1 | |
---|
2 | /dev/sdb: |
---|
3 | |
---|
4 | ATA device, with non-removable media |
---|
5 | Model Number: ST5000DM000-1FK178 |
---|
6 | Serial Number: <snip> |
---|
7 | Firmware Revision: CC49 |
---|
8 | Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0 |
---|
9 | Standards: |
---|
10 | Used: unknown (minor revision code 0x001f) |
---|
11 | Supported: 9 8 7 6 5 |
---|
12 | Likely used: 9 |
---|
13 | Configuration: |
---|
14 | Logical max current |
---|
15 | cylinders 16383 16383 |
---|
16 | heads 16 16 |
---|
17 | sectors/track 63 63 |
---|
18 | -- |
---|
19 | CHS current addressable sectors: 16514064 |
---|
20 | LBA user addressable sectors: 268435455 |
---|
21 | LBA48 user addressable sectors: 9767541168 |
---|
22 | Logical Sector size: 512 bytes |
---|
23 | Physical Sector size: 4096 bytes |
---|
24 | Logical Sector-0 offset: 0 bytes |
---|
25 | device size with M = 1024*1024: 4769307 MBytes |
---|
26 | device size with M = 1000*1000: 5000981 MBytes (5000 GB) |
---|
27 | cache/buffer size = 16384 KBytes |
---|
28 | Nominal Media Rotation Rate: 5980 |
---|
29 | Capabilities: |
---|
30 | LBA, IORDY(can be disabled) |
---|
31 | Queue depth: 32 |
---|
32 | Standby timer values: spec'd by Standard, no device specific minimum |
---|
33 | R/W multiple sector transfer: Max = 16 Current = ? |
---|
34 | Advanced power management level: 128 |
---|
35 | Recommended acoustic management value: 208, current value: 208 |
---|
36 | DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 |
---|
37 | Cycle time: min=120ns recommended=120ns |
---|
38 | PIO: pio0 pio1 pio2 pio3 pio4 |
---|
39 | Cycle time: no flow control=120ns IORDY flow control=120ns |
---|
40 | Commands/features: |
---|
41 | Enabled Supported: |
---|
42 | * SMART feature set |
---|
43 | Security Mode feature set |
---|
44 | * Power Management feature set |
---|
45 | * Write cache |
---|
46 | * Look-ahead |
---|
47 | * Host Protected Area feature set |
---|
48 | * WRITE_BUFFER command |
---|
49 | * READ_BUFFER command |
---|
50 | * DOWNLOAD_MICROCODE |
---|
51 | * Advanced Power Management feature set |
---|
52 | Power-Up In Standby feature set |
---|
53 | * SET_FEATURES required to spinup after power up |
---|
54 | SET_MAX security extension |
---|
55 | * 48-bit Address feature set |
---|
56 | * Device Configuration Overlay feature set |
---|
57 | * Mandatory FLUSH_CACHE |
---|
58 | * FLUSH_CACHE_EXT |
---|
59 | * SMART error logging |
---|
60 | * SMART self-test |
---|
61 | * General Purpose Logging feature set |
---|
62 | * WRITE_{DMA|MULTIPLE}_FUA_EXT |
---|
63 | * 64-bit World wide name |
---|
64 | * IDLE_IMMEDIATE with UNLOAD |
---|
65 | * WRITE_UNCORRECTABLE_EXT command |
---|
66 | * {READ,WRITE}_DMA_EXT_GPL commands |
---|
67 | * Segmented DOWNLOAD_MICROCODE |
---|
68 | unknown 119[6] |
---|
69 | * Gen1 signaling speed (1.5Gb/s) |
---|
70 | * Gen2 signaling speed (3.0Gb/s) |
---|
71 | * Gen3 signaling speed (6.0Gb/s) |
---|
72 | * Native Command Queueing (NCQ) |
---|
73 | * Phy event counters |
---|
74 | * Idle-Unload when NCQ is active |
---|
75 | * READ_LOG_DMA_EXT equivalent to READ_LOG_EXT |
---|
76 | DMA Setup Auto-Activate optimization |
---|
77 | Device-initiated interface power management |
---|
78 | * Software settings preservation |
---|
79 | unknown 78[7] |
---|
80 | * SMART Command Transport (SCT) feature set |
---|
81 | * SCT Write Same (AC2) |
---|
82 | * SCT Features Control (AC4) |
---|
83 | * SCT Data Tables (AC5) |
---|
84 | unknown 206[12] (vendor specific) |
---|
85 | unknown 206[13] (vendor specific) |
---|
86 | Security: |
---|
87 | Master password revision code = 65534 |
---|
88 | supported |
---|
89 | not enabled |
---|
90 | not locked |
---|
91 | not frozen |
---|
92 | not expired: security count |
---|
93 | supported: enhanced erase |
---|
94 | Logical Unit WWN Device Identifier: 5000c50<snip> |
---|
95 | NAA : 5 |
---|
96 | IEEE OUI : 000c50 |
---|
97 | Unique ID : <snip> |
---|
98 | Checksum: correct |
---|