| 1 | smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.1.2-gentoo] (local build)
|
|---|
| 2 | Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: OCZ-VELO DRIVE
|
|---|
| 6 | Serial Number: OCZ-6739H792UI90LEKV
|
|---|
| 7 | LU WWN Device Id: 5 e83a97 f181d86f8
|
|---|
| 8 | Firmware Version: 1.33
|
|---|
| 9 | User Capacity: 75,025,391,616 bytes [75.0 GB]
|
|---|
| 10 | Sector Size: 512 bytes logical/physical
|
|---|
| 11 | Rotation Rate: Solid State Device
|
|---|
| 12 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 13 | ATA Version is: ATA8-ACS T13/1699-D revision 6
|
|---|
| 14 | SATA Version is: SATA 2.6, 3.0 Gb/s
|
|---|
| 15 | Local Time is: Tue Sep 1 22:00:17 2015 CEST
|
|---|
| 16 | SMART support is: Available - device has SMART capability.
|
|---|
| 17 | SMART support is: Enabled
|
|---|
| 18 |
|
|---|
| 19 | === START OF READ SMART DATA SECTION ===
|
|---|
| 20 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 21 |
|
|---|
| 22 | General SMART Values:
|
|---|
| 23 | Offline data collection status: (0x00) Offline data collection activity
|
|---|
| 24 | was never started.
|
|---|
| 25 | Auto Offline Data Collection: Disabled.
|
|---|
| 26 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 27 | without error or no self-test has ever
|
|---|
| 28 | been run.
|
|---|
| 29 | Total time to complete Offline
|
|---|
| 30 | data collection: ( 0) seconds.
|
|---|
| 31 | Offline data collection
|
|---|
| 32 | capabilities: (0x7f) SMART execute Offline immediate.
|
|---|
| 33 | Auto Offline data collection on/off support.
|
|---|
| 34 | Abort Offline collection upon new
|
|---|
| 35 | command.
|
|---|
| 36 | Offline surface scan supported.
|
|---|
| 37 | Self-test supported.
|
|---|
| 38 | Conveyance Self-test supported.
|
|---|
| 39 | Selective Self-test supported.
|
|---|
| 40 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 41 | power-saving mode.
|
|---|
| 42 | Supports SMART auto save timer.
|
|---|
| 43 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 44 | General Purpose Logging supported.
|
|---|
| 45 | Short self-test routine
|
|---|
| 46 | recommended polling time: ( 1) minutes.
|
|---|
| 47 | Extended self-test routine
|
|---|
| 48 | recommended polling time: ( 5) minutes.
|
|---|
| 49 | Conveyance self-test routine
|
|---|
| 50 | recommended polling time: ( 2) minutes.
|
|---|
| 51 | SCT capabilities: (0x003d) SCT Status supported.
|
|---|
| 52 | SCT Error Recovery Control supported.
|
|---|
| 53 | SCT Feature Control supported.
|
|---|
| 54 | SCT Data Table supported.
|
|---|
| 55 |
|
|---|
| 56 | SMART Attributes Data Structure revision number: 10
|
|---|
| 57 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 58 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|---|
| 59 | 1 Raw_Read_Error_Rate 0x000f 120 120 050 Pre-fail Always - 0
|
|---|
| 60 | 5 Reallocated_Sector_Ct 0x0033 100 100 003 Pre-fail Always - 0
|
|---|
| 61 | 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 32540 (252 188 0)
|
|---|
| 62 | 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 56
|
|---|
| 63 | 13 Read_Soft_Error_Rate 0x000a 120 120 000 Old_age Always - 25671019528192
|
|---|
| 64 | 100 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 3264
|
|---|
| 65 | 170 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 13008
|
|---|
| 66 | 171 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0
|
|---|
| 67 | 172 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0
|
|---|
| 68 | 174 Unknown_Attribute 0x0030 000 000 000 Old_age Offline - 50
|
|---|
| 69 | 177 Wear_Leveling_Count 0x0000 000 000 000 Old_age Offline - 0
|
|---|
| 70 | 181 Program_Fail_Cnt_Total 0x0032 000 000 000 Old_age Always - 0
|
|---|
| 71 | 182 Erase_Fail_Count_Total 0x0032 000 000 000 Old_age Always - 0
|
|---|
| 72 | 184 End-to-End_Error 0x0032 100 100 090 Old_age Always - 0
|
|---|
| 73 | 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 74 | 194 Temperature_Celsius 0x0022 030 030 000 Old_age Always - 30 (Min/Max 30/30)
|
|---|
| 75 | 195 Hardware_ECC_Recovered 0x001c 120 120 000 Old_age Offline - 0
|
|---|
| 76 | 196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0
|
|---|
| 77 | 198 Offline_Uncorrectable 0x0010 120 120 000 Old_age Offline - 0
|
|---|
| 78 | 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
|
|---|
| 79 | 201 Unknown_SSD_Attribute 0x001c 120 120 000 Old_age Offline - 0
|
|---|
| 80 | 204 Soft_ECC_Correction 0x001c 120 120 000 Old_age Offline - 0
|
|---|
| 81 | 230 Unknown_SSD_Attribute 0x0013 100 100 000 Pre-fail Always - 100
|
|---|
| 82 | 231 Temperature_Celsius 0x0013 100 100 010 Pre-fail Always - 0
|
|---|
| 83 | 232 Available_Reservd_Space 0x0000 000 000 000 Old_age Offline - 25
|
|---|
| 84 | 233 Media_Wearout_Indicator 0x0000 000 000 000 Old_age Offline - 6592
|
|---|
| 85 | 234 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 4224
|
|---|
| 86 | 235 Unknown_Attribute 0x0033 100 100 002 Pre-fail Always - 0
|
|---|
| 87 | 241 Total_LBAs_Written 0x0032 000 000 000 Old_age Always - 4224
|
|---|
| 88 | 242 Total_LBAs_Read 0x0032 000 000 000 Old_age Always - 11200
|
|---|
| 89 |
|
|---|
| 90 | SMART Error Log not supported
|
|---|
| 91 |
|
|---|
| 92 | SMART Self-test Log not supported
|
|---|
| 93 |
|
|---|
| 94 | SMART Selective self-test log data structure revision number 1
|
|---|
| 95 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 96 | 1 0 0 Not_testing
|
|---|
| 97 | 2 0 0 Not_testing
|
|---|
| 98 | 3 0 0 Not_testing
|
|---|
| 99 | 4 0 0 Not_testing
|
|---|
| 100 | 5 0 0 Not_testing
|
|---|
| 101 | Selective self-test flags (0x0):
|
|---|
| 102 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 103 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 104 |
|
|---|
