1 | smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.5.0-2-amd64] (local build)
|
---|
2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Device Model: ST5000DM000-1FK178
|
---|
6 | Serial Number: <snip>
|
---|
7 | LU WWN Device Id: 5 000c50 0902c07de
|
---|
8 | Firmware Version: CC49
|
---|
9 | User Capacity: 5.000.981.078.016 bytes [5,00 TB]
|
---|
10 | Sector Sizes: 512 bytes logical, 4096 bytes physical
|
---|
11 | Rotation Rate: 5980 rpm
|
---|
12 | Device is: Not in smartctl database [for details use: -P showall]
|
---|
13 | ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
|
---|
14 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
|
---|
15 | Local Time is: Tue Jun 14 00:32:57 2016 CEST
|
---|
16 | SMART support is: Available - device has SMART capability.
|
---|
17 | SMART support is: Enabled
|
---|
18 | AAM feature is: Unavailable
|
---|
19 | APM level is: 128 (minimum power consumption without standby)
|
---|
20 | Rd look-ahead is: Enabled
|
---|
21 | Write cache is: Enabled
|
---|
22 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
---|
23 | Wt Cache Reorder: Enabled
|
---|
24 |
|
---|
25 | === START OF READ SMART DATA SECTION ===
|
---|
26 | SMART overall-health self-assessment test result: PASSED
|
---|
27 |
|
---|
28 | General SMART Values:
|
---|
29 | Offline data collection status: (0x00) Offline data collection activity
|
---|
30 | was never started.
|
---|
31 | Auto Offline Data Collection: Disabled.
|
---|
32 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
33 | without error or no self-test has ever
|
---|
34 | been run.
|
---|
35 | Total time to complete Offline
|
---|
36 | data collection: ( 96) seconds.
|
---|
37 | Offline data collection
|
---|
38 | capabilities: (0x73) SMART execute Offline immediate.
|
---|
39 | Auto Offline data collection on/off support.
|
---|
40 | Suspend Offline collection upon new
|
---|
41 | command.
|
---|
42 | No Offline surface scan supported.
|
---|
43 | Self-test supported.
|
---|
44 | Conveyance Self-test supported.
|
---|
45 | Selective Self-test supported.
|
---|
46 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
47 | power-saving mode.
|
---|
48 | Supports SMART auto save timer.
|
---|
49 | Error logging capability: (0x01) Error logging supported.
|
---|
50 | General Purpose Logging supported.
|
---|
51 | Short self-test routine
|
---|
52 | recommended polling time: ( 1) minutes.
|
---|
53 | Extended self-test routine
|
---|
54 | recommended polling time: ( 613) minutes.
|
---|
55 | Conveyance self-test routine
|
---|
56 | recommended polling time: ( 2) minutes.
|
---|
57 | SCT capabilities: (0x3035) SCT Status supported.
|
---|
58 | SCT Feature Control supported.
|
---|
59 | SCT Data Table supported.
|
---|
60 |
|
---|
61 | SMART Attributes Data Structure revision number: 10
|
---|
62 | Vendor Specific SMART Attributes with Thresholds:
|
---|
63 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
---|
64 | 1 Raw_Read_Error_Rate POSR-- 100 100 006 - 699320
|
---|
65 | 3 Spin_Up_Time PO---- 096 096 000 - 0
|
---|
66 | 4 Start_Stop_Count -O--CK 100 100 020 - 4
|
---|
67 | 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
---|
68 | 7 Seek_Error_Rate POSR-- 100 253 030 - 779
|
---|
69 | 9 Power_On_Hours -O--CK 100 100 000 - 0
|
---|
70 | 10 Spin_Retry_Count PO--C- 100 100 097 - 0
|
---|
71 | 12 Power_Cycle_Count -O--CK 100 100 020 - 4
|
---|
72 | 183 Runtime_Bad_Block -O--CK 100 100 000 - 0
|
---|
73 | 184 End-to-End_Error -O--CK 100 100 099 - 0
|
---|
74 | 187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
---|
75 | 188 Command_Timeout -O--CK 100 100 000 - 0
|
---|
76 | 189 High_Fly_Writes -O-RCK 100 100 000 - 0
|
---|
77 | 190 Airflow_Temperature_Cel -O---K 071 071 045 - 29 (Min/Max 23/29)
|
---|
78 | 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
|
---|
79 | 192 Power-Off_Retract_Count -O--CK 100 100 000 - 1
|
---|
80 | 193 Load_Cycle_Count -O--CK 100 100 000 - 7
|
---|
81 | 194 Temperature_Celsius -O---K 029 040 000 - 29 (0 18 0 0 0)
|
---|
82 | 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 699320
|
---|
83 | 197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
---|
84 | 198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
---|
85 | 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
|
---|
86 | 240 Head_Flying_Hours ------ 100 253 000 - 0 (71 32 0)
|
---|
87 | 241 Total_LBAs_Written ------ 100 253 000 - 1786931
|
---|
88 | 242 Total_LBAs_Read ------ 100 253 000 - 2687611
|
---|
89 | ||||||_ K auto-keep
|
---|
90 | |||||__ C event count
|
---|
91 | ||||___ R error rate
|
---|
92 | |||____ S speed/performance
