1 | smartctl 6.5 2016-01-23 r4210 [Darwin 12.6.0 x86_64] (daily-20160123) |
---|
2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org |
---|
3 | |
---|
4 | === START OF INFORMATION SECTION === |
---|
5 | Device Model: Corsair CMFSSD-128D1 |
---|
6 | Serial Number: 84004582W73A67JPWCYN |
---|
7 | Firmware Version: 1.0 |
---|
8 | User Capacity: 128,035,676,160 bytes [128 GB] |
---|
9 | Sector Size: 512 bytes logical/physical |
---|
10 | Rotation Rate: Solid State Device |
---|
11 | Device is: Not in smartctl database [for details use: -P showall] |
---|
12 | ATA Version is: ATA/ATAPI-7 (minor revision not indicated) |
---|
13 | Local Time is: Sun Jan 24 09:33:33 2016 PST |
---|
14 | SMART support is: Available - device has SMART capability. |
---|
15 | SMART support is: Enabled |
---|
16 | AAM feature is: Unavailable |
---|
17 | APM feature is: Unavailable |
---|
18 | Rd look-ahead is: Enabled |
---|
19 | Write cache is: Enabled |
---|
20 | ATA Security is: Disabled, NOT FROZEN [SEC1] |
---|
21 | Wt Cache Reorder: Unavailable |
---|
22 | |
---|
23 | === START OF READ SMART DATA SECTION === |
---|
24 | SMART overall-health self-assessment test result: PASSED |
---|
25 | |
---|
26 | General SMART Values: |
---|
27 | Offline data collection status: (0x00) Offline data collection activity |
---|
28 | was never started. |
---|
29 | Auto Offline Data Collection: Disabled. |
---|
30 | Self-test execution status: ( 240) Self-test routine in progress... |
---|
31 | 00% of test remaining. |
---|
32 | Total time to complete Offline |
---|
33 | data collection: ( 0) seconds. |
---|
34 | Offline data collection |
---|
35 | capabilities: (0x1d) SMART execute Offline immediate. |
---|
36 | No Auto Offline data collection support. |
---|
37 | Abort Offline collection upon new |
---|
38 | command. |
---|
39 | Offline surface scan supported. |
---|
40 | Self-test supported. |
---|
41 | No Conveyance Self-test supported. |
---|
42 | No Selective Self-test supported. |
---|
43 | SMART capabilities: (0x0003) Saves SMART data before entering |
---|
44 | power-saving mode. |
---|
45 | Supports SMART auto save timer. |
---|
46 | Error logging capability: (0x00) Error logging NOT supported. |
---|
47 | General Purpose Logging supported. |
---|
48 | Short self-test routine |
---|
49 | recommended polling time: ( 0) minutes. |
---|
50 | Extended self-test routine |
---|
51 | recommended polling time: ( 0) minutes. |
---|
52 | |
---|
53 | SMART Attributes Data Structure revision number: 16 |
---|
54 | Vendor Specific SMART Attributes with Thresholds: |
---|
55 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE |
---|
56 | 1 Raw_Read_Error_Rate ------ 006 000 000 - 0 |
---|
57 | 9 Power_On_Hours ------ 034 008 000 - 0 |
---|
58 | 12 Power_Cycle_Count ------ 224 008 000 - 0 |
---|
59 | 184 End-to-End_Error ------ 061 000 000 - 0 |
---|
60 | 195 Hardware_ECC_Recovered ------ 003 000 000 - 0 |
---|
61 | 196 Reallocated_Event_Count ------ 000 000 000 - 0 |
---|
62 | 197 Current_Pending_Sector ------ 000 000 000 - 0 |
---|
63 | 198 Offline_Uncorrectable ------ 072 108 000 - 23125 |
---|
64 | 199 UDMA_CRC_Error_Count ------ 255 176 000 - 119578 |
---|
65 | 200 Unknown_SSD_Attribute ------ 220 098 000 - 344 |
---|
66 | 201 Unknown_SSD_Attribute ------ 056 082 000 - 937 |
---|
67 | 202 Unknown_SSD_Attribute ------ 001 107 000 - 23 |
---|
68 | 203 Run_Out_Cancel ------ 105 072 000 - 18 |
---|
69 | 204 Soft_ECC_Correction ------ 000 000 000 - 0 |
---|
70 | 205 Thermal_Asperity_Rate ------ 160 134 000 - 1 |
---|
71 | 206 Unknown_SSD_Attribute ------ 001 000 000 - 0 |
---|
72 | 207 Unknown_SSD_Attribute ------ 129 044 000 - 0 |
---|
73 | 208 Unknown_SSD_Attribute ------ 156 002 000 - 0 |
---|
74 | 209 Unknown_SSD_Attribute ------ 100 000 000 - 0 |
---|
75 | 210 Unknown_Attribute ------ 238 000 000 - 0 |
---|
76 | 211 Unknown_Attribute ------ 000 000 000 - 0 |
---|
77 | ||||||_ K auto-keep |
---|
78 | |||||__ C event count |
---|
79 | ||||___ R error rate |
---|
80 | |||____ S speed/performance |
---|
81 | ||_____ O updated online |
---|
82 | |______ P prefailure warning |
---|
83 | |
---|
84 | ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented |
---|
85 | Read GP Log Directory failed |
---|
86 | |
---|
87 | SMART Log Directory Version 1 [multi-sector log support] |
---|
88 | Address Access R/W Size Description |
---|
89 | 0x00 SL R/O 1 Log Directory |
---|
90 | 0x01 SL R/O 1 Summary SMART error log |
---|
91 | 0x02 SL R/O 51 Comprehensive SMART error log |
---|
92 | 0x03 SL R/O 77 Ext. Comprehensive SMART error log |
---|
93 | 0x06 SL R/O 1 SMART self-test log |
---|
94 | 0x07 SL R/O 1 Extended self-test log |
---|
95 | 0x09 SL R/W 1 Selective self-test log |
---|
96 | 0x10 SL R/O 1 SATA NCQ Queued Error log |
---|
97 | 0x11 SL R/O 1 SATA Phy Event Counters log |
---|
98 | |
---|
99 | SMART Extended Comprehensive Error Log (GP Log 0x03) not supported |
---|
100 | |
---|
101 | Warning! SMART ATA Error Log Structure error: invalid SMART checksum. |
---|
102 | SMART Error Log Version: 1 |
---|
103 | No Errors Logged |
---|
104 | |
---|
105 | SMART Extended Self-test Log (GP Log 0x07) not supported |
---|
106 | |
---|
107 | Warning! SMART Self-Test Log Structure error: invalid SMART checksum. |
---|
108 | SMART Self-test log structure revision number 1 |
---|
109 | No self-tests have been logged. [To run self-tests, use: smartctl -t] |
---|
110 | |
---|
111 | Selective Self-tests/Logging not supported |
---|
112 | |
---|
113 | SCT Commands not supported |
---|
114 | |
---|
115 | Device Statistics (GP/SMART Log 0x04) not supported |
---|
116 | |
---|
117 | ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented |
---|
118 | Read SATA Phy Event Counters failed |
---|
119 | |
---|