| 1 | smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.1.18] (local build)
|
|---|
| 2 | Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: WDC WD7500AZRX-00A8LB0
|
|---|
| 6 | Firmware Version: 01.01A01
|
|---|
| 7 | User Capacity: 750,156,374,016 bytes [750 GB]
|
|---|
| 8 | Sector Sizes: 512 bytes logical, 4096 bytes physical
|
|---|
| 9 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 10 | ATA Version is: ATA8-ACS (minor revision not indicated)
|
|---|
| 11 | SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
|
|---|
| 12 | Local Time is: Mon Mar 14 13:07:43 2016 UTC
|
|---|
| 13 | SMART support is: Available - device has SMART capability.
|
|---|
| 14 | SMART support is: Enabled
|
|---|
| 15 | AAM feature is: Unavailable
|
|---|
| 16 | APM feature is: Unavailable
|
|---|
| 17 | Rd look-ahead is: Enabled
|
|---|
| 18 | Write cache is: Enabled
|
|---|
| 19 | ATA Security is: Disabled, frozen [SEC2]
|
|---|
| 20 | Wt Cache Reorder: Enabled
|
|---|
| 21 |
|
|---|
| 22 | === START OF READ SMART DATA SECTION ===
|
|---|
| 23 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 24 |
|
|---|
| 25 | General SMART Values:
|
|---|
| 26 | Offline data collection status: (0x82) Offline data collection activity
|
|---|
| 27 | was completed without error.
|
|---|
| 28 | Auto Offline Data Collection: Enabled.
|
|---|
| 29 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 30 | without error or no self-test has ever
|
|---|
| 31 | been run.
|
|---|
| 32 | Total time to complete Offline
|
|---|
| 33 | data collection: (12900) seconds.
|
|---|
| 34 | Offline data collection
|
|---|
| 35 | capabilities: (0x7b) SMART execute Offline immediate.
|
|---|
| 36 | Auto Offline data collection on/off support.
|
|---|
| 37 | Suspend Offline collection upon new
|
|---|
| 38 | command.
|
|---|
| 39 | Offline surface scan supported.
|
|---|
| 40 | Self-test supported.
|
|---|
| 41 | Conveyance Self-test supported.
|
|---|
| 42 | Selective Self-test supported.
|
|---|
| 43 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 44 | power-saving mode.
|
|---|
| 45 | Supports SMART auto save timer.
|
|---|
| 46 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 47 | General Purpose Logging supported.
|
|---|
| 48 | Short self-test routine
|
|---|
| 49 | recommended polling time: ( 2) minutes.
|
|---|
| 50 | Extended self-test routine
|
|---|
| 51 | recommended polling time: ( 142) minutes.
|
|---|
| 52 | Conveyance self-test routine
|
|---|
| 53 | recommended polling time: ( 5) minutes.
|
|---|
| 54 | SCT capabilities: (0x30b5) SCT Status supported.
|
|---|
| 55 | SCT Feature Control supported.
|
|---|
| 56 | SCT Data Table supported.
|
|---|
| 57 |
|
|---|
| 58 | SMART Attributes Data Structure revision number: 16
|
|---|
| 59 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 60 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 61 | 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
|
|---|
| 62 | 3 Spin_Up_Time POS--K 138 135 021 - 4075
|
|---|
| 63 | 4 Start_Stop_Count -O--CK 100 100 000 - 859
|
|---|
| 64 | 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
|
|---|
| 65 | 7 Seek_Error_Rate -OSR-K 100 253 000 - 0
|
|---|
| 66 | 9 Power_On_Hours -O--CK 097 097 000 - 2202
|
|---|
| 67 | 10 Spin_Retry_Count -O--CK 100 100 000 - 0
|
|---|
| 68 | 11 Calibration_Retry_Count -O--CK 100 100 000 - 0
|
|---|
| 69 | 12 Power_Cycle_Count -O--CK 100 100 000 - 855
|
|---|
| 70 | 192 Power-Off_Retract_Count -O--CK 200 200 000 - 355
|
|---|
| 71 | 193 Load_Cycle_Count -O--CK 198 198 000 - 6160
|
|---|
| 72 | 194 Temperature_Celsius -O---K 116 104 000 - 27
|
|---|
| 73 | 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
|
|---|
| 74 | 197 Current_Pending_Sector -O--CK 200 200 000 - 0
|
|---|
| 75 | 198 Offline_Uncorrectable ----CK 200 200 000 - 0
|
|---|
| 76 | 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
|
|---|
| 77 | 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
|
|---|
| 78 | ||||||_ K auto-keep
|
|---|
| 79 | |||||__ C event count
|
|---|
| 80 | ||||___ R error rate
|
|---|
| 81 | |||____ S speed/performance
|
|---|
| 82 | ||_____ O updated online
|
|---|
| 83 | |______ P prefailure warning
|
|---|
| 84 |
|
|---|
| 85 | General Purpose Log Directory Version 1
|
|---|
| 86 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 87 | Address Access R/W Size Description
|
|---|
| 88 | 0x00 GPL,SL R/O 1 Log Directory
|
|---|
| 89 | 0x01 SL R/O 1 Summary SMART error log
|
|---|
| 90 | 0x02 SL R/O 5 Comprehensive SMART error log
|
|---|
| 91 | 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
|
|---|
| 92 | 0x06 SL R/O 1 SMART self-test log
|
|---|
| 93 | 0x07 GPL R/O 1 Extended self-test log
|
|---|
| 94 | 0x09 SL R/W 1 Selective self-test log
|
|---|
| 95 | 0x10 GPL R/O 1 NCQ Command Error log
|
