attributes with Thresholds:
|
---|
58 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
---|
59 | 1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
---|
60 | 5 Reallocated_Sector_Ct -O--CK 253 253 036 - 0
|
---|
61 | 9 Power_On_Hours -O--CK 099 099 000 - 1357
|
---|
62 | 12 Power_Cycle_Count -O--CK 100 100 020 - 3903
|
---|
63 | 100 Unknown_Attribute -O--CK 100 100 000 - 891646
|
---|
64 | 171 Unknown_Attribute -O--CK 253 253 000 - 0
|
---|
65 | 172 Unknown_Attribute -O--CK 253 253 000 - 0
|
---|
66 | 174 Unknown_Attribute ----CK 100 100 000 - 523
|
---|
67 | 175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
---|
68 | 176 Erase_Fail_Count_Chip -O--CK 253 253 000 - 0
|
---|
69 | 177 Wear_Leveling_Count -O--CK 100 100 000 - 13
|
---|
70 | 178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 43
|
---|
71 | 179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 159
|
---|
72 | 180 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 4193
|
---|
73 | 181 Program_Fail_Cnt_Total -O--CK 253 253 000 - 0
|
---|
74 | 182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
---|
75 | 183 Runtime_Bad_Block -O--CK 253 253 000 - 0
|
---|
76 | 187 Reported_Uncorrect -O--CK 100 100 000 - 123
|
---|
77 | 188 Command_Timeout -O--CK 253 253 000 - 0
|
---|
78 | 191 Unknown_SSD_Attribute -O--CK 253 253 000 - 0
|
---|
79 | 194 Temperature_Celsius -O---- 043 000 000 - 43 (Min/Max 20/67)
|
---|
80 | 195 Hardware_ECC_Recovered -O--CK 100 099 000 - 34224040
|
---|
81 | 201 Unknown_SSD_Attribute -OSR-- 100 100 000 - 0
|
---|
82 | 204 Soft_ECC_Correction -OSR-- 100 100 --- - 0
|
---|
83 | 231 Temperature_Celsius PO--CK 253 253 --- - 0
|
---|
84 | 234 Unknown_Attribute -O--CK 100 100 --- - 3004
|
---|
85 | 241 Total_LBAs_Written -O--CK 100 100 --- - 1835
|
---|
86 | 242 Total_LBAs_Read -O--CK 100 100 --- - 2007
|
---|
87 | 250 Read_Error_Retry_Rate -O--CK 100 100 --- - 267
|
---|
88 | ||||||_ K auto-keep
|
---|
89 | |||||__ C event count
|
---|
90 | ||||___ R error rate
|
---|
91 | |||____ S speed/performance
|
---|
92 | ||_____ O updated online
|
---|
93 | |______ P prefailure warning
|
---|
94 |
|
---|
95 | General Purpose Log Directory Version 1
|
---|
96 | SMART Log Directory Version 1 [multi-sector log support]
|
---|
97 | Address Access R/W Size Description
|
---|
98 | 0x00 GPL,SL R/O 1 Log Directory
|
---|
99 | 0x01 SL R/O 1 Summary SMART error log
|
---|
100 | 0x02 SL R/O 4 Comprehensive SMART error log
|
---|
101 | 0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
---|
102 | 0x04 GPL,SL R/O 8 Device Statistics log
|
---|
103 | 0x06 SL R/O 1 SMART self-test log
|
---|
104 | 0x07 GPL R/O 2 Extended self-test log
|
---|
105 | 0x10 GPL R/O 1 SATA NCQ Queued Error log
|
---|
106 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
---|
107 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
---|
108 |
|
---|
109 | SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
---|
110 | Device Error Count: 3468 (device log contains only the most recent 20 errors)
|
---|
111 | CR = Command Register
|
---|
112 | FEATR = Features Register
|
---|
113 | COUNT = Count (was: Sector Count) Register
|
---|
114 | LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
---|
115 | LH = LBA High (was: Cylinder High) Register ] LBA
|
---|
116 | LM = LBA Mid (was: Cylinder Low) Register ] Register
|
---|
117 | LL = LBA Low (was: Sector Number) Register ]
|
---|
118 | DV = Device (was: Device/Head) Register
|
---|
119 | DC = Device Control Register
|
---|
120 | ER = Error register
|
---|
121 | ST = Status register
|
---|
122 | Powered_Up_Time is measured from power on, and printed as
|
---|
123 | DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
---|
124 | SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
---|
125 |
|
---|
126 | Error 3468 [7] occurred at disk power-on lifetime: 1325 hours (55 days + 5 hours)
|
---|
127 | When the command that caused the error occurred, the device was active or idle.
