| 1 | smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.19.3] (local build)
|
|---|
| 2 | Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: WDC WD10JFCX-68N6GN0
|
|---|
| 6 | Firmware Version: 82.00A82
|
|---|
| 7 | User Capacity: 1,000,204,886,016 bytes [1.00 TB]
|
|---|
| 8 | Sector Sizes: 512 bytes logical, 4096 bytes physical
|
|---|
| 9 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 10 | ATA Version is: 9
|
|---|
| 11 | ATA Standard is: Exact ATA specification draft version not indicated
|
|---|
| 12 | Local Time is: Mon Mar 14 13:42:13 2016 CET
|
|---|
| 13 | SMART support is: Available - device has SMART capability.
|
|---|
| 14 | SMART support is: Enabled
|
|---|
| 15 |
|
|---|
| 16 | === START OF READ SMART DATA SECTION ===
|
|---|
| 17 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 18 |
|
|---|
| 19 | General SMART Values:
|
|---|
| 20 | Offline data collection status: (0x00) Offline data collection activity
|
|---|
| 21 | was never started.
|
|---|
| 22 | Auto Offline Data Collection: Disabled.
|
|---|
| 23 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 24 | without error or no self-test has ever
|
|---|
| 25 | been run.
|
|---|
| 26 | Total time to complete Offline
|
|---|
| 27 | data collection: (18480) seconds.
|
|---|
| 28 | Offline data collection
|
|---|
| 29 | capabilities: (0x7b) SMART execute Offline immediate.
|
|---|
| 30 | Auto Offline data collection on/off support.
|
|---|
| 31 | Suspend Offline collection upon new
|
|---|
| 32 | command.
|
|---|
| 33 | Offline surface scan supported.
|
|---|
| 34 | Self-test supported.
|
|---|
| 35 | Conveyance Self-test supported.
|
|---|
| 36 | Selective Self-test supported.
|
|---|
| 37 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 38 | power-saving mode.
|
|---|
| 39 | Supports SMART auto save timer.
|
|---|
| 40 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 41 | General Purpose Logging supported.
|
|---|
| 42 | Short self-test routine
|
|---|
| 43 | recommended polling time: ( 2) minutes.
|
|---|
| 44 | Extended self-test routine
|
|---|
| 45 | recommended polling time: ( 207) minutes.
|
|---|
| 46 | Conveyance self-test routine
|
|---|
| 47 | recommended polling time: ( 5) minutes.
|
|---|
| 48 | SCT capabilities: (0x703d) SCT Status supported.
|
|---|
| 49 | SCT Error Recovery Control supported.
|
|---|
| 50 | SCT Feature Control supported.
|
|---|
| 51 | SCT Data Table supported.
|
|---|
| 52 |
|
|---|
| 53 | SMART Attributes Data Structure revision number: 16
|
|---|
| 54 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 55 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 56 | 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
|
|---|
| 57 | 3 Spin_Up_Time POS--K 184 183 021 - 1775
|
|---|
| 58 | 4 Start_Stop_Count -O--CK 100 100 000 - 20
|
|---|
| 59 | 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
|
|---|
| 60 | 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
|
|---|
| 61 | 9 Power_On_Hours -O--CK 097 096 000 - 2901
|
|---|
| 62 | 10 Spin_Retry_Count -O--CK 100 253 000 - 0
|
|---|
| 63 | 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
|
|---|
| 64 | 12 Power_Cycle_Count -O--CK 100 100 000 - 19
|
|---|
| 65 | 192 Power-Off_Retract_Count -O--CK 200 200 000 - 4
|
|---|
| 66 | 193 Load_Cycle_Count -O--CK 200 200 000 - 288
|
|---|
| 67 | 194 Temperature_Celsius -O---K 123 119 000 - 24
|
|---|
| 68 | 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
|
|---|
| 69 | 197 Current_Pending_Sector -O--CK 200 200 000 - 0
|
|---|
| 70 | 198 Offline_Uncorrectable ----CK 100 253 000 - 0
|
|---|
| 71 | 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
|
|---|
| 72 | 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
|
|---|
| 73 | ||||||_ K auto-keep
|
|---|
| 74 | |||||__ C event count
|
|---|
| 75 | ||||___ R error rate
|
|---|
| 76 | |||____ S speed/performance
|
|---|
| 77 | ||_____ O updated online
|
|---|
| 78 | |______ P prefailure warning
|
|---|
| 79 |
|
|---|
| 80 | General Purpose Log Directory Version 1
|
|---|
| 81 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 82 | GP/S Log at address 0x00 has 1 sectors [Log Directory]
|
|---|
| 83 | SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
|
|---|
| 84 | SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log]
|
|---|
| 85 | GP Log at address 0x03 has 6 sectors [Ext. Comprehensive SMART error log]
|
|---|
| 86 | SMART Log at address 0x06 has 1 sectors [SMART self-test log]
