| 1 | smartctl 6.4 2015-06-04 r4109 [x86_64-linux-3.10.0-229.el7.x86_64] (local build)
|
|---|
| 2 | Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | /dev/sda [megaraid_disk_02] [SAT]: Device open changed type from 'megaraid,2' to 'sat+megaraid,2'
|
|---|
| 5 | === START OF INFORMATION SECTION ===
|
|---|
| 6 | Device Model: SanDisk SDSSDA240G
|
|---|
| 7 | Firmware Version: U21010RL
|
|---|
| 8 | User Capacity: 240,057,409,536 bytes [240 GB]
|
|---|
| 9 | Sector Size: 512 bytes logical/physical
|
|---|
| 10 | Rotation Rate: Solid State Device
|
|---|
| 11 | Form Factor: 2.5 inches
|
|---|
| 12 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 13 | ATA Version is: ACS-2 T13/2015-D revision 3
|
|---|
| 14 | SATA Version is: SATA 3.2, 6.0 Gb/s (current: 1.5 Gb/s)
|
|---|
| 15 | Local Time is: Thu Mar 24 16:42:35 2016 CST
|
|---|
| 16 | SMART support is: Available - device has SMART capability.
|
|---|
| 17 | SMART support is: Enabled
|
|---|
| 18 | AAM feature is: Unavailable
|
|---|
| 19 | APM feature is: Disabled
|
|---|
| 20 | Rd look-ahead is: Enabled
|
|---|
| 21 | Write cache is: Enabled
|
|---|
| 22 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|---|
| 23 | Wt Cache Reorder: Unavailable
|
|---|
| 24 |
|
|---|
| 25 | === START OF READ SMART DATA SECTION ===
|
|---|
| 26 | SMART Status not supported: ATA return descriptor not supported by controller firmware
|
|---|
| 27 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 28 | Warning: This result is based on an Attribute check.
|
|---|
| 29 |
|
|---|
| 30 | General SMART Values:
|
|---|
| 31 | Offline data collection status: (0x02) Offline data collection activity
|
|---|
| 32 | was completed without error.
|
|---|
| 33 | Auto Offline Data Collection: Disabled.
|
|---|
| 34 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 35 | without error or no self-test has ever
|
|---|
| 36 | been run.
|
|---|
| 37 | Total time to complete Offline
|
|---|
| 38 | data collection: ( 0) seconds.
|
|---|
| 39 | Offline data collection
|
|---|
| 40 | capabilities: (0x71) SMART execute Offline immediate.
|
|---|
| 41 | No Auto Offline data collection support.
|
|---|
| 42 | Suspend Offline collection upon new
|
|---|
| 43 | command.
|
|---|
| 44 | No Offline surface scan supported.
|
|---|
| 45 | Self-test supported.
|
|---|
| 46 | Conveyance Self-test supported.
|
|---|
| 47 | Selective Self-test supported.
|
|---|
| 48 | SMART capabilities: (0x0002) Does not save SMART data before
|
|---|
| 49 | entering power-saving mode.
|
|---|
| 50 | Supports SMART auto save timer.
|
|---|
| 51 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 52 | General Purpose Logging supported.
|
|---|
| 53 | Short self-test routine
|
|---|
| 54 | recommended polling time: ( 2) minutes.
|
|---|
| 55 | Extended self-test routine
|
|---|
| 56 | recommended polling time: ( 10) minutes.
|
|---|
| 57 | Conveyance self-test routine
|
|---|
| 58 | recommended polling time: ( 2) minutes.
