Ticket #661: smartctl-Samsung-SSD-PM863.txt

File smartctl-Samsung-SSD-PM863.txt, 9.6 KB (added by xciv, 4 years ago)

smartctl Samsung SSD PM863

Line 
1smartctl 5.43 2012-06-30 r3573 [x86_64-linux-2.6.32-573.18.1.el6.x86_64] (local build)
2Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
3
4=== START OF INFORMATION SECTION ===
5Device Model:     SAMSUNG MZ7LM960HCHP-0E003
6Firmware Version: GXT3003Q
7User Capacity:    960,197,124,096 bytes [960 GB]
8Sector Size:      512 bytes logical/physical
9Device is:        Not in smartctl database [for details use: -P showall]
10ATA Version is:   8
11ATA Standard is:  ATA-8-ACS revision 4c
12Local Time is:    Mon Feb 29 16:56:34 2016 GMT
13SMART support is: Available - device has SMART capability.
14SMART support is: Enabled
15AAM feature is:   Unavailable
16APM feature is:   Unavailable
17Rd look-ahead is: Enabled
18Write cache is:   Disabled
19ATA Security is:  Disabled, NOT FROZEN [SEC1]
20
21=== START OF READ SMART DATA SECTION ===
22SMART STATUS RETURN: incomplete response, ATA output registers missing
23SMART overall-health self-assessment test result: PASSED
24Warning: This result is based on an Attribute check.
25
26General SMART Values:
27Offline data collection status:  (0x02) Offline data collection activity
28                                        was completed without error.
29                                        Auto Offline Data Collection: Disabled.
30Self-test execution status:      (   0) The previous self-test routine completed
31                                        without error or no self-test has ever
32                                        been run.
33Total time to complete Offline
34data collection:                ( 3600) seconds.
35Offline data collection
36capabilities:                    (0x53) SMART execute Offline immediate.
37                                        Auto Offline data collection on/off support.
38                                        Suspend Offline collection upon new
39                                        command.
40                                        No Offline surface scan supported.
41                                        Self-test supported.
42                                        No Conveyance Self-test supported.
43                                        Selective Self-test supported.
44SMART capabilities:            (0x0003) Saves SMART data before entering
45                                        power-saving mode.
46                                        Supports SMART auto save timer.
47Error logging capability:        (0x01) Error logging supported.
48                                        General Purpose Logging supported.
49Short self-test routine
50recommended polling time:        (   2) minutes.
51Extended self-test routine
52recommended polling time:        (  60) minutes.
53SCT capabilities:              (0x003d) SCT Status supported.
54                                        SCT Error Recovery Control supported.
55                                        SCT Feature Control supported.
56                                        SCT Data Table supported.
57
58SMART Attributes Data Structure revision number: 1
59Vendor Specific SMART Attributes with Thresholds:
60ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
61  5 Reallocated_Sector_Ct   PO--CK   100   100   010    -    0
62  9 Power_On_Hours          -O--CK   099   099   000    -    42
63 12 Power_Cycle_Count       -O--CK   099   099   000    -    17
64177 Wear_Leveling_Count     PO--C-   099   099   005    -    3
65179 Used_Rsvd_Blk_Cnt_Tot   PO--C-   100   100   010    -    0
66180 Unused_Rsvd_Blk_Cnt_Tot PO--C-   100   100   010    -    4948
67181 Program_Fail_Cnt_Total  -O--CK   100   100   010    -    0
68182 Erase_Fail_Count_Total  -O--CK   100   100   010    -    0
69183 Runtime_Bad_Block       PO--C-   100   100   010    -    0
70184 End-to-End_Error        PO--CK   100   100   097    -    0
71187 Reported_Uncorrect      -O--CK   100   100   000    -    0
72190 Airflow_Temperature_Cel -O--CK   065   056   000    -    35
73195 Hardware_ECC_Recovered  -O-RC-   200   200   000    -    0
74197 Current_Pending_Sector  -O--CK   100   100   000    -    0
75199 UDMA_CRC_Error_Count    -OSRCK   100   100   000    -    0
76202 Data_Address_Mark_Errs  PO--CK   100   100   010    -    0
77235 Unknown_Attribute       -O--C-   099   099   000    -    11
78241 Total_LBAs_Written      -O--CK   099   099   000    -    5993157475
79242 Total_LBAs_Read         -O--CK   099   099   000    -    1256859
80243 Unknown_Attribute       -O--CK   100   100   000    -    0
81244 Unknown_Attribute       -O--CK   100   100   000    -    0
82245 Unknown_Attribute       -O--CK   100   100   000    -    65535
83246 Unknown_Attribute       -O--CK   100   100   000    -    65535
84247 Unknown_Attribute       -O--CK   100   100   000    -    65535
85251 Unknown_Attribute       -O--CK   100   100   000    -    7494655312
86                            ||||||_ K auto-keep
87                            |||||__ C event count
88                            ||||___ R error rate
89                            |||____ S speed/performance
90                            ||_____ O updated online
91                            |______ P prefailure warning
92
93General Purpose Log Directory Version 1
94SMART           Log Directory Version 1 [multi-sector log support]
95GP/S  Log at address 0x00 has    1 sectors [Log Directory]
