| 1 | ################################################################################# |
|---|
| 2 | # hwinfo --disk |
|---|
| 3 | 47: IDE 00.0: 10600 Disk |
|---|
| 4 | [Created at block.243] |
|---|
| 5 | UDI: /org/freedesktop/Hal/devices/storage_serial_TOSHIBA_THNSNJ512GCST_Y3FSHIMOMNULL |
|---|
| 6 | Unique ID: 3OxL.zfxCMx4fxg5 |
|---|
| 7 | Parent ID: x7x8.45KnxGrxJ9x |
|---|
| 8 | SysFS ID: /class/block/sda |
|---|
| 9 | SysFS BusID: 0:0:0:0 |
|---|
| 10 | SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata1/host0/target0:0:0/0:0:0:0 |
|---|
| 11 | Hardware Class: disk |
|---|
| 12 | Model: "TOSHIBA THNSNJ51" |
|---|
| 13 | Vendor: "TOSHIBA" |
|---|
| 14 | Device: "THNSNJ51" |
|---|
| 15 | Revision: "JTRA" |
|---|
| 16 | Serial ID: "Y3FSHIMOMNULL" |
|---|
| 17 | Driver: "ahci", "sd" |
|---|
| 18 | Driver Modules: "ahci" |
|---|
| 19 | Device File: /dev/sda |
|---|
| 20 | Device Files: /dev/sda, /dev/disk/by-id/ata-TOSHIBA_THNSNJ512GCST_Y3FSHIMOMNULL, /dev/disk/by-id/scsi-SATA_TOSHIBA_THNSNJ5_Y3FSHIMOMNULL, /dev/disk/by-id/wwn-0x500080diskydisk, /dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0 |
|---|
| 21 | Device Number: block 8:0-8:15 |
|---|
| 22 | BIOS id: 0x80 |
|---|
| 23 | Geometry (Logical): CHS 62260/255/63 |
|---|
| 24 | Size: 1000215216 sectors a 512 bytes |
|---|
| 25 | Config Status: cfg=new, avail=yes, need=no, active=unknown |
|---|
| 26 | Attached to: #22 (SATA controller) |
|---|
| 27 | |
|---|
| 28 | |
|---|
| 29 | ################################################################################# |
|---|
| 30 | # hwinfo --storage-ctrl |
|---|
| 31 | 29: PCI 1f.2: 0106 SATA controller (AHCI 1.0) |
|---|
| 32 | [Created at pci.318] |
|---|
| 33 | UDI: /org/freedesktop/Hal/devices/pci_8086_3b2f |
|---|
| 34 | Unique ID: x7x8.45KnxGrxJ9x |
|---|
| 35 | SysFS ID: /devices/pci0000:00/0000:00:1f.2 |
|---|
| 36 | SysFS BusID: 0000:00:1f.2 |
|---|
| 37 | Hardware Class: storage |
|---|
| 38 | Model: "Intel Ibex Peak 6 port SATA AHCI Controller" |
|---|
| 39 | Vendor: pci 0x8086 "Intel Corporation" |
|---|
| 40 | Device: pci 0x3b2f "Ibex Peak 6 port SATA AHCI Controller" |
|---|
| 41 | SubVendor: pci 0x17aa "Lenovo" |
|---|
| 42 | SubDevice: pci 0x2168 |
|---|
| 43 | Revision: 0x06 |
|---|
| 44 | Driver: "ahci" |
|---|
| 45 | Driver Modules: "ahci" |
|---|
| 46 | I/O Ports: 0x1818-0x181f (rw) |
|---|
| 47 | I/O Ports: 0x180c-0x180f (rw) |
|---|
| 48 | I/O Ports: 0x1810-0x1817 (rw) |
|---|
| 49 | I/O Ports: 0x1808-0x180b (rw) |
|---|
| 50 | I/O Ports: 0x1840-0x185f (rw) |
|---|
| 51 | Memory Range: 0xf2627000-0xf26277ff (rw,non-prefetchable) |
|---|
| 52 | IRQ: 53 (939404 events) |
|---|
| 53 | Module Alias: "pci:v00008086d00003B2Fsv000017AAsd00002168bc01sc06i01" |
|---|
| 54 | Driver Info #0: |
|---|
| 55 | Driver Status: ahci is active |
|---|
| 56 | Driver Activation Cmd: "modprobe ahci" |
|---|
| 57 | Config Status: cfg=new, avail=yes, need=no, active=unknown |
|---|
| 58 | |
|---|
| 59 | |
|---|
| 60 | |
|---|
| 61 | |
|---|
| 62 | ################################################################################# |
|---|
| 63 | # smartctl -q noserial -x /dev/sda | tee /tmp/smartctl-TOSHIBA-THNSNJ512GCST.txt |
|---|
| 64 | |
|---|
