1 | smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-31-generic] (local build) |
---|
2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org |
---|
3 | |
---|
4 | === START OF INFORMATION SECTION === |
---|
5 | Device Model: TOSHIBA-TR150 |
---|
6 | Serial Number: 46OB31K7K8ZU |
---|
7 | LU WWN Device Id: 5 e83a97 20045413b |
---|
8 | Firmware Version: SAFZ12.3 |
---|
9 | User Capacity: 960,197,124,096 bytes [960 GB] |
---|
10 | Sector Size: 512 bytes logical/physical |
---|
11 | Rotation Rate: Solid State Device |
---|
12 | Form Factor: 2.5 inches |
---|
13 | Device is: Not in smartctl database [for details use: -P showall] |
---|
14 | ATA Version is: ACS-2 (minor revision not indicated) |
---|
15 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) |
---|
16 | Local Time is: Wed Aug 3 13:58:37 2016 MSK |
---|
17 | SMART support is: Available - device has SMART capability. |
---|
18 | SMART support is: Enabled |
---|
19 | AAM feature is: Unavailable |
---|
20 | APM level is: 254 (maximum performance) |
---|
21 | Rd look-ahead is: Enabled |
---|
22 | Write cache is: Enabled |
---|
23 | ATA Security is: Disabled, frozen [SEC2] |
---|
24 | Wt Cache Reorder: Unavailable |
---|
25 | |
---|
26 | === START OF READ SMART DATA SECTION === |
---|
27 | SMART overall-health self-assessment test result: PASSED |
---|
28 | |
---|
29 | General SMART Values: |
---|
30 | Offline data collection status: (0x00) Offline data collection activity |
---|
31 | was never started. |
---|
32 | Auto Offline Data Collection: Disabled. |
---|
33 | Self-test execution status: ( 0) The previous self-test routine completed |
---|
34 | without error or no self-test has ever |
---|
35 | been run. |
---|
36 | Total time to complete Offline |
---|
37 | data collection: ( 30) seconds. |
---|
38 | Offline data collection |
---|
39 | capabilities: (0x79) SMART execute Offline immediate. |
---|
40 | No Auto Offline data collection support. |
---|
41 | Suspend Offline collection upon new |
---|
42 | command. |
---|
43 | Offline surface scan supported. |
---|
44 | Self-test supported. |
---|
45 | Conveyance Self-test supported. |
---|
46 | Selective Self-test supported. |
---|
47 | SMART capabilities: (0x0003) Saves SMART data before entering |
---|
48 | power-saving mode. |
---|
49 | Supports SMART auto save timer. |
---|
50 | Error logging capability: (0x01) Error logging supported. |
---|
51 | General Purpose Logging supported. |
---|
52 | Short self-test routine |
---|
53 | recommended polling time: ( 1) minutes. |
---|
54 | Extended self-test routine |
---|
55 | recommended polling time: ( 2) minutes. |
---|
56 | Conveyance self-test routine |
---|
57 | recommended polling time: ( 3) minutes. |
---|
58 | |
---|
59 | SMART Attributes Data Structure revision number: 16 |
---|
60 | Vendor Specific SMART Attributes with Thresholds: |
---|
61 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE |
---|
62 | 9 Power_On_Hours -O--C- 100 100 000 - 119 |
---|
63 | 12 Power_Cycle_Count -O--C- 100 100 000 - 8 |
---|
64 | 167 Unknown_Attribute -O---K 100 100 000 - 0 |
---|
65 | 168 Unknown_Attribute -O--C- 100 100 000 - 0 |
---|
66 | 169 Unknown_Attribute PO---- 100 100 010 - 0 |
---|
67 | 173 Unknown_Attribute -O--C- 200 200 000 - 0 |
---|
68 | 192 Power-Off_Retract_Count -O--C- 100 100 000 - 7 |
---|
69 | 194 Temperature_Celsius PO---K 072 056 020 - 28 (Min/Max 25/44) |
---|
70 | 241 Total_LBAs_Written -O--CK 100 100 000 - 13785 |
---|
71 | ||||||_ K auto-keep |
---|
72 | |||||__ C event count |
---|
73 | ||||___ R error rate |
---|
74 | |||____ S speed/performance |
---|
75 | ||_____ O updated online |
---|
76 | |______ P prefailure warning |
---|
77 | |
---|
78 | General Purpose Log Directory Version 1 |
---|
79 | SMART Log Directory Version 1 [multi-sector log support] |
---|
80 | Address Access R/W Size Description |
---|
81 | 0x00 GPL,SL R/O 1 Log Directory |
---|
82 | 0x01 SL R/O 1 Summary SMART error log |
---|
83 | 0x02 SL R/O 51 Comprehensive SMART error log |
---|
84 | 0x03 GPL R/O 64 Ext. Comprehensive SMART error log |
---|
85 | 0x04 GPL,SL R/O 8 Device Statistics log |
---|
86 | 0x06 SL R/O 1 SMART self-test log |
---|
87 | 0x07 GPL R/O 1 Extended self-test log |
---|