96SMART Log at address 0x01 has    1 sectors [Summary SMART error log]
97SMART Log at address 0x02 has    1 sectors [Comprehensive SMART error log]
98GP    Log at address 0x03 has    1 sectors [Ext. Comprehensive SMART error log]
99SMART Log at address 0x06 has    1 sectors [SMART self-test log]
100GP    Log at address 0x07 has    1 sectors [Extended self-test log]
101SMART Log at address 0x09 has    1 sectors [Selective self-test log]
102GP    Log at address 0x10 has    1 sectors [NCQ Command Error log]
103GP    Log at address 0x11 has    1 sectors [SATA Phy Event Counters]
104GP    Log at address 0x13 has    1 sectors [SATA NCQ Send and Receive log]
105GP/S  Log at address 0x30 has    9 sectors [IDENTIFY DEVICE data log]
106GP/S  Log at address 0x80 has   16 sectors [Host vendor specific log]
107GP/S  Log at address 0x81 has   16 sectors [Host vendor specific log]
108GP/S  Log at address 0x82 has   16 sectors [Host vendor specific log]
109GP/S  Log at address 0x83 has   16 sectors [Host vendor specific log]
110GP/S  Log at address 0x84 has   16 sectors [Host vendor specific log]
111GP/S  Log at address 0x85 has   16 sectors [Host vendor specific log]
112GP/S  Log at address 0x86 has   16 sectors [Host vendor specific log]
113GP/S  Log at address 0x87 has   16 sectors [Host vendor specific log]
114GP/S  Log at address 0x88 has   16 sectors [Host vendor specific log]
115GP/S  Log at address 0x89 has   16 sectors [Host vendor specific log]
116GP/S  Log at address 0x8a has   16 sectors [Host vendor specific log]
117GP/S  Log at address 0x8b has   16 sectors [Host vendor specific log]
118GP/S  Log at address 0x8c has   16 sectors [Host vendor specific log]
119GP/S  Log at address 0x8d has   16 sectors [Host vendor specific log]
120GP/S  Log at address 0x8e has   16 sectors [Host vendor specific log]
121GP/S  Log at address 0x8f has   16 sectors [Host vendor specific log]
122GP/S  Log at address 0x90 has   16 sectors [Host vendor specific log]
123GP/S  Log at address 0x91 has   16 sectors [Host vendor specific log]
124GP/S  Log at address 0x92 has   16 sectors [Host vendor specific log]
125GP/S  Log at address 0x93 has   16 sectors [Host vendor specific log]
126GP/S  Log at address 0x94 has   16 sectors [Host vendor specific log]
127GP/S  Log at address 0x95 has   16 sectors [Host vendor specific log]
128GP/S  Log at address 0x96 has   16 sectors [Host vendor specific log]
129GP/S  Log at address 0x97 has   16 sectors [Host vendor specific log]
130GP/S  Log at address 0x98 has   16 sectors [Host vendor specific log]
131GP/S  Log at address 0x99 has   16 sectors [Host vendor specific log]
132GP/S  Log at address 0x9a has   16 sectors [Host vendor specific log]
133GP/S  Log at address 0x9b has   16 sectors [Host vendor specific log]
134GP/S  Log at address 0x9c has   16 sectors [Host vendor specific log]
135GP/S  Log at address 0x9d has   16 sectors [Host vendor specific log]
136GP/S  Log at address 0x9e has   16 sectors [Host vendor specific log]
137GP/S  Log at address 0x9f has   16 sectors [Host vendor specific log]
138GP/S  Log at address 0xe0 has    1 sectors [SCT Command/Status]
139GP/S  Log at address 0xe1 has    1 sectors [SCT Data Transfer]
140
141SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
142No Errors Logged
143
144SMART Extended Self-test Log Version: 1 (1 sectors)
145Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
146# 1  Short offline       Completed without error       00%        42         -
147
148SMART Selective self-test log data structure revision number 1
149 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
150    1        0        0  Not_testing
151    2        0        0  Not_testing
152    3        0        0  Not_testing
153    4        0        0  Not_testing
154    5        0        0  Not_testing
155  255        0    65535  Read_scanning was completed without error
156Selective self-test flags (0x0):
157  After scanning selected spans, do NOT read-scan remainder of disk.
158If Selective self-test is pending on power-up, resume after 0 minute delay.
159
160Error unknown SCT Temperature History Format Version (3), should be 2.
161Error SMART WRITE LOG does not return COUNT and LBA_LOW register
162Warning: device does not support SCT (Get) Error Recovery Control command
163
164SATA Phy Event Counters (GP Log 0x11)
165ID      Size     Value  Description
1660x0001  2            0  Command failed due to ICRC error
1670x0002  2            0  R_ERR response for data FIS
1680x0003  2            0  R_ERR response for device-to-host data FIS
1690x0004  2            0  R_ERR response for host-to-device data FIS
1700x0005  2            0  R_ERR response for non-data FIS
1710x0006  2            0  R_ERR response for device-to-host non-data FIS
1720x0007  2            0  R_ERR response for host-to-device non-data FIS
1730x0008  2            0  Device-to-host non-data FIS retries
1740x0009  2            3  Transition from drive PhyRdy to drive PhyNRdy
1750x000a  2            3  Device-to-host register FISes sent due to a COMRESET
1760x000b  2            0  CRC errors within host-to-device FIS
1770x000d  2            0  Non-CRC errors within host-to-device FIS
1780x000f  2            0  R_ERR response for host-to-device data FIS, CRC
1790x0010  2            0  R_ERR response for host-to-device data FIS, non-CRC
1800x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
1810x0013  2            0  R_ERR response for host-to-device non-data FIS, non-CRC
182