| 65 | smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.13.0-92-generic] (local build) |
|---|
| 66 | Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net |
|---|
| 67 | |
|---|
| 68 | === START OF INFORMATION SECTION === |
|---|
| 69 | Device Model: TOSHIBA THNSNJ512GCST |
|---|
| 70 | Firmware Version: JTRA0102 |
|---|
| 71 | User Capacity: 512,110,190,592 bytes [512 GB] |
|---|
| 72 | Sector Size: 512 bytes logical/physical |
|---|
| 73 | Device is: Not in smartctl database [for details use: -P showall] |
|---|
| 74 | ATA Version is: 9 |
|---|
| 75 | ATA Standard is: Exact ATA specification draft version not indicated |
|---|
| 76 | Local Time is: Tue Aug 2 13:59:16 2016 EDT |
|---|
| 77 | SMART support is: Available - device has SMART capability. |
|---|
| 78 | SMART support is: Enabled |
|---|
| 79 | |
|---|
| 80 | === START OF READ SMART DATA SECTION === |
|---|
| 81 | SMART overall-health self-assessment test result: PASSED |
|---|
| 82 | |
|---|
| 83 | General SMART Values: |
|---|
| 84 | Offline data collection status: (0x02) Offline data collection activity |
|---|
| 85 | was completed without error. |
|---|
| 86 | Auto Offline Data Collection: Disabled. |
|---|
| 87 | Self-test execution status: ( 0) The previous self-test routine completed |
|---|
| 88 | without error or no self-test has ever |
|---|
| 89 | been run. |
|---|
| 90 | Total time to complete Offline |
|---|
| 91 | data collection: ( 120) seconds. |
|---|
| 92 | Offline data collection |
|---|
| 93 | capabilities: (0x5b) SMART execute Offline immediate. |
|---|
| 94 | Auto Offline data collection on/off support. |
|---|
| 95 | Suspend Offline collection upon new |
|---|
| 96 | command. |
|---|
| 97 | Offline surface scan supported. |
|---|
| 98 | Self-test supported. |
|---|
| 99 | No Conveyance Self-test supported. |
|---|
| 100 | Selective Self-test supported. |
|---|
| 101 | SMART capabilities: (0x0003) Saves SMART data before entering |
|---|
| 102 | power-saving mode. |
|---|
| 103 | Supports SMART auto save timer. |
|---|
| 104 | Error logging capability: (0x01) Error logging supported. |
|---|
| 105 | General Purpose Logging supported. |
|---|
| 106 | Short self-test routine |
|---|
| 107 | recommended polling time: ( 2) minutes. |
|---|
| 108 | Extended self-test routine |
|---|
| 109 | recommended polling time: ( 19) minutes. |
|---|
| 110 | SCT capabilities: (0x003d) SCT Status supported. |
|---|
| 111 | SCT Error Recovery Control supported. |
|---|
| 112 | SCT Feature Control supported. |
|---|
| 113 | SCT Data Table supported. |
|---|
| 114 | |
|---|
| 115 | SMART Attributes Data Structure revision number: 16 |
|---|
| 116 | Vendor Specific SMART Attributes with Thresholds: |
|---|
| 117 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE |
|---|
| 118 | 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 |
|---|
| 119 | 2 Throughput_Performance P-S--- 100 100 050 - 0 |
|---|
| 120 | 3 Spin_Up_Time POS--- 100 100 050 - 0 |
|---|
| 121 | 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 |
|---|
| 122 | 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 |
|---|
| 123 | 8 Seek_Time_Performance P-S--- 100 100 050 - 0 |
|---|
| 124 | 9 Power_On_Hours -O--C- 100 100 000 - 16925 |