88 | 0x09 SL R/W 1 Selective self-test log |
---|
89 | 0x10 GPL R/O 1 SATA NCQ Queued Error log |
---|
90 | 0x11 GPL R/O 1 SATA Phy Event Counters log |
---|
91 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log |
---|
92 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log |
---|
93 | 0xe0 GPL,SL R/W 1 SCT Command/Status |
---|
94 | 0xe1 GPL,SL R/W 1 SCT Data Transfer |
---|
95 | |
---|
96 | SMART Extended Comprehensive Error Log Version: 1 (64 sectors) |
---|
97 | No Errors Logged |
---|
98 | |
---|
99 | SMART Extended Self-test Log Version: 1 (1 sectors) |
---|
100 | No self-tests have been logged. [To run self-tests, use: smartctl -t] |
---|
101 | |
---|
102 | SMART Selective self-test log data structure revision number 1 |
---|
103 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
---|
104 | 1 0 0 Not_testing |
---|
105 | 2 0 0 Not_testing |
---|
106 | 3 0 0 Not_testing |
---|
107 | 4 0 0 Not_testing |
---|
108 | 5 0 0 Not_testing |
---|
109 | Selective self-test flags (0x0): |
---|
110 | After scanning selected spans, do NOT read-scan remainder of disk. |
---|
111 | If Selective self-test is pending on power-up, resume after 0 minute delay. |
---|
112 | |
---|
113 | SCT Commands not supported |
---|
114 | |
---|
115 | Device Statistics (GP Log 0x04) |
---|
116 | Page Offset Size Value Flags Description |
---|
117 | 0x01 ===== = = === == General Statistics (rev 2) == |
---|
118 | 0x01 0x008 4 8 --- Lifetime Power-On Resets |
---|
119 | 0x01 0x010 4 119 --- Power-on Hours |
---|
120 | 0x01 0x018 6 903421672 --- Logical Sectors Written |
---|
121 | 0x01 0x020 6 1261819 --- Number of Write Commands |
---|
122 | 0x01 0x028 6 310615922 --- Logical Sectors Read |
---|
123 | 0x01 0x030 6 5354116 --- Number of Read Commands |
---|
124 | 0x04 ===== = = === == General Errors Statistics (rev 1) == |
---|
125 | 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors |
---|
126 | 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion |
---|
127 | 0x05 ===== = = === == Temperature Statistics (rev 1) == |
---|
128 | 0x05 0x008 1 32 --- Current Temperature |
---|
129 | 0x05 0x010 1 32 --- Average Short Term Temperature |
---|
130 | 0x05 0x018 1 32 --- Average Long Term Temperature |
---|
131 | 0x05 0x020 1 50 --- Highest Temperature |
---|
132 | 0x05 0x028 1 5 --- Lowest Temperature |
---|
133 | 0x05 0x030 1 50 --- Highest Average Short Term Temperature |
---|
134 | 0x05 0x038 1 16 --- Lowest Average Short Term Temperature |
---|
135 | 0x05 0x040 1 50 --- Highest Average Long Term Temperature |
---|
136 | 0x05 0x048 1 16 --- Lowest Average Long Term Temperature |
---|
137 | 0x05 0x050 4 0 --- Time in Over-Temperature |
---|
138 | 0x05 0x058 1 50 --- Specified Maximum Operating Temperature |
---|
139 | 0x05 0x060 4 0 --- Time in Under-Temperature |
---|
140 | 0x05 0x068 1 5 --- Specified Minimum Operating Temperature |
---|
141 | 0x06 ===== = = === == Transport Statistics (rev 1) == |
---|
142 | 0x06 0x008 4 7 --- Number of Hardware Resets |
---|
143 | 0x06 0x018 4 0 --- Number of Interface CRC Errors |
---|
144 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) == |
---|
145 | 0x07 0x008 1 0 --- Percentage Used Endurance Indicator |
---|
146 | |||_ C monitored condition met |
---|
147 | ||__ D supports DSN |
---|
148 | |___ N normalized value |
---|
149 | |
---|
150 | SATA Phy Event Counters (GP Log 0x11) |
---|
151 | ID Size Value Description |
---|
152 | 0x0001 2 0 Command failed due to ICRC error |
---|
153 | 0x0003 2 0 R_ERR response for device-to-host data FIS |
---|
154 | 0x0004 2 0 R_ERR response for host-to-device data FIS |
---|
155 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS |
---|
156 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS |
---|
157 | 0x0008 2 0 Device-to-host non-data FIS retries |
---|
158 | 0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy |
---|
159 | 0x000a 4 2 Device-to-host register FISes sent due to a COMRESET |
---|
160 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC |
---|
161 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC |
---|
162 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC |
---|
163 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC |
---|
164 | |
---|