1 | smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.19.3] (local build)
|
---|
2 | Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Device Model: SATA SSD
|
---|
6 | Firmware Version: S9FM01.6
|
---|
7 | User Capacity: 64,023,257,088 bytes [64.0 GB]
|
---|
8 | Sector Size: 512 bytes logical/physical
|
---|
9 | Device is: Not in smartctl database [for details use: -P showall]
|
---|
10 | ATA Version is: 10
|
---|
11 | ATA Standard is: Exact ATA specification draft version not indicated
|
---|
12 | Local Time is: Mon Mar 14 13:35:53 2016 CET
|
---|
13 | SMART support is: Available - device has SMART capability.
|
---|
14 | SMART support is: Enabled
|
---|
15 |
|
---|
16 | === START OF READ SMART DATA SECTION ===
|
---|
17 | SMART overall-health self-assessment test result: PASSED
|
---|
18 |
|
---|
19 | General SMART Values:
|
---|
20 | Offline data collection status: (0x00) Offline data collection activity
|
---|
21 | was never started.
|
---|
22 | Auto Offline Data Collection: Disabled.
|
---|
23 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
24 | without error or no self-test has ever
|
---|
25 | been run.
|
---|
26 | Total time to complete Offline
|
---|
27 | data collection: ( 30) seconds.
|
---|
28 | Offline data collection
|
---|
29 | capabilities: (0x7b) SMART execute Offline immediate.
|
---|
30 | Auto Offline data collection on/off support.
|
---|
31 | Suspend Offline collection upon new
|
---|
32 | command.
|
---|
33 | Offline surface scan supported.
|
---|
34 | Self-test supported.
|
---|
35 | Conveyance Self-test supported.
|
---|
36 | Selective Self-test supported.
|
---|
37 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
38 | power-saving mode.
|
---|
39 | Supports SMART auto save timer.
|
---|
40 | Error logging capability: (0x01) Error logging supported.
|
---|
41 | General Purpose Logging supported.
|
---|
42 | Short self-test routine
|
---|
43 | recommended polling time: ( 1) minutes.
|
---|
44 | Extended self-test routine
|
---|
45 | recommended polling time: ( 2) minutes.
|
---|
46 | Conveyance self-test routine
|
---|
47 | recommended polling time: ( 2) minutes.
|
---|
48 |
|
---|
49 | SMART Attributes Data Structure revision number: 16
|
---|
50 | Vendor Specific SMART Attributes with Thresholds:
|
---|
51 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
---|
52 | 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0
|
---|
53 | 9 Power_On_Hours -O--C- 100 100 000 - 925
|
---|
54 | 12 Power_Cycle_Count -O--C- 100 100 000 - 12
|
---|
55 | 168 Unknown_Attribute -O--C- 100 100 000 - 0
|
---|
56 | 169 Unknown_Attribute ------ 100 100 000 - 14
|
---|
57 | 170 Unknown_Attribute PO--C- 100 100 010 - 12
|
---|
58 | 173 Unknown_Attribute ------ 100 100 000 - 65536
|
---|
59 | 192 Power-Off_Retract_Count -O--C- 100 100 000 - 0
|
---|
60 | 196 Reallocated_Event_Count ------ 100 100 000 - 0
|
---|
61 | 218 Unknown_Attribute ------ 100 100 000 - 0
|
---|
62 | 231 Temperature_Celsius PO--C- 100 100 000 - 100
|
---|
63 | 233 Media_Wearout_Indicator PO--C- 100 100 000 - 13811
|
---|
64 | 241 Total_LBAs_Written -O--C- 100 100 000 - 12438
|
---|
65 | 242 Total_LBAs_Read -O--C- 100 100 000 - 3686
|
---|
66 | 246 Unknown_Attribute ------ 100 100 000 - 5019
|
---|
67 | ||||||_ K auto-keep
|
---|
68 | |||||__ C event count
|
---|
69 | ||||___ R error rate
|
---|
70 | |||____ S speed/performance
|
---|
71 | ||_____ O updated online
|
---|
72 | |______ P prefailure warning
|
---|
73 |
|
---|
74 | General Purpose Log Directory Version 1
|
---|
75 | SMART Log Directory Version 1 [multi-sector log support]
|
---|
76 | GP/S Log at address 0x00 has 1 sectors [Log Directory]
|
---|
77 | SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
|
---|
78 | SMART Log at address 0x02 has 51 sectors [Comprehensive SMART error log]
|
---|
79 | GP Log at address 0x03 has 64 sectors [Ext. Comprehensive SMART error log]
|
---|
80 | GP/S Log at address 0x04 has 8 sectors [Device Statistics]
|
---|
81 | SMART Log at address 0x06 has 1 sectors [SMART self-test log]
|
---|
82 | GP Log at address 0x07 has 1 sectors [Extended self-test log]
|
---|
83 | SMART Log at address 0x09 has 1 sectors [Selective self-test log]
|
---|
84 | GP Log at address 0x10 has 1 sectors [NCQ Command Error]
|
---|
85 | GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
|
---|
86 | GP/S Log at address 0x30 has 9 sectors [Reserved]
|
---|
87 | GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
|
---|
88 | GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
|
---|
89 | GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
|
---|
90 | GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
|
---|
91 | GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
|
---|
92 | GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
|
---|
93 | GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
|
---|
94 | GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
|
---|
95 | GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
|
---|
96 | GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
|
---|
97 | GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
|
---|
98 | GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
|
---|
99 | GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
|
---|
100 | GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
|
---|
101 | GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
|
---|
102 | GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
|
---|
103 | GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
|
---|
104 | GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
|
---|
105 | GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
|
---|
106 | GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
|
---|
107 | GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
|
---|
108 | GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
|
---|
109 | GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
|
---|
110 | GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
|
---|
111 | GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
|
---|
112 | GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
|
---|
113 | GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
|
---|
114 | GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
|
---|
115 | GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
|
---|
116 | GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
|
---|
117 | GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
|
---|
118 | GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
|
---|
119 |
|
---|
120 | SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
---|
121 | No Errors Logged
|
---|
122 |
|
---|
123 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
---|
124 | No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
---|
125 |
|
---|
126 | Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
|
---|
127 | SMART Selective self-test log data structure revision number 0
|
---|
128 | Note: revision number not 1 implies that no selective self-test has ever been run
|
---|
129 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
130 | 1 0 0 Not_testing
|
---|
131 | 2 0 0 Not_testing
|
---|
132 | 3 0 0 Not_testing
|
---|
133 | 4 0 0 Not_testing
|
---|
134 | 5 0 0 Not_testing
|
---|
135 | Selective self-test flags (0x0):
|
---|
136 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
137 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
138 |
|
---|
139 | Warning: device does not support SCT Commands
|
---|
140 | SATA Phy Event Counters (GP Log 0x11)
|
---|
141 | ID Size Value Description
|
---|
142 | 0x0001 2 0 Command failed due to ICRC error
|
---|
143 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
---|
144 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
---|
145 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
---|
146 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
---|
147 | 0x0008 2 0 Device-to-host non-data FIS retries
|
---|
148 | 0x0009 4 28 Transition from drive PhyRdy to drive PhyNRdy
|
---|
149 | 0x000a 4 29 Device-to-host register FISes sent due to a COMRESET
|
---|
150 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
---|
151 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
---|
152 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
---|
153 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
---|
154 |
|
---|