|---|
| 125 | 10 Spin_Retry_Count PO--C- 100 100 050 - 0 |
|---|
| 126 | 12 Power_Cycle_Count -O--C- 100 100 000 - 662 |
|---|
| 127 | 167 Unknown_Attribute -O---K 100 100 000 - 0 |
|---|
| 128 | 168 Unknown_Attribute -O--C- 100 100 000 - 213 |
|---|
| 129 | 169 Unknown_Attribute PO--C- 100 100 010 - 100 |
|---|
| 130 | 173 Unknown_Attribute -O--C- 190 190 000 - 0 |
|---|
| 131 | 175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 |
|---|
| 132 | 192 Power-Off_Retract_Count -O--C- 100 100 000 - 271 |
|---|
| 133 | 194 Temperature_Celsius PO---K 066 046 020 - 34 (Min/Max 12/54) |
|---|
| 134 | 197 Current_Pending_Sector -O--C- 100 100 000 - 0 |
|---|
| 135 | 240 Head_Flying_Hours PO--C- 100 100 050 - 0 |
|---|
| 136 | ||||||_ K auto-keep |
|---|
| 137 | |||||__ C event count |
|---|
| 138 | ||||___ R error rate |
|---|
| 139 | |||____ S speed/performance |
|---|
| 140 | ||_____ O updated online |
|---|
| 141 | |______ P prefailure warning |
|---|
| 142 | |
|---|
| 143 | General Purpose Log Directory Version 1 |
|---|
| 144 | SMART Log Directory Version 1 [multi-sector log support] |
|---|
| 145 | GP/S Log at address 0x00 has 1 sectors [Log Directory] |
|---|
| 146 | SMART Log at address 0x01 has 1 sectors [Summary SMART error log] |
|---|
| 147 | SMART Log at address 0x02 has 51 sectors [Comprehensive SMART error log] |
|---|
| 148 | GP Log at address 0x03 has 64 sectors [Ext. Comprehensive SMART error log] |
|---|
| 149 | GP/S Log at address 0x04 has 8 sectors [Device Statistics] |
|---|
| 150 | SMART Log at address 0x06 has 1 sectors [SMART self-test log] |
|---|
| 151 | GP Log at address 0x07 has 1 sectors [Extended self-test log] |
|---|
| 152 | SMART Log at address 0x09 has 1 sectors [Selective self-test log] |
|---|
| 153 | GP Log at address 0x10 has 1 sectors [NCQ Command Error] |
|---|
| 154 | GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] |
|---|
| 155 | GP/S Log at address 0x30 has 9 sectors [Reserved] |
|---|
| 156 | GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] |
|---|
| 157 | GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] |
|---|
| 158 | GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] |
|---|
| 159 | GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] |
|---|
| 160 | GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] |
|---|
| 161 | GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] |
|---|
| 162 | GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] |
|---|
| 163 | GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] |
|---|
| 164 | GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] |
|---|
| 165 | GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] |
|---|
| 166 | GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] |
|---|
| 167 | GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] |
|---|
| 168 | GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] |
|---|
| 169 | GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] |
|---|
| 170 | GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] |
|---|
| 171 | GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] |
|---|
| 172 | GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] |
|---|