|
---|
128 |
|
---|
129 | After command completion occurred, registers were:
|
---|
130 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
131 | -- -- -- == -- == == == -- -- -- -- --
|
---|
132 | 10 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: IDNF
|
---|
133 |
|
---|
134 | Commands leading to the command that caused the error were:
|
---|
135 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
136 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
137 | b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:00:23.440 SMART READ LOG
|
---|
138 | 20 00 00 00 01 00 00 00 00 00 00 40 40 00:00:23.440 READ SECTOR(S)
|
---|
139 | b0 00 d5 00 01 00 00 00 c2 4f 9a 00 00 00:00:23.440 SMART READ LOG
|
---|
140 | ec 00 00 00 01 00 00 00 00 00 00 40 40 00:00:23.440 IDENTIFY DEVICE
|
---|
141 | ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:22.880 IDENTIFY DEVICE
|
---|
142 |
|
---|
143 | Error 3467 [6] occurred at disk power-on lifetime: 1273 hours (53 days + 1 hours)
|
---|
144 | When the command that caused the error occurred, the device was active or idle.
|
---|
145 |
|
---|
146 | After command completion occurred, registers were:
|
---|
147 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
148 | -- -- -- == -- == == == -- -- -- -- --
|
---|
149 | 10 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: IDNF
|
---|
150 |
|
---|
151 | Commands leading to the command that caused the error were:
|
---|
152 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
153 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
154 | b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:00:08.020 SMART READ LOG
|
---|
155 | 20 00 00 00 01 00 00 00 00 00 00 40 40 00:00:08.020 READ SECTOR(S)
|
---|
156 | b0 00 d5 00 01 00 00 00 c2 4f 9a 00 00 00:00:08.000 SMART READ LOG
|
---|
157 | ec 00 00 00 01 00 00 00 00 00 00 40 40 00:00:08.000 IDENTIFY DEVICE
|
---|
158 | ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:07.450 IDENTIFY DEVICE
|
---|
159 |
|
---|
160 | Error 3466 [5] occurred at disk power-on lifetime: 1270 hours (52 days + 22 hours)
|
---|
161 | When the command that caused the error occurred, the device was active or idle.
|
---|
162 |
|
---|
163 | After command completion occurred, registers were:
|
---|
164 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
165 | -- -- -- == -- == == == -- -- -- -- --
|
---|
166 | 10 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: IDNF
|
---|
167 |
|
---|
168 | Commands leading to the command that caused the error were:
|
---|
169 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
170 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
171 | b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:00:16.660 SMART READ LOG
|
---|
172 | 20 00 00 00 01 00 00 00 00 00 00 40 40 00:00:16.660 READ SECTOR(S)
|
---|
173 | b0 00 d5 00 01 00 00 00 c2 4f 9a 00 00 00:00:16.660 SMART READ LOG
|
---|
174 | ec 00 00 00 01 00 00 00 00 00 00 40 40 00:00:16.660 IDENTIFY DEVICE
|
---|
175 | ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:16.110 IDENTIFY DEVICE
|
---|
176 |
|
---|
177 | Error 3465 [4] occurred at disk power-on lifetime: 1270 hours (52 days + 22 hours)
|
---|
178 | When the command that caused the error occurred, the device was active or idle.
|
---|
179 |
|
---|
180 | After command completion occurred, registers were:
|
---|
181 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
182 | -- -- -- == -- == == == -- -- -- -- --
|
---|
183 | 10 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: IDNF
|
---|
184 |
|
---|
185 | Commands leading to the command that caused the error were:
|
---|
186 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
187 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
188 | b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:00:22.170 SMART READ LOG
|
---|
189 | 20 00 00 00 01 00 00 00 00 00 00 40 40 00:00:22.170 READ SECTOR(S)
|
---|
190 | b0 00 d5 00 01 00 00 00 c2 4f 9a 00 00 00:00:22.160 SMART READ LOG
|
---|
191 | ec 00 00 00 01 00 00 00 00 00 00 40 40 00:00:22.160 IDENTIFY DEVICE
|
---|
192 | ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:21.610 IDENTIFY DEVICE
|
---|
193 |
|
---|
194 | Error 3464 [3] occurred at disk power-on lifetime: 1270 hours (52 days + 22 hours)
|
---|
195 | When the command that caused the error occurred, the device was active or idle.
|
---|
196 |
|
---|
197 | After command completion occurred, registers were:
|
---|
198 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
199 | -- -- -- == -- == == == -- -- -- -- --
|
---|
200 | 10 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: IDNF
|
---|
201 |
|
---|
202 | Commands leading to the command that caused the error were:
|
---|
203 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
204 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
205 | b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:00:24.620 SMART READ LOG
|
---|
206 | 20 00 00 00 01 00 00 00 00 00 00 40 40 00:00:24.610 READ SECTOR(S)
|
---|
207 | b0 00 d5 00 01 00 00 00 c2 4f 9a 00 00 00:00:24.610 SMART READ LOG
|
---|
208 | ec 00 00 00 01 00 00 00 00 00 00 40 40 00:00:24.610 IDENTIFY DEVICE
|
---|
209 | ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:24.060 IDENTIFY DEVICE
|
---|
210 |
|
---|
211 | Error 3463 [2] occurred at disk power-on lifetime: 1192 hours (49 days + 16 hours)
|
---|
212 | When the command that caused the error occurred, the device was active or idle.