|
---|
93 | ||_____ O updated online
|
---|
94 | |______ P prefailure warning
|
---|
95 |
|
---|
96 | General Purpose Log Directory Version 1
|
---|
97 | SMART Log Directory Version 1 [multi-sector log support]
|
---|
98 | Address Access R/W Size Description
|
---|
99 | 0x00 GPL,SL R/O 1 Log Directory
|
---|
100 | 0x01 SL R/O 1 Summary SMART error log
|
---|
101 | 0x02 SL R/O 5 Comprehensive SMART error log
|
---|
102 | 0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
---|
103 | 0x06 SL R/O 1 SMART self-test log
|
---|
104 | 0x07 GPL R/O 1 Extended self-test log
|
---|
105 | 0x09 SL R/W 1 Selective self-test log
|
---|
106 | 0x10 GPL R/O 1 SATA NCQ Queued Error log
|
---|
107 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
---|
108 | 0x21 GPL R/O 1 Write stream error log
|
---|
109 | 0x22 GPL R/O 1 Read stream error log
|
---|
110 | 0x24 GPL R/O 512 Current Device Internal Status Data log
|
---|
111 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
---|
112 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
---|
113 | 0xa1 GPL,SL VS 24 Device vendor specific log
|
---|
114 | 0xa2 GPL VS 8160 Device vendor specific log
|
---|
115 | 0xa8 GPL,SL VS 136 Device vendor specific log
|
---|
116 | 0xa9 GPL,SL VS 1 Device vendor specific log
|
---|
117 | 0xab GPL VS 1 Device vendor specific log
|
---|
118 | 0xb0 GPL VS 8920 Device vendor specific log
|
---|
119 | 0xbe-0xbf GPL VS 65528 Device vendor specific log
|
---|
120 | 0xc0 GPL,SL VS 1 Device vendor specific log
|
---|
121 | 0xc1 GPL,SL VS 16 Device vendor specific log
|
---|
122 | 0xc2 GPL,SL VS 56 Device vendor specific log
|
---|
123 | 0xc4 GPL,SL VS 24 Device vendor specific log
|
---|
124 | 0xc7 GPL,SL VS 8 Device vendor specific log
|
---|
125 | 0xd1 GPL,SL VS 64 Device vendor specific log
|
---|
126 | 0xd3 GPL VS 1920 Device vendor specific log
|
---|
127 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
---|
128 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
---|
129 |
|
---|
130 | SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
---|
131 | No Errors Logged
|
---|
132 |
|
---|
133 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
---|
134 | No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
---|
135 |
|
---|
136 | SMART Selective self-test log data structure revision number 1
|
---|
137 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
138 | 1 0 0 Not_testing
|
---|
139 | 2 0 0 Not_testing
|
---|
140 | 3 0 0 Not_testing
|
---|
141 | 4 0 0 Not_testing
|
---|
142 | 5 0 0 Not_testing
|
---|
143 | Selective self-test flags (0x0):
|
---|
144 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
145 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
146 |
|
---|
147 | SCT Status Version: 3
|
---|
148 | SCT Version (vendor specific): 522 (0x020a)
|
---|
149 | SCT Support Level: 1
|
---|
150 | Device State: Active (0)
|
---|
151 | Current Temperature: 29 Celsius
|
---|
152 | Power Cycle Min/Max Temperature: 23/29 Celsius
|
---|
153 | Lifetime Min/Max Temperature: 18/50 Celsius
|
---|
154 | Under/Over Temperature Limit Count: 0/0
|
---|
155 |
|
---|
156 | SCT Temperature History Version: 2
|
---|
157 | Temperature Sampling Period: 3 minutes
|
---|
158 | Temperature Logging Interval: 59 minutes
|
---|
159 | Min/Max recommended Temperature: 14/55 Celsius
|
---|
160 | Min/Max Temperature Limit: 10/60 Celsius
|
---|
161 | Temperature History Size (Index): 128 (8)
|
---|
162 |
|
---|
163 | Index Estimated Time Temperature Celsius
|
---|
164 | 9 2016-06-08 18:44 ? -
|
---|
165 | ... ..(117 skipped). .. -
|
---|
166 | 127 2016-06-13 14:46 ? -
|
---|
167 | 0 2016-06-13 15:45 50 *******************************
|
---|
168 | 1 2016-06-13 16:44 ? -
|
---|
169 | 2 2016-06-13 17:43 18 -
|
---|
170 | 3 2016-06-13 18:42 ? -
|
---|
171 | 4 2016-06-13 19:41 20 *
|
---|
172 | 5 2016-06-13 20:40 ? -
|
---|
173 | 6 2016-06-13 21:39 22 ***
|
---|
174 | 7 2016-06-13 22:38 ? -
|
---|
175 | 8 2016-06-13 23:37 23 ****
|
---|
176 |
|
---|
177 | SCT Error Recovery Control command not supported
|
---|
178 |
|
---|
179 | Device Statistics (GP/SMART Log 0x04) not supported
|
---|
180 |
|
---|
181 | SATA Phy Event Counters (GP Log 0x11)
|
---|
182 | ID Size Value Description
|
---|
183 | 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
|
---|
184 | 0x0001 2 0 Command failed due to ICRC error
|
---|
185 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
---|
186 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
---|
187 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
---|
188 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
---|
189 |
|
---|