|
|---|
| 87 | GP Log at address 0x07 has 1 sectors [Extended self-test log]
|
|---|
| 88 | SMART Log at address 0x09 has 1 sectors [Selective self-test log]
|
|---|
| 89 | GP Log at address 0x10 has 1 sectors [NCQ Command Error]
|
|---|
| 90 | GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
|
|---|
| 91 | GP Log at address 0x21 has 1 sectors [Write stream error log]
|
|---|
| 92 | GP Log at address 0x22 has 1 sectors [Read stream error log]
|
|---|
| 93 | GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
|
|---|
| 94 | GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
|
|---|
| 95 | GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
|
|---|
| 96 | GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
|
|---|
| 97 | GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
|
|---|
| 98 | GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
|
|---|
| 99 | GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
|
|---|
| 100 | GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
|
|---|
| 101 | GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
|
|---|
| 102 | GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
|
|---|
| 103 | GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
|
|---|
| 104 | GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
|
|---|
| 105 | GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
|
|---|
| 106 | GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
|
|---|
| 107 | GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
|
|---|
| 108 | GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
|
|---|
| 109 | GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
|
|---|
| 110 | GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
|
|---|
| 111 | GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
|
|---|
| 112 | GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
|
|---|
| 113 | GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
|
|---|
| 114 | GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
|
|---|
| 115 | GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
|
|---|
| 116 | GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
|
|---|
| 117 | GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
|
|---|
| 118 | GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
|
|---|
| 119 | GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
|
|---|
| 120 | GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
|
|---|
| 121 | GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
|
|---|
| 122 | GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
|
|---|
| 123 | GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
|
|---|
| 124 | GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
|
|---|
| 125 | GP/S Log at address 0xa0 has 16 sectors [Device vendor specific log]
|
|---|
| 126 | GP/S Log at address 0xa1 has 16 sectors [Device vendor specific log]
|
|---|
| 127 | GP/S Log at address 0xa2 has 16 sectors [Device vendor specific log]
|
|---|
| 128 | GP/S Log at address 0xa3 has 16 sectors [Device vendor specific log]
|
|---|
| 129 | GP/S Log at address 0xa4 has 16 sectors [Device vendor specific log]
|
|---|
| 130 | GP/S Log at address 0xa5 has 16 sectors [Device vendor specific log]
|
|---|
| 131 | GP/S Log at address 0xa6 has 16 sectors [Device vendor specific log]
|
|---|
| 132 | GP/S Log at address 0xa7 has 16 sectors [Device vendor specific log]
|
|---|
| 133 | GP/S Log at address 0xa8 has 1 sectors [Device vendor specific log]
|
|---|
| 134 | GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log]
|
|---|
| 135 | GP/S Log at address 0xaa has 1 sectors [Device vendor specific log]
|
|---|
| 136 | GP/S Log at address 0xab has 1 sectors [Device vendor specific log]
|
|---|
| 137 | GP/S Log at address 0xac has 1 sectors [Device vendor specific log]
|
|---|
| 138 | GP/S Log at address 0xad has 1 sectors [Device vendor specific log]
|
|---|
| 139 | GP/S Log at address 0xae has 1 sectors [Device vendor specific log]
|
|---|
| 140 | GP/S Log at address 0xaf has 1 sectors [Device vendor specific log]
|
|---|
| 141 | GP/S Log at address 0xb0 has 1 sectors [Device vendor specific log]
|
|---|
| 142 | GP/S Log at address 0xb1 has 1 sectors [Device vendor specific log]
|
|---|
| 143 | GP/S Log at address 0xb2 has 1 sectors [Device vendor specific log]
|
|---|
| 144 | GP/S Log at address 0xb3 has 1 sectors [Device vendor specific log]
|
|---|
| 145 | GP/S Log at address 0xb4 has 1 sectors [Device vendor specific log]