| 173 | GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] |
|---|
| 174 | GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] |
|---|
| 175 | GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] |
|---|
| 176 | GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] |
|---|
| 177 | GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] |
|---|
| 178 | GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] |
|---|
| 179 | GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] |
|---|
| 180 | GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] |
|---|
| 181 | GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] |
|---|
| 182 | GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] |
|---|
| 183 | GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] |
|---|
| 184 | GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] |
|---|
| 185 | GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] |
|---|
| 186 | GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] |
|---|
| 187 | GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] |
|---|
| 188 | GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] |
|---|
| 189 | GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] |
|---|
| 190 | |
|---|
| 191 | SMART Extended Comprehensive Error Log Version: 1 (64 sectors) |
|---|
| 192 | Device Error Count: 213 |
|---|
| 193 | CR = Command Register |
|---|
| 194 | FEATR = Features Register |
|---|
| 195 | COUNT = Count (was: Sector Count) Register |
|---|
| 196 | LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 |
|---|
| 197 | LH = LBA High (was: Cylinder High) Register ] LBA |
|---|
| 198 | LM = LBA Mid (was: Cylinder Low) Register ] Register |
|---|
| 199 | LL = LBA Low (was: Sector Number) Register ] |
|---|
| 200 | DV = Device (was: Device/Head) Register |
|---|
| 201 | DC = Device Control Register |
|---|
| 202 | ER = Error register |
|---|
| 203 | ST = Status register |
|---|
| 204 | Powered_Up_Time is measured from power on, and printed as |
|---|
| 205 | DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, |
|---|
| 206 | SS=sec, and sss=millisec. It "wraps" after 49.710 days. |
|---|
| 207 | |
|---|
| 208 | Error 213 [212] occurred at disk power-on lifetime: 119 hours (4 days + 23 hours) |
|---|
| 209 | When the command that caused the error occurred, the device was active or idle. |
|---|
| 210 | |
|---|
| 211 | After command completion occurred, registers were: |
|---|
| 212 | ER -- ST COUNT LBA_48 LH LM LL DV DC |
|---|
| 213 | -- -- -- == -- == == == -- -- -- -- -- |
|---|
| 214 | 84 -- 51 01 00 00 00 1a 8e c4 72 e0 08 Error: ICRC, ABRT 256 sectors at LBA = 0x1a8ec472 = 445564018 |
|---|
| 215 | |
|---|
| 216 | Commands leading to the command that caused the error were: |
|---|
| 217 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name |
|---|
| 218 | -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- |
|---|
| 219 | 25 00 00 01 00 00 00 1a 8e c4 72 e0 08 05:36:23.874 READ DMA EXT |
|---|
| 220 | 25 00 00 01 00 00 00 1a 8e c3 72 e0 08 05:36:23.873 READ DMA EXT |
|---|
| 221 | 25 00 00 01 00 00 00 1a 8e c2 72 e0 08 05:36:23.872 READ DMA EXT |
|---|
| 222 | 25 00 00 01 00 00 00 1a 8e c1 72 e0 08 05:36:23.872 READ DMA EXT |
|---|