|
|---|
| 59 |
|
|---|
| 60 | SMART Attributes Data Structure revision number: 1
|
|---|
| 61 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 62 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 63 | 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0
|
|---|
| 64 | 9 Power_On_Hours -O--CK 005 100 000 - 5
|
|---|
| 65 | 12 Power_Cycle_Count -O--CK 100 100 000 - 12
|
|---|
| 66 | 166 Unknown_Attribute -O--CK 100 100 000 - 0
|
|---|
| 67 | 167 Unknown_Attribute -O--CK 100 100 000 - 0
|
|---|
| 68 | 168 Unknown_Attribute -O--CK 100 100 000 - 1
|
|---|
| 69 | 169 Unknown_Attribute -O--CK 100 100 000 - 28
|
|---|
| 70 | 170 Unknown_Attribute -O--CK 100 100 000 - 0
|
|---|
| 71 | 171 Unknown_Attribute -O--CK 100 100 000 - 0
|
|---|
| 72 | 172 Unknown_Attribute -O--CK 100 100 000 - 0
|
|---|
| 73 | 173 Unknown_Attribute -O--CK 100 100 --- - 0
|
|---|
| 74 | 174 Unknown_Attribute -O--CK 100 100 000 - 11
|
|---|
| 75 | 187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
|---|
| 76 | 194 Temperature_Celsius -O---K 070 100 000 - 30 (Min/Max 0/36)
|
|---|
| 77 | 199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 1
|
|---|
| 78 | 230 Unknown_SSD_Attribute -O--CK 100 100 000 - 0
|
|---|
| 79 | 232 Available_Reservd_Space PO--CK 100 100 004 - 100
|
|---|
| 80 | 233 Media_Wearout_Indicator -O--CK 100 100 000 - 122
|
|---|
| 81 | 241 Total_LBAs_Written ----CK 253 253 000 - 121
|
|---|
| 82 | 242 Total_LBAs_Read ----CK 253 253 000 - 499
|
|---|
| 83 | ||||||_ K auto-keep
|
|---|
| 84 | |||||__ C event count
|
|---|
| 85 | ||||___ R error rate
|
|---|
| 86 | |||____ S speed/performance
|
|---|
| 87 | ||_____ O updated online
|
|---|
| 88 | |______ P prefailure warning
|
|---|
| 89 |
|
|---|
| 90 | General Purpose Log Directory Version 1
|
|---|
| 91 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 92 | Address Access R/W Size Description
|
|---|
| 93 | 0x00 GPL,SL R/O 1 Log Directory
|
|---|
| 94 | 0x01 GPL,SL R/O 1 Summary SMART error log
|
|---|
| 95 | 0x02 GPL,SL R/O 1 Comprehensive SMART error log
|
|---|
| 96 | 0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log
|
|---|
| 97 | 0x04 GPL,SL R/O 8 Device Statistics log
|
|---|
| 98 | 0x06 GPL,SL R/O 1 SMART self-test log
|
|---|
| 99 | 0x07 GPL,SL R/O 1 Extended self-test log
|
|---|
| 100 | 0x09 GPL,SL R/W 1 Selective self-test log
|
|---|
| 101 | 0x10 GPL,SL R/O 1 SATA NCQ Queued Error log
|
|---|
| 102 | 0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
|---|
| 103 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|---|
| 104 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|---|
| 105 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
|---|
| 106 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|---|
| 107 |
|
|---|
| 108 | SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
|---|
| 109 | Device Error Count: 1
|
|---|
| 110 | CR = Command Register
|
|---|
| 111 | FEATR = Features Register
|
|---|
| 112 | COUNT = Count (was: Sector Count) Register
|
|---|
| 113 | LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
|---|
| 114 | LH = LBA High (was: Cylinder High) Register ] LBA
|
|---|
| 115 | LM = LBA Mid (was: Cylinder Low) Register ] Register
|
|---|
| 116 | LL = LBA Low (was: Sector Number) Register ]
|
|---|
| 117 | DV = Device (was: Device/Head) Register
|
|---|
| 118 | DC = Device Control Register
|
|---|
| 119 | ER = Error register
|
|---|
| 120 | ST = Status register
|
|---|
| 121 | Powered_Up_Time is measured from power on, and printed as
|
|---|
| 122 | DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
|---|
| 123 | SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
|---|
| 124 |
|
|---|
| 125 | Error 1 [0] log entry is empty
|
|---|
| 126 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
|---|
| 127 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 128 | # 1 Short offline Completed without error 00% 5 -
|
|---|
| 129 |
|
|---|
| 130 | SMART Selective self-test log data structure revision number 1