|
---|
213 |
|
---|
214 | After command completion occurred, registers were:
|
---|
215 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
216 | -- -- -- == -- == == == -- -- -- -- --
|
---|
217 | 10 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: IDNF
|
---|
218 |
|
---|
219 | Commands leading to the command that caused the error were:
|
---|
220 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
221 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
222 | b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:00:19.030 SMART READ LOG
|
---|
223 | 20 00 00 00 01 00 00 00 00 00 00 40 40 00:00:19.030 READ SECTOR(S)
|
---|
224 | b0 00 d5 00 01 00 00 00 c2 4f 9a 00 00 00:00:19.030 SMART READ LOG
|
---|
225 | ec 00 00 00 01 00 00 00 00 00 00 40 40 00:00:19.030 IDENTIFY DEVICE
|
---|
226 | ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:18.480 IDENTIFY DEVICE
|
---|
227 |
|
---|
228 | Error 3462 [1] occurred at disk power-on lifetime: 1182 hours (49 days + 6 hours)
|
---|
229 | When the command that caused the error occurred, the device was active or idle.
|
---|
230 |
|
---|
231 | After command completion occurred, registers were:
|
---|
232 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
233 | -- -- -- == -- == == == -- -- -- -- --
|
---|
234 | 10 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: IDNF
|
---|
235 |
|
---|
236 | Commands leading to the command that caused the error were:
|
---|
237 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
238 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
239 | b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:00:26.640 SMART READ LOG
|
---|
240 | 20 00 00 00 01 00 00 00 00 00 00 40 40 00:00:26.640 READ SECTOR(S)
|
---|
241 | b0 00 d5 00 01 00 00 00 c2 4f 9a 00 00 00:00:26.640 SMART READ LOG
|
---|
242 | ec 00 00 00 01 00 00 00 00 00 00 40 40 00:00:26.640 IDENTIFY DEVICE
|
---|
243 | ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:26.080 IDENTIFY DEVICE
|
---|
244 |
|
---|
245 | Error 3461 [0] occurred at disk power-on lifetime: 1052 hours (43 days + 20 hours)
|
---|
246 | When the command that caused the error occurred, the device was active or idle.
|
---|
247 |
|
---|
248 | After command completion occurred, registers were:
|
---|
249 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
250 | -- -- -- == -- == == == -- -- -- -- --
|
---|
251 | 10 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: IDNF
|
---|
252 |
|
---|
253 | Commands leading to the command that caused the error were:
|
---|
254 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
255 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
256 | b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:00:18.710 SMART READ LOG
|
---|
257 | 20 00 00 00 01 00 00 00 00 00 00 40 40 00:00:18.710 READ SECTOR(S)
|
---|
258 | b0 00 d5 00 01 00 00 00 c2 4f 9a 00 00 00:00:18.710 SMART READ LOG
|
---|
259 | ec 00 00 00 01 00 00 00 00 00 00 40 40 00:00:18.700 IDENTIFY DEVICE
|
---|
260 | ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:17.590 IDENTIFY DEVICE
|
---|
261 |
|
---|
262 | SMART Extended Self-test Log Version: 1 (2 sectors)
|
---|
263 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
---|
264 | # 1 Short offline Completed without error 00% 1357 -
|
---|
265 | # 2 Short offline Completed without error 00% 1357 -
|
---|
266 | # 3 Short offline Completed without error 00% 1273 -
|
---|
267 | # 4 Short offline Completed without error 00% 1270 -
|
---|
268 | # 5 Short offline Completed without error 00% 1270 -
|
---|
269 | # 6 Short offline Completed without error 00% 1270 -
|
---|
270 | # 7 Short offline Completed without error 00% 1192 -
|
---|
271 | # 8 Short offline Completed without error 00% 1182 -
|
---|
272 | # 9 Short offline Completed without error 00% 1052 -
|
---|
273 | #10 Short offline Completed without error 00% 256 -
|
---|
274 | #11 Short offline Completed without error 00% 155 -
|
---|
275 | #12 Short offline Completed without error 00% 0 -
|
---|
276 |
|
---|
277 | Selective Self-tests/Logging not supported
|
---|
278 |
|
---|
279 | SCT Commands not supported
|
---|
280 |
|
---|
281 | Device Statistics (GP Log 0x04)
|
---|
282 | Page Offset Size Value Flags Description
|
---|
283 | 0x01 ===== = = === == General Statistics (empty) ==
|
---|
284 | 0x04 ===== = = === == General Errors Statistics (empty) ==
|
---|
285 | 0x05 ===== = = === == Temperature Statistics (empty) ==
|
---|
286 | 0x06 ===== = = === == Transport Statistics (empty) ==
|
---|
287 | 0x07 ===== = = === == Solid State Device Statistics (empty) ==
|
---|
288 | |||_ C monitored condition met
|
---|
289 | ||__ D supports DSN
|
---|
290 | |___ N normalized value
|
---|
291 |
|
---|
292 | SATA Phy Event Counters (GP Log 0x11)
|
---|
293 | ID Size Value Description
|
---|
294 | 0x0001 2 0 Command failed due to ICRC error
|
---|
295 | 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
|
---|
296 |
|
---|