| 223 | 25 00 00 01 00 00 00 1a 8e c0 72 e0 08 05:36:23.871 READ DMA EXT |
|---|
| 224 | |
|---|
| 225 | Error 212 [211] occurred at disk power-on lifetime: 119 hours (4 days + 23 hours) |
|---|
| 226 | When the command that caused the error occurred, the device was active or idle. |
|---|
| 227 | |
|---|
| 228 | After command completion occurred, registers were: |
|---|
| 229 | ER -- ST COUNT LBA_48 LH LM LL DV DC |
|---|
| 230 | -- -- -- == -- == == == -- -- -- -- -- |
|---|
| 231 | 84 -- 51 01 00 00 00 1a 54 ee 72 e0 08 Error: ICRC, ABRT 256 sectors at LBA = 0x1a54ee72 = 441773682 |
|---|
| 232 | |
|---|
| 233 | Commands leading to the command that caused the error were: |
|---|
| 234 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name |
|---|
| 235 | -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- |
|---|
| 236 | 25 00 00 01 00 00 00 1a 54 ee 72 e0 08 05:36:00.537 READ DMA EXT |
|---|
| 237 | 25 00 00 01 00 00 00 1a 54 ed 72 e0 08 05:36:00.537 READ DMA EXT |
|---|
| 238 | 25 00 00 01 00 00 00 1a 54 ec 72 e0 08 05:36:00.536 READ DMA EXT |
|---|
| 239 | 25 00 00 01 00 00 00 1a 54 eb 72 e0 08 05:36:00.536 READ DMA EXT |
|---|
| 240 | 25 00 00 01 00 00 00 1a 54 ea 72 e0 08 05:36:00.535 READ DMA EXT |
|---|
| 241 | |
|---|
| 242 | Error 211 [210] occurred at disk power-on lifetime: 119 hours (4 days + 23 hours) |
|---|
| 243 | When the command that caused the error occurred, the device was active or idle. |
|---|
| 244 | |
|---|
| 245 | After command completion occurred, registers were: |
|---|
| 246 | ER -- ST COUNT LBA_48 LH LM LL DV DC |
|---|
| 247 | -- -- -- == -- == == == -- -- -- -- -- |
|---|
| 248 | 84 -- 51 01 00 00 00 19 4d 73 72 e0 08 Error: ICRC, ABRT 256 sectors at LBA = 0x194d7372 = 424506226 |
|---|
| 249 | |
|---|
| 250 | Commands leading to the command that caused the error were: |
|---|
| 251 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name |
|---|
| 252 | -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- |
|---|
| 253 | 25 00 00 01 00 00 00 19 4d 73 72 e0 08 05:34:33.697 READ DMA EXT |
|---|
| 254 | 25 00 00 01 00 00 00 19 4d 72 72 e0 08 05:34:33.696 READ DMA EXT |
|---|
| 255 | 25 00 00 01 00 00 00 19 4d 71 72 e0 08 05:34:33.696 READ DMA EXT |
|---|
| 256 | 25 00 00 01 00 00 00 19 4d 70 72 e0 08 05:34:33.695 READ DMA EXT |
|---|
| 257 | 25 00 00 01 00 00 00 19 4d 6f 72 e0 08 05:34:33.694 READ DMA EXT |
|---|
| 258 | |
|---|
| 259 | Error 210 [209] occurred at disk power-on lifetime: 119 hours (4 days + 23 hours) |
|---|
| 260 | When the command that caused the error occurred, the device was active or idle. |
|---|
| 261 | |
|---|
| 262 | After command completion occurred, registers were: |
|---|
| 263 | ER -- ST COUNT LBA_48 LH LM LL DV DC |
|---|
| 264 | -- -- -- == -- == == == -- -- -- -- -- |
|---|
| 265 | 84 -- 51 02 00 00 00 19 29 ee 72 e0 08 Error: ICRC, ABRT 512 sectors at LBA = 0x1929ee72 = 422178418 |
|---|
| 266 | |
|---|
| 267 | Commands leading to the command that caused the error were: |
|---|
| 268 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name |
|---|
| 269 | -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- |
|---|
| 270 | 25 00 00 02 00 00 00 19 29 ee 72 e0 08 05:15:58.020 READ DMA EXT |
|---|
