1 | smartctl 6.4 2014-10-07 r4002 [x86_64-linux-4.2.0-16-generic] (local build)
|
---|
2 | Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Model Family: Seagate Momentus 7200.5
|
---|
6 | Device Model: ST9500423AS
|
---|
7 | Serial Number: S2V0GPC3
|
---|
8 | LU WWN Device Id: 5 000c50 05b4b897e
|
---|
9 | Firmware Version: 0005DEM1
|
---|
10 | User Capacity: 500,107,862,016 bytes [500 GB]
|
---|
11 | Sector Sizes: 512 bytes logical, 4096 bytes physical
|
---|
12 | Rotation Rate: 7200 rpm
|
---|
13 | Device is: In smartctl database [for details use: -P show]
|
---|
14 | ATA Version is: ATA8-ACS T13/1699-D revision 4
|
---|
15 | SATA Version is: SATA 2.6, 3.0 Gb/s
|
---|
16 | Local Time is: Tue Jan 19 18:55:11 2016 UTC
|
---|
17 | SMART support is: Available - device has SMART capability.
|
---|
18 | SMART support is: Enabled
|
---|
19 | AAM feature is: Unavailable
|
---|
20 | APM level is: 128 (minimum power consumption without standby)
|
---|
21 | Rd look-ahead is: Enabled
|
---|
22 | Write cache is: Enabled
|
---|
23 | ATA Security is: ENABLED, PW level MAX, **LOCKED** [SEC4]
|
---|
24 | Write SCT (Get) Feature Control Command failed: scsi error badly formed scsi parameters
|
---|
25 | Wt Cache Reorder: Unknown (SCT Feature Control command failed)
|
---|
26 |
|
---|
27 | === START OF READ SMART DATA SECTION ===
|
---|
28 | SMART overall-health self-assessment test result: PASSED
|
---|
29 | See vendor-specific Attribute list for marginal Attributes.
|
---|
30 |
|
---|
31 | General SMART Values:
|
---|
32 | Offline data collection status: (0x00) Offline data collection activity
|
---|
33 | was never started.
|
---|
34 | Auto Offline Data Collection: Disabled.
|
---|
35 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
36 | without error or no self-test has ever
|
---|
37 | been run.
|
---|
38 | Total time to complete Offline
|
---|
39 | data collection: ( 0) seconds.
|
---|
40 | Offline data collection
|
---|
41 | capabilities: (0x73) SMART execute Offline immediate.
|
---|
42 | Auto Offline data collection on/off support.
|
---|
43 | Suspend Offline collection upon new
|
---|
44 | command.
|
---|
45 | No Offline surface scan supported.
|
---|
46 | Self-test supported.
|
---|
47 | Conveyance Self-test supported.
|
---|
48 | Selective Self-test supported.
|
---|
49 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
50 | power-saving mode.
|
---|
51 | Supports SMART auto save timer.
|
---|
52 | Error logging capability: (0x01) Error logging supported.
|
---|
53 | General Purpose Logging supported.
|
---|
54 | Short self-test routine
|
---|
55 | recommended polling time: ( 2) minutes.
|
---|
56 | Extended self-test routine
|
---|
57 | recommended polling time: ( 105) minutes.
|
---|
58 | Conveyance self-test routine
|
---|
59 | recommended polling time: ( 3) minutes.
|
---|
60 | SCT capabilities: (0x303f) SCT Status supported.
|
---|
61 | SCT Error Recovery Control supported.
|
---|
62 | SCT Feature Control supported.
|
---|
63 | SCT Data Table supported.