|---|
| 96 | 0x11 GPL R/O 1 SATA Phy Event Counters
|
|---|
| 97 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|---|
| 98 | 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
|
|---|
| 99 | 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
|
|---|
| 100 | 0xbd GPL,SL VS 1 Device vendor specific log
|
|---|
| 101 | 0xc0 GPL,SL VS 1 Device vendor specific log
|
|---|
| 102 | 0xc1 GPL VS 93 Device vendor specific log
|
|---|
| 103 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
|---|
| 104 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|---|
| 105 |
|
|---|
| 106 | SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
|
|---|
| 107 | No Errors Logged
|
|---|
| 108 |
|
|---|
| 109 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
|---|
| 110 | No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|---|
| 111 |
|
|---|
| 112 | SMART Selective self-test log data structure revision number 1
|
|---|
| 113 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 114 | 1 0 0 Not_testing
|
|---|
| 115 | 2 0 0 Not_testing
|
|---|
| 116 | 3 0 0 Not_testing
|
|---|
| 117 | 4 0 0 Not_testing
|
|---|
| 118 | 5 0 0 Not_testing
|
|---|
| 119 | Selective self-test flags (0x0):
|
|---|
| 120 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 121 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 122 |
|
|---|
| 123 | SCT Status Version: 3
|
|---|
| 124 | SCT Version (vendor specific): 258 (0x0102)
|
|---|
| 125 | SCT Support Level: 1
|
|---|
| 126 | Device State: Active (0)
|
|---|
| 127 | Current Temperature: 27 Celsius
|
|---|
| 128 | Power Cycle Min/Max Temperature: 21/27 Celsius
|
|---|
| 129 | Lifetime Min/Max Temperature: 20/39 Celsius
|
|---|
| 130 | Under/Over Temperature Limit Count: 0/0
|
|---|
| 131 | SCT Temperature History Version: 2
|
|---|
| 132 | Temperature Sampling Period: 1 minute
|
|---|
| 133 | Temperature Logging Interval: 1 minute
|
|---|
| 134 | Min/Max recommended Temperature: 0/60 Celsius
|
|---|
| 135 | Min/Max Temperature Limit: -41/85 Celsius
|
|---|
| 136 | Temperature History Size (Index): 478 (377)
|
|---|
| 137 |
|
|---|
| 138 | Index Estimated Time Temperature Celsius
|
|---|
| 139 | 378 2016-03-14 05:10 32 *************
|
|---|
| 140 | ... ..( 78 skipped). .. *************
|
|---|
| 141 | 457 2016-03-14 06:29 32 *************
|
|---|
| 142 | 458 2016-03-14 06:30 ? -
|
|---|
| 143 | 459 2016-03-14 06:31 21 **
|
|---|
| 144 | 460 2016-03-14 06:32 21 **
|
|---|
| 145 | 461 2016-03-14 06:33 21 **
|
|---|
| 146 | 462 2016-03-14 06:34 22 ***
|
|---|
| 147 | 463 2016-03-14 06:35 22 ***
|
|---|
| 148 | 464 2016-03-14 06:36 23 ****
|
|---|
| 149 | 465 2016-03-14 06:37 24 *****
|
|---|
| 150 | ... ..( 2 skipped). .. *****
|
|---|
| 151 | 468 2016-03-14 06:40 24 *****
|
|---|
| 152 | 469 2016-03-14 06:41 25 ******
|
|---|
| 153 | 470 2016-03-14 06:42 25 ******
|
|---|
| 154 | 471 2016-03-14 06:43 26 *******
|
|---|
| 155 | ... ..( 2 skipped). .. *******
|
|---|
| 156 | 474 2016-03-14 06:46 26 *******
|
|---|
| 157 | 475 2016-03-14 06:47 27 ********
|
|---|
| 158 | 476 2016-03-14 06:48 27 ********
|
|---|
| 159 | 477 2016-03-14 06:49 27 ********
|
|---|
| 160 | 0 2016-03-14 06:50 34 ***************
|
|---|
| 161 | ... ..(289 skipped). .. ***************
|
|---|
| 162 | 290 2016-03-14 11:40 34 ***************
|
|---|
| 163 | 291 2016-03-14 11:41 33 **************
|
|---|
| 164 | ... ..( 18 skipped). .. **************
|
|---|
| 165 | 310 2016-03-14 12:00 33 **************
|
|---|
| 166 | 311 2016-03-14 12:01 32 *************
|
|---|
| 167 | ... ..( 65 skipped). .. *************
|
|---|
| 168 | 377 2016-03-14 13:07 32 *************
|
|---|
| 169 |
|
|---|
| 170 | SCT Error Recovery Control command not supported
|
|---|
| 171 |
|
|---|
| 172 | Device Statistics (GP Log 0x04) not supported
|
|---|
| 173 |
|
|---|
| 174 | SATA Phy Event Counters (GP Log 0x11)
|
|---|
| 175 | ID Size Value Description
|
|---|
| 176 | 0x0001 2 0 Command failed due to ICRC error
|
|---|
| 177 | 0x0002 2 0 R_ERR response for data FIS
|
|---|
| 178 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
|---|
| 179 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
|---|
| 180 | 0x0005 2 0 R_ERR response for non-data FIS
|
|---|
| 181 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|---|
| 182 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|---|
| 183 | 0x0008 2 0 Device-to-host non-data FIS retries
|
|---|
| 184 | 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy
|
|---|
| 185 | 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
|
|---|
| 186 | 0x000b 2 0 CRC errors within host-to-device FIS
|
|---|
| 187 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|---|
| 188 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
|---|
| 189 | 0x8000 4 1101 Vendor specific
|
|---|
| 190 |
|
|---|