| 271 | 35 00 00 04 00 00 00 1b 6f 86 f2 e0 08 05:15:58.018 WRITE DMA EXT |
|---|
| 272 | 35 00 00 04 00 00 00 1b 6f 82 f2 e0 08 05:15:58.015 WRITE DMA EXT |
|---|
| 273 | 35 00 00 04 00 00 00 1b 6f 7e f2 e0 08 05:15:58.013 WRITE DMA EXT |
|---|
| 274 | 35 00 00 04 00 00 00 1b 6f 7a f2 e0 08 05:15:58.011 WRITE DMA EXT |
|---|
| 275 | |
|---|
| 276 | Error 209 [208] occurred at disk power-on lifetime: 118 hours (4 days + 22 hours) |
|---|
| 277 | When the command that caused the error occurred, the device was active or idle. |
|---|
| 278 | |
|---|
| 279 | After command completion occurred, registers were: |
|---|
| 280 | ER -- ST COUNT LBA_48 LH LM LL DV DC |
|---|
| 281 | -- -- -- == -- == == == -- -- -- -- -- |
|---|
| 282 | 84 -- 51 01 00 00 00 27 03 3b 80 e0 08 Error: ICRC, ABRT 256 sectors at LBA = 0x27033b80 = 654523264 |
|---|
| 283 | |
|---|
| 284 | Commands leading to the command that caused the error were: |
|---|
| 285 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name |
|---|
| 286 | -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- |
|---|
| 287 | 25 00 00 01 00 00 00 27 03 3b 80 e0 08 04:40:17.891 READ DMA EXT |
|---|
| 288 | 25 00 00 01 00 00 00 27 03 3a 80 e0 08 04:40:17.890 READ DMA EXT |
|---|
| 289 | 25 00 00 01 00 00 00 27 03 39 80 e0 08 04:40:17.889 READ DMA EXT |
|---|
| 290 | 25 00 00 01 00 00 00 27 03 38 80 e0 08 04:40:17.888 READ DMA EXT |
|---|
| 291 | 25 00 00 01 00 00 00 27 03 37 80 e0 08 04:40:17.887 READ DMA EXT |
|---|
| 292 | |
|---|
| 293 | Error 208 [207] occurred at disk power-on lifetime: 118 hours (4 days + 22 hours) |
|---|
| 294 | When the command that caused the error occurred, the device was active or idle. |
|---|
| 295 | |
|---|
| 296 | After command completion occurred, registers were: |
|---|
| 297 | ER -- ST COUNT LBA_48 LH LM LL DV DC |
|---|
| 298 | -- -- -- == -- == == == -- -- -- -- -- |
|---|
| 299 | 84 -- 51 01 00 00 00 26 ca 74 80 e0 08 Error: ICRC, ABRT 256 sectors at LBA = 0x26ca7480 = 650802304 |
|---|
| 300 | |
|---|
| 301 | Commands leading to the command that caused the error were: |
|---|
| 302 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name |
|---|
| 303 | -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- |
|---|
| 304 | 25 00 00 01 00 00 00 26 ca 74 80 e0 08 04:38:51.810 READ DMA EXT |
|---|
| 305 | 25 00 00 01 00 00 00 26 ca 73 80 e0 08 04:38:51.809 READ DMA EXT |
|---|
| 306 | 25 00 00 01 00 00 00 26 ca 72 80 e0 08 04:38:51.808 READ DMA EXT |
|---|
| 307 | 25 00 00 01 00 00 00 26 ca 71 80 e0 08 04:38:51.807 READ DMA EXT |
|---|
| 308 | 25 00 00 01 00 00 00 26 ca 70 80 e0 08 04:38:51.806 READ DMA EXT |
|---|
| 309 | |
|---|
| 310 | Error 207 [206] occurred at disk power-on lifetime: 118 hours (4 days + 22 hours) |
|---|
| 311 | When the command that caused the error occurred, the device was active or idle. |
|---|
| 312 | |
|---|
| 313 | After command completion occurred, registers were: |
|---|
| 314 | ER -- ST COUNT LBA_48 LH LM LL DV DC |
|---|
| 315 | -- -- -- == -- == == == -- -- -- -- -- |
|---|
| 316 | 84 -- 51 01 00 00 00 26 4a 84 80 e0 08 Error: ICRC, ABRT 256 sectors at LBA = 0x264a8480 = 642417792 |
|---|
| 317 | |
|---|
| 318 | Commands leading to the command that caused the error were: |