|
|---|
| 131 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 132 | 1 0 0 Not_testing
|
|---|
| 133 | 2 0 0 Not_testing
|
|---|
| 134 | 3 0 0 Not_testing
|
|---|
| 135 | 4 0 0 Not_testing
|
|---|
| 136 | 5 0 0 Not_testing
|
|---|
| 137 | Selective self-test flags (0x0):
|
|---|
| 138 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 139 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 140 |
|
|---|
| 141 | SCT Commands not supported
|
|---|
| 142 |
|
|---|
| 143 | Device Statistics (GP Log 0x04)
|
|---|
| 144 | Page Offset Size Value Flags Description
|
|---|
| 145 | 0x01 ===== = = === == General Statistics (rev 2) ==
|
|---|
| 146 | 0x01 0x008 4 12 --- Lifetime Power-On Resets
|
|---|
| 147 | 0x01 0x010 4 5 --- Power-on Hours
|
|---|
| 148 | 0x01 0x018 6 121 --- Logical Sectors Written
|
|---|
| 149 | 0x01 0x020 6 2438754 --- Number of Write Commands
|
|---|
| 150 | 0x01 0x028 6 499 --- Logical Sectors Read
|
|---|
| 151 | 0x01 0x030 6 8745636 --- Number of Read Commands
|
|---|
| 152 | 0x02 ===== = = === == Free-Fall Statistics (empty) ==
|
|---|
| 153 | 0x03 ===== = = === == Rotating Media Statistics (empty) ==
|
|---|
| 154 | 0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
|---|
| 155 | 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
|---|
| 156 | 0x04 0x010 4 12 --- Resets Between Cmd Acceptance and Completion
|
|---|
| 157 | 0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
|---|
| 158 | 0x05 0x008 1 30 --- Current Temperature
|
|---|
| 159 | 0x05 0x010 1 17 --- Average Short Term Temperature
|
|---|
| 160 | 0x05 0x018 1 65 --- Average Long Term Temperature
|
|---|
| 161 | 0x05 0x020 1 36 --- Highest Temperature
|
|---|
| 162 | 0x05 0x028 1 19 --- Lowest Temperature
|
|---|
| 163 | 0x05 0x030 1 21 --- Highest Average Short Term Temperature
|
|---|
| 164 | 0x05 0x038 1 0 --- Lowest Average Short Term Temperature
|
|---|
| 165 | 0x05 0x040 1 65 --- Highest Average Long Term Temperature
|
|---|
| 166 | 0x05 0x048 1 1 --- Lowest Average Long Term Temperature
|
|---|
| 167 | 0x05 0x050 4 0 --- Time in Over-Temperature
|
|---|
| 168 | 0x05 0x058 1 100 --- Specified Maximum Operating Temperature
|
|---|
| 169 | 0x05 0x060 4 0 --- Time in Under-Temperature
|
|---|
| 170 | 0x05 0x068 1 0 --- Specified Minimum Operating Temperature
|
|---|
| 171 | 0x06 ===== = = === == Transport Statistics (rev 1) ==
|
|---|
| 172 | 0x06 0x008 4 162 --- Number of Hardware Resets
|
|---|
| 173 | 0x06 0x018 4 0 --- Number of Interface CRC Errors
|
|---|
| 174 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
|---|
| 175 | 0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
|---|
| 176 | |||_ C monitored condition met
|
|---|
| 177 | ||__ D supports DSN
|
|---|
| 178 | |___ N normalized value
|
|---|
| 179 |
|
|---|
| 180 | SATA Phy Event Counters (GP Log 0x11)
|
|---|
| 181 | ID Size Value Description
|
|---|
| 182 | 0x0001 2 0 Command failed due to ICRC error
|
|---|
| 183 | 0x0002 2 0 R_ERR response for data FIS
|
|---|
| 184 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
|---|
| 185 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
|---|
| 186 | 0x0005 2 0 R_ERR response for non-data FIS
|
|---|
| 187 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|---|
| 188 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|---|
| 189 | 0x0008 2 0 Device-to-host non-data FIS retries
|
|---|
| 190 | 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
|
|---|
| 191 | 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
|
|---|
| 192 | 0x000b 2 0 CRC errors within host-to-device FIS
|
|---|
| 193 | 0x000d 2 0 Non-CRC errors within host-to-device FIS
|
|---|
| 194 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|---|
| 195 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
|---|
| 196 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
|---|
| 197 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
|---|
| 198 |
|
|---|