|
|---|
| 146 | GP/S Log at address 0xb5 has 1 sectors [Device vendor specific log]
|
|---|
| 147 | GP/S Log at address 0xb6 has 1 sectors [Device vendor specific log]
|
|---|
| 148 | GP/S Log at address 0xb7 has 38 sectors [Device vendor specific log]
|
|---|
| 149 | GP/S Log at address 0xbd has 1 sectors [Device vendor specific log]
|
|---|
| 150 | GP/S Log at address 0xc0 has 1 sectors [Device vendor specific log]
|
|---|
| 151 | GP Log at address 0xc1 has 93 sectors [Device vendor specific log]
|
|---|
| 152 | GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status]
|
|---|
| 153 | GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer]
|
|---|
| 154 |
|
|---|
| 155 | SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
|
|---|
| 156 | No Errors Logged
|
|---|
| 157 |
|
|---|
| 158 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
|---|
| 159 | No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|---|
| 160 |
|
|---|
| 161 | SMART Selective self-test log data structure revision number 1
|
|---|
| 162 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 163 | 1 0 0 Not_testing
|
|---|
| 164 | 2 0 0 Not_testing
|
|---|
| 165 | 3 0 0 Not_testing
|
|---|
| 166 | 4 0 0 Not_testing
|
|---|
| 167 | 5 0 0 Not_testing
|
|---|
| 168 | Selective self-test flags (0x0):
|
|---|
| 169 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 170 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 171 |
|
|---|
| 172 | SCT Status Version: 3
|
|---|
| 173 | SCT Version (vendor specific): 258 (0x0102)
|
|---|
| 174 | SCT Support Level: 1
|
|---|
| 175 | Device State: Active (0)
|
|---|
| 176 | Current Temperature: 24 Celsius
|
|---|
| 177 | Power Cycle Min/Max Temperature: 18/27 Celsius
|
|---|
| 178 | Lifetime Min/Max Temperature: 18/28 Celsius
|
|---|
| 179 | Under/Over Temperature Limit Count: 0/0
|
|---|
| 180 | SCT Temperature History Version: 2
|
|---|
| 181 | Temperature Sampling Period: 1 minute
|
|---|
| 182 | Temperature Logging Interval: 1 minute
|
|---|
| 183 | Min/Max recommended Temperature: 0/60 Celsius
|
|---|
| 184 | Min/Max Temperature Limit: -41/85 Celsius
|
|---|
| 185 | Temperature History Size (Index): 478 (290)
|
|---|
| 186 |
|
|---|
| 187 | Index Estimated Time Temperature Celsius
|
|---|
| 188 | 291 2016-03-14 05:45 24 *****
|
|---|
| 189 | ... ..(176 skipped). .. *****
|
|---|
| 190 | 468 2016-03-14 08:42 24 *****
|
|---|
| 191 | 469 2016-03-14 08:43 23 ****
|
|---|
| 192 | ... ..( 3 skipped). .. ****
|
|---|
| 193 | 473 2016-03-14 08:47 23 ****
|
|---|
| 194 | 474 2016-03-14 08:48 24 *****
|
|---|
| 195 | ... ..(216 skipped). .. *****
|
|---|
| 196 | 213 2016-03-14 12:25 24 *****
|
|---|
| 197 | 214 2016-03-14 12:26 25 ******
|
|---|
| 198 | 215 2016-03-14 12:27 24 *****
|
|---|
| 199 | ... ..( 19 skipped). .. *****
|
|---|
| 200 | 235 2016-03-14 12:47 24 *****
|
|---|
| 201 | 236 2016-03-14 12:48 25 ******
|
|---|
| 202 | 237 2016-03-14 12:49 24 *****
|
|---|
| 203 | ... ..( 18 skipped). .. *****
|
|---|
| 204 | 256 2016-03-14 13:08 24 *****
|
|---|
| 205 | 257 2016-03-14 13:09 25 ******
|
|---|
| 206 | 258 2016-03-14 13:10 25 ******
|
|---|
| 207 | 259 2016-03-14 13:11 24 *****
|
|---|
| 208 | ... ..( 30 skipped). .. *****
|
|---|
| 209 | 290 2016-03-14 13:42 24 *****
|
|---|
| 210 |
|
|---|
| 211 | SCT Error Recovery Control:
|
|---|
| 212 | Read: 70 (7.0 seconds)
|
|---|
| 213 | Write: 70 (7.0 seconds)
|
|---|
| 214 |
|
|---|
| 215 | SATA Phy Event Counters (GP Log 0x11)
|
|---|
| 216 | ID Size Value Description
|
|---|
| 217 | 0x0001 2 0 Command failed due to ICRC error
|
|---|
| 218 | 0x0002 2 0 R_ERR response for data FIS
|
|---|
| 219 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
|---|
| 220 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
|---|
| 221 | 0x0005 2 0 R_ERR response for non-data FIS
|
|---|
| 222 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|---|
| 223 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|---|
| 224 | 0x0008 2 0 Device-to-host non-data FIS retries
|
|---|
| 225 | 0x0009 2 28 Transition from drive PhyRdy to drive PhyNRdy
|
|---|
| 226 | 0x000a 2 28 Device-to-host register FISes sent due to a COMRESET
|
|---|
| 227 | 0x000b 2 0 CRC errors within host-to-device FIS
|
|---|
| 228 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|---|
| 229 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
|---|
| 230 | 0x8000 4 30227689 Vendor specific
|
|---|
| 231 |
|
|---|