|---|
| 319 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name |
|---|
| 320 | -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- |
|---|
| 321 | 25 00 00 01 00 00 00 26 4a 84 80 e0 08 04:38:19.936 READ DMA EXT |
|---|
| 322 | 25 00 00 01 00 00 00 26 4a 83 80 e0 08 04:38:19.935 READ DMA EXT |
|---|
| 323 | 25 00 00 01 00 00 00 26 4a 82 80 e0 08 04:38:19.934 READ DMA EXT |
|---|
| 324 | 25 00 00 01 00 00 00 26 4a 81 80 e0 08 04:38:19.933 READ DMA EXT |
|---|
| 325 | 25 00 00 01 00 00 00 26 4a 80 80 e0 08 04:38:19.932 READ DMA EXT |
|---|
| 326 | |
|---|
| 327 | Error 206 [205] occurred at disk power-on lifetime: 118 hours (4 days + 22 hours) |
|---|
| 328 | When the command that caused the error occurred, the device was active or idle. |
|---|
| 329 | |
|---|
| 330 | After command completion occurred, registers were: |
|---|
| 331 | ER -- ST COUNT LBA_48 LH LM LL DV DC |
|---|
| 332 | -- -- -- == -- == == == -- -- -- -- -- |
|---|
| 333 | 84 -- 51 01 00 00 00 25 cb b7 00 e0 08 Error: ICRC, ABRT 256 sectors at LBA = 0x25cbb700 = 634107648 |
|---|
| 334 | |
|---|
| 335 | Commands leading to the command that caused the error were: |
|---|
| 336 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name |
|---|
| 337 | -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- |
|---|
| 338 | 25 00 00 01 00 00 00 25 cb b7 00 e0 08 04:22:30.355 READ DMA EXT |
|---|
| 339 | 25 00 00 01 00 00 00 25 cb b6 00 e0 08 04:22:30.348 READ DMA EXT |
|---|
| 340 | 25 00 00 01 00 00 00 25 cb b5 00 e0 08 04:22:30.340 READ DMA EXT |
|---|
| 341 | 25 00 00 01 00 00 00 25 cb b4 00 e0 08 04:22:30.332 READ DMA EXT |
|---|
| 342 | 25 00 00 01 00 00 00 25 cb b3 00 e0 08 04:22:30.325 READ DMA EXT |
|---|
| 343 | |
|---|
| 344 | SMART Extended Self-test Log Version: 1 (1 sectors) |
|---|
| 345 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error |
|---|
| 346 | # 1 Short offline Completed without error 00% 16925 - |
|---|
| 347 | # 2 Short offline Completed without error 00% 855 - |
|---|
| 348 | |
|---|
| 349 | SMART Selective self-test log data structure revision number 1 |
|---|
| 350 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
|---|
| 351 | 1 0 0 Not_testing |
|---|
| 352 | 2 0 0 Not_testing |
|---|
| 353 | 3 0 0 Not_testing |
|---|
| 354 | 4 0 0 Not_testing |
|---|
| 355 | 5 0 0 Not_testing |
|---|
| 356 | Selective self-test flags (0x0): |
|---|
| 357 | After scanning selected spans, do NOT read-scan remainder of disk. |
|---|
| 358 | If Selective self-test is pending on power-up, resume after 0 minute delay. |
|---|
| 359 | |
|---|
| 360 | SCT Status Version: 3 |
|---|
| 361 | SCT Version (vendor specific): 3 (0x0003) |
|---|
| 362 | SCT Support Level: 0 |
|---|
| 363 | Device State: Active (0) |
|---|
| 364 | Current Temperature: 34 Celsius |
|---|
| 365 | Power Cycle Min/Max Temperature: 27/39 Celsius |
|---|
| 366 | Lifetime Min/Max Temperature: 12/54 Celsius |
|---|
| 367 | Under/Over Temperature Limit Count: 0/0 |
|---|
| 368 | SCT Temperature History Version: 2 |
|---|
| 369 | Temperature Sampling Period: 1 minute |
|---|
| 370 | Temperature Logging Interval: 1 minute |
|---|
| 371 | Min/Max recommended Temperature: 5/40 Celsius |
|---|