|
---|
64 |
|
---|
65 | SMART Attributes Data Structure revision number: 10
|
---|
66 | Vendor Specific SMART Attributes with Thresholds:
|
---|
67 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
---|
68 | 1 Raw_Read_Error_Rate POSR-- 117 099 006 - 162459160
|
---|
69 | 3 Spin_Up_Time PO---- 098 098 085 - 0
|
---|
70 | 4 Start_Stop_Count -O--CK 100 100 020 - 863
|
---|
71 | 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
|
---|
72 | 7 Seek_Error_Rate POSR-- 078 060 030 - 81448433
|
---|
73 | 9 Power_On_Hours -O--CK 089 089 000 - 9947
|
---|
74 | 10 Spin_Retry_Count PO--C- 100 100 097 - 0
|
---|
75 | 12 Power_Cycle_Count -O--CK 100 100 020 - 857
|
---|
76 | 184 End-to-End_Error -O--CK 100 100 099 - 0
|
---|
77 | 187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
---|
78 | 188 Command_Timeout -O--CK 100 099 000 - 1
|
---|
79 | 189 High_Fly_Writes -O-RCK 100 100 000 - 0
|
---|
80 | 190 Airflow_Temperature_Cel -O---K 065 040 045 Past 35 (1 153 35 35 0)
|
---|
81 | 191 G-Sense_Error_Rate -O--CK 100 100 000 - 37
|
---|
82 | 192 Power-Off_Retract_Count -O--CK 100 100 000 - 180
|
---|
83 | 193 Load_Cycle_Count -O--CK 099 099 000 - 2172
|
---|
84 | 194 Temperature_Celsius -O---K 035 060 000 - 35 (0 14 0 0 0)
|
---|
85 | 195 Hardware_ECC_Recovered -O-RC- 117 099 000 - 162459160
|
---|
86 | 197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
---|
87 | 198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
---|
88 | 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
|
---|
89 | 240 Head_Flying_Hours ------ 100 253 000 - 9939 (34 215 0)
|
---|
90 | 241 Total_LBAs_Written ------ 100 253 000 - 3074563975
|
---|
91 | 242 Total_LBAs_Read ------ 100 253 000 - 1538229939
|
---|
92 | 254 Free_Fall_Sensor -O--CK 001 001 000 - 113
|
---|
93 | ||||||_ K auto-keep
|
---|
94 | |||||__ C event count
|
---|
95 | ||||___ R error rate
|
---|
96 | |||____ S speed/performance
|
---|
97 | ||_____ O updated online
|
---|
98 | |______ P prefailure warning
|
---|
99 |
|
---|
100 | General Purpose Log Directory Version 1
|
---|
101 | SMART Log Directory Version 1 [multi-sector log support]
|
---|
102 | Address Access R/W Size Description
|
---|
103 | 0x00 GPL,SL R/O 1 Log Directory
|
---|
104 | 0x01 GPL,SL R/O 1 Summary SMART error log
|
---|
105 | 0x02 GPL,SL R/O 5 Comprehensive SMART error log
|
---|
106 | 0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
---|
107 | 0x06 GPL,SL R/O 1 SMART self-test log
|
---|
108 | 0x07 GPL R/O 1 Extended self-test log
|
---|
109 | 0x09 GPL,SL R/W 1 Selective self-test log
|
---|
110 | 0x10 GPL R/O 1 SATA NCQ Queued Error log
|
---|
111 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
---|
112 | 0x21 GPL R/O 1 Write stream error log
|
---|
113 | 0x22 GPL R/O 1 Read stream error log
|
---|
114 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
---|
115 | 0xa1 GPL,SL VS 20 Device vendor specific log
|
---|
116 | 0xa2 GPL VS 2248 Device vendor specific log
|
---|
117 | 0xa8 GPL,SL VS 65 Device vendor specific log
|
---|
118 | 0xa9 GPL,SL VS 1 Device vendor specific log
|
---|
119 | 0xab GPL VS 1 Device vendor specific log
|
---|
120 | 0xae GPL VS 1 Device vendor specific log
|
---|
121 | 0xb0 GPL VS 2864 Device vendor specific log
|
---|
122 | 0xbd GPL VS 252 Device vendor specific log
|
---|
123 | 0xbe-0xbf GPL VS 65535 Device vendor specific log
|
---|
124 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
---|
125 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
---|
126 |
|
---|
127 | SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
---|
128 | No Errors Logged
|
---|
129 |
|
---|
130 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
---|
131 | No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
---|
132 |
|
---|
133 | SMART Selective self-test log data structure revision number 1
|
---|
134 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
135 | 1 0 0 Not_testing
|
---|
136 | 2 0 0 Not_testing
|
---|
137 | 3 0 0 Not_testing
|
---|
138 | 4 0 0 Not_testing
|
---|
139 | 5 0 0 Not_testing
|
---|
140 | Selective self-test flags (0x0):
|
---|
141 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
142 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
143 |
|
---|
144 | SCT Status Version: 3
|
---|
145 | SCT Version (vendor specific): 522 (0x020a)
|
---|
146 | SCT Support Level: 1
|
---|
147 | Device State: Active (0)
|
---|
148 | Current Temperature: 35 Celsius
|
---|
149 | Power Cycle Min/Max Temperature: 35/35 Celsius
|
---|
150 | Lifetime Min/Max Temperature: 14/58 Celsius
|
---|
151 | Lifetime Average Temperature: 41 Celsius
|
---|
152 | Under/Over Temperature Limit Count: 0/0
|
---|
153 |
|
---|
154 | Write SCT Data Table failed: scsi error badly formed scsi parameters
|
---|
155 | Read SCT Temperature History failed
|
---|
156 |
|
---|
157 | Write SCT (Get) Error Recovery Control Command failed: scsi error badly formed scsi parameters
|
---|
158 | SCT (Get) Error Recovery Control command failed
|
---|
159 |
|
---|
160 | Device Statistics (GP/SMART Log 0x04) not supported
|
---|
161 |
|
---|
162 | SATA Phy Event Counters (GP Log 0x11)
|
---|
163 | ID Size Value Description
|
---|
164 | 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
|
---|
165 | 0x0001 2 0 Command failed due to ICRC error
|
---|
166 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
---|
167 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
---|
168 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
---|
169 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
---|
170 |
|
---|