| 1 | Script started on Sat Sep 19 20:38:20 2015
|
|---|
| 2 | # smartctl -a /dev/sdb
|
|---|
| 3 | smartctl 6.5 2015-09-04 r4127 [x86_64-linux-4.1.6-100.fc21.x86_64] (local build)
|
|---|
| 4 | Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 5 |
|
|---|
| 6 | === START OF INFORMATION SECTION ===
|
|---|
| 7 | Model Family: Toshiba 3.5" MD04ACA... Enterprise HDD
|
|---|
| 8 | Device Model: TOSHIBA MD04ACA500
|
|---|
| 9 | Serial Number: 7594K60LFS9A
|
|---|
| 10 | LU WWN Device Id: 5 000039 66b880dd1
|
|---|
| 11 | Firmware Version: FP2A
|
|---|
| 12 | User Capacity: 5,000,981,078,016 bytes [5.00 TB]
|
|---|
| 13 | Sector Sizes: 512 bytes logical, 4096 bytes physical
|
|---|
| 14 | Rotation Rate: 7200 rpm
|
|---|
| 15 | Form Factor: 3.5 inches
|
|---|
| 16 | Device is: In smartctl database [for details use: -P show]
|
|---|
| 17 | ATA Version is: ATA8-ACS (minor revision not indicated)
|
|---|
| 18 | SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
|
|---|
| 19 | Local Time is: Sat Sep 19 20:38:33 2015 EDT
|
|---|
| 20 | SMART support is: Available - device has SMART capability.
|
|---|
| 21 | SMART support is: Enabled
|
|---|
| 22 |
|
|---|
| 23 | === START OF READ SMART DATA SECTION ===
|
|---|
| 24 | SMART Status command failed
|
|---|
| 25 | Please get assistance from http://www.smartmontools.org/
|
|---|
| 26 | Register values returned from SMART Status command are:
|
|---|
| 27 | ERR=0x00, SC=0x00, LL=0x00, LM=0x00, LH=0x00, DEV=0x00, STS=0x00
|
|---|
| 28 | SMART Status not supported: Invalid ATA output register values
|
|---|
| 29 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 30 | Warning: This result is based on an Attribute check.
|
|---|
| 31 |
|
|---|
| 32 | General SMART Values:
|
|---|
| 33 | Offline data collection status: (0x80) Offline data collection activity
|
|---|
| 34 | was never started.
|
|---|
| 35 | Auto Offline Data Collection: Enabled.
|
|---|
| 36 | Self-test execution status: ( 25) The self-test routine was aborted by
|
|---|
| 37 | the host.
|
|---|
| 38 | Total time to complete Offline
|
|---|
| 39 | data collection: ( 120) seconds.
|
|---|
| 40 | Offline data collection
|
|---|
| 41 | capabilities: (0x5b) SMART execute Offline immediate.
|
|---|
| 42 | Auto Offline data collection on/off support.
|
|---|
| 43 | Suspend Offline collection upon new
|
|---|
| 44 | command.
|
|---|
| 45 | Offline surface scan supported.
|
|---|
| 46 | Self-test supported.
|
|---|
| 47 | No Conveyance Self-test supported.
|
|---|
| 48 | Selective Self-test supported.
|
|---|
| 49 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 50 | power-saving mode.
|
|---|
| 51 | Supports SMART auto save timer.
|
|---|
| 52 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 53 | General Purpose Logging supported.
|
|---|
| 54 | Short self-test routine
|
|---|
| 55 | recommended polling time: ( 2) minutes.
|
|---|
| 56 | Extended self-test routine
|
|---|
| 57 | recommended polling time: ( 553) minutes.
|
|---|
| 58 | SCT capabilities: (0x003d) SCT Status supported.
|
|---|
| 59 | SCT Error Recovery Control supported.
|
|---|
| 60 | SCT Feature Control supported.
|
|---|
| 61 | SCT Data Table supported.
|
|---|
| 62 |
|
|---|
| 63 | SMART Attributes Data Structure revision number: 16
|
|---|
| 64 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 65 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|---|
| 66 | 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
|
|---|
| 67 | 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
|
|---|
| 68 | 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 6660
|
|---|
| 69 | 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 8
|
|---|
| 70 | 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0
|
|---|
| 71 | 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
|
|---|
| 72 | 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
|
|---|
| 73 | 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 3
|
|---|
| 74 | 10 Spin_Retry_Count 0x0033 100 100 030 Pre-fail Always - 0
|
|---|
| 75 | 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 5
|
|---|
| 76 | 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 77 | 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 3
|
|---|
| 78 | 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 8
|
|---|
| 79 | 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 49 (Min/Max 28/55)
|
|---|
| 80 | 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 81 | 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 82 | 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
|
|---|
| 83 | 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0
|
|---|
| 84 | 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 0
|
|---|
| 85 | 222 Loaded_Hours 0x0032 100 100 000 Old_age Always - 2
|
|---|
| 86 | 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 87 | 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
|
|---|
| 88 | 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 199
|
|---|
| 89 | 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
|
|---|
| 90 |
|
|---|
| 91 | SMART Error Log Version: 1
|
|---|
| 92 | No Errors Logged
|
|---|
| 93 |
|
|---|
| 94 | SMART Self-test log structure revision number 1
|
|---|
| 95 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 96 | # 1 Extended offline Aborted by host 90% 2 -
|
|---|
| 97 | # 2 Extended captive Interrupted (host reset) 90% 1 -
|
|---|
| 98 | # 3 Extended offline Aborted by host 90% 1 -
|
|---|
| 99 | # 4 Extended offline Aborted by host 90% 1 -
|
|---|
| 100 | # 5 Short offline Completed without error 00% 0 -
|
|---|
| 101 |
|
|---|
| 102 | SMART Selective self-test log data structure revision number 1
|
|---|
| 103 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 104 | 1 0 0 Not_testing
|
|---|
| 105 | 2 0 0 Not_testing
|
|---|
| 106 | 3 0 0 Not_testing
|
|---|
| 107 | 4 0 0 Not_testing
|
|---|
| 108 | 5 0 0 Not_testing
|
|---|
| 109 | Selective self-test flags (0x0):
|
|---|
| 110 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 111 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 112 |
|
|---|
| 113 | # exit
|
|---|
| 114 |
|
|---|
| 115 | Script done on Sat Sep 19 20:38:51 2015
|
|---|