| 372 | Min/Max Temperature Limit: 0/80 Celsius |
|---|
| 373 | Temperature History Size (Index): 128 (100) |
|---|
| 374 | |
|---|
| 375 | Index Estimated Time Temperature Celsius |
|---|
| 376 | 101 2016-08-02 11:52 39 ******************** |
|---|
| 377 | 102 2016-08-02 11:53 38 ******************* |
|---|
| 378 | 103 2016-08-02 11:54 37 ****************** |
|---|
| 379 | 104 2016-08-02 11:55 37 ****************** |
|---|
| 380 | 105 2016-08-02 11:56 36 ***************** |
|---|
| 381 | 106 2016-08-02 11:57 36 ***************** |
|---|
| 382 | 107 2016-08-02 11:58 35 **************** |
|---|
| 383 | ... ..( 2 skipped). .. **************** |
|---|
| 384 | 110 2016-08-02 12:01 35 **************** |
|---|
| 385 | 111 2016-08-02 12:02 34 *************** |
|---|
| 386 | ... ..( 7 skipped). .. *************** |
|---|
| 387 | 119 2016-08-02 12:10 34 *************** |
|---|
| 388 | 120 2016-08-02 12:11 33 ************** |
|---|
| 389 | ... ..( 98 skipped). .. ************** |
|---|
| 390 | 91 2016-08-02 13:50 33 ************** |
|---|
| 391 | 92 2016-08-02 13:51 35 **************** |
|---|
| 392 | 93 2016-08-02 13:52 37 ****************** |
|---|
| 393 | 94 2016-08-02 13:53 36 ***************** |
|---|
| 394 | 95 2016-08-02 13:54 35 **************** |
|---|
| 395 | 96 2016-08-02 13:55 35 **************** |
|---|
| 396 | 97 2016-08-02 13:56 34 *************** |
|---|
| 397 | ... ..( 2 skipped). .. *************** |
|---|
| 398 | 100 2016-08-02 13:59 34 *************** |
|---|
| 399 | |
|---|
| 400 | SCT Error Recovery Control: |
|---|
| 401 | Read: 600 (60.0 seconds) |
|---|
| 402 | Write: 600 (60.0 seconds) |
|---|
| 403 | |
|---|
| 404 | SATA Phy Event Counters (GP Log 0x11) |
|---|
| 405 | ID Size Value Description |
|---|
| 406 | 0x0001 2 0 Command failed due to ICRC error |
|---|
| 407 | 0x0002 4 0 R_ERR response for data FIS |
|---|
| 408 | 0x0003 2 0 R_ERR response for device-to-host data FIS |
|---|
| 409 | 0x0004 2 0 R_ERR response for host-to-device data FIS |
|---|
| 410 | 0x0005 4 0 R_ERR response for non-data FIS |
|---|
| 411 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS |
|---|
| 412 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS |
|---|
| 413 | 0x0008 2 0 Device-to-host non-data FIS retries |
|---|
| 414 | 0x0009 4 9899 Transition from drive PhyRdy to drive PhyNRdy |
|---|
| 415 | 0x000a 4 20 Device-to-host register FISes sent due to a COMRESET |
|---|
| 416 | 0x000b 4 0 CRC errors within host-to-device FIS |
|---|
| 417 | 0x000d 4 0 Non-CRC errors within host-to-device FIS |
|---|
| 418 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC |
|---|
| 419 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC |
|---|
| 420 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC |
|---|
| 421 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC |
|---|
| 422 | |
|---|
| 423 | |
|---|
| 424 | |
|---|
| 425 | |
|---|
| 426 | |
|---|
| 427 | |
|---|
| 428 | |
|---|
| 429 | |
|---|
| 430 | |
|---|
| 431 | |
|---|
| 432 | |
|---|
| 433 | |
|---|
| 434 | |
|---|
| 435 | |
|---|
| 436 | |
|---|
| 437 | |
|---|
| 438 | |
|---|
| 439 | |
|---|
| 440 | |
|---|
| 441 | |
|---|
| 442 | |
|---|
| 443 | |
|---|
| 444 | |
|---|
| 445 | RUNNING GDLVM7 |
|---|
