1 | smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.1.2-2-ARCH] (local build)
|
---|
2 | Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Device Model: CT250BX100SSD1
|
---|
6 | Firmware Version: MU02
|
---|
7 | User Capacity: 250,059,350,016 bytes [250 GB]
|
---|
8 | Sector Size: 512 bytes logical/physical
|
---|
9 | Rotation Rate: Solid State Device
|
---|
10 | Device is: Not in smartctl database [for details use: -P showall]
|
---|
11 | ATA Version is: ACS-2 (minor revision not indicated)
|
---|
12 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s)
|
---|
13 | Local Time is: Tue Jul 28 21:24:49 2015 WEST
|
---|
14 | SMART support is: Available - device has SMART capability.
|
---|
15 | SMART support is: Enabled
|
---|
16 | AAM feature is: Unavailable
|
---|
17 | APM feature is: Unavailable
|
---|
18 | Rd look-ahead is: Enabled
|
---|
19 | Write cache is: Enabled
|
---|
20 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
---|
21 | Write SCT (Get) Feature Control Command failed: scsi error badly formed scsi parameters
|
---|
22 | Wt Cache Reorder: Unknown (SCT Feature Control command failed)
|
---|
23 |
|
---|
24 | === START OF READ SMART DATA SECTION ===
|
---|
25 | SMART overall-health self-assessment test result: PASSED
|
---|
26 |
|
---|
27 | General SMART Values:
|
---|
28 | Offline data collection status: (0x02) Offline data collection activity
|
---|
29 | was completed without error.
|
---|
30 | Auto Offline Data Collection: Disabled.
|
---|
31 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
32 | without error or no self-test has ever
|
---|
33 | been run.
|
---|
34 | Total time to complete Offline
|
---|
35 | data collection: ( 0) seconds.
|
---|
36 | Offline data collection
|
---|
37 | capabilities: (0x71) SMART execute Offline immediate.
|
---|
38 | No Auto Offline data collection support.
|
---|
39 | Suspend Offline collection upon new
|
---|
40 | command.
|
---|
41 | No Offline surface scan supported.
|
---|
42 | Self-test supported.
|
---|
43 | Conveyance Self-test supported.
|
---|
44 | Selective Self-test supported.
|
---|
45 | SMART capabilities: (0x0002) Does not save SMART data before
|
---|
46 | entering power-saving mode.
|
---|
47 | Supports SMART auto save timer.
|
---|
48 | Error logging capability: (0x01) Error logging supported.
|
---|
49 | General Purpose Logging supported.
|
---|
50 | Short self-test routine
|
---|
51 | recommended polling time: ( 2) minutes.
|
---|
52 | Extended self-test routine
|
---|
53 | recommended polling time: ( 10) minutes.
|
---|
54 | Conveyance self-test routine
|
---|
55 | recommended polling time: ( 2) minutes.
|
---|
56 | SCT capabilities: (0x0035) SCT Status supported.
|
---|
57 | SCT Feature Control supported.
|
---|
58 | SCT Data Table supported.
|
---|
59 |
|
---|
60 | SMART Attributes Data Structure revision number: 1
|
---|
61 | Vendor Specific SMART Attributes with Thresholds:
|
---|
62 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
---|
63 | 1 Raw_Read_Error_Rate ------ 100 100 000 - 0
|
---|
64 | 5 Reallocated_Sector_Ct ------ 100 100 000 - 0
|
---|
65 | 9 Power_On_Hours ------ 100 100 000 - 2
|
---|
66 | 12 Power_Cycle_Count ------ 100 100 000 - 12
|
---|
67 | 160 Unknown_Attribute ------ 100 100 000 - 0
|
---|
68 | 161 Unknown_Attribute ------ 100 100 000 - 55
|
---|
69 | 163 Unknown_Attribute ------ 100 100 000 - 36
|
---|
70 | 164 Unknown_Attribute ------ 100 100 000 - 821
|
---|
71 | 165 Unknown_Attribute ------ 100 100 000 - 1
|
---|
72 | 166 Unknown_Attribute ------ 100 100 000 - 0
|
---|
73 | 167 Unknown_Attribute ------ 100 100 000 - 0
|
---|
74 | 168 Unknown_Attribute ------ 100 100 000 - 2000
|
---|
75 | 169 Unknown_Attribute ------ 100 100 000 - 100
|
---|
76 | 175 Program_Fail_Count_Chip ------ 100 100 000 - 0
|
---|
77 | 176 Erase_Fail_Count_Chip ------ 100 100 000 - 0
|
---|
78 | 177 Wear_Leveling_Count ------ 100 100 000 - 0
|
---|
79 | 178 Used_Rsvd_Blk_Cnt_Chip ------ 100 100 000 - 0
|
---|
80 | 181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
|
---|
81 | 182 Erase_Fail_Count_Total ------ 100 100 000 - 0
|
---|
82 | 192 Power-Off_Retract_Count ------ 100 100 000 - 0
|
---|
83 | 194 Temperature_Celsius ------ 100 100 000 - 28
|
---|
84 | 195 Hardware_ECC_Recovered ------ 100 100 000 - 201
|
---|
85 | 196 Reallocated_Event_Count ------ 100 100 000 - 0
|
---|
86 | 197 Current_Pending_Sector ------ 100 100 000 - 0
|
---|
87 | 198 Offline_Uncorrectable ------ 100 100 000 - 0
|
---|
88 | 199 UDMA_CRC_Error_Count ------ 100 100 000 - 0
|
---|
89 | 232 Available_Reservd_Space ------ 100 100 000 - 100
|
---|
90 | 241 Total_LBAs_Written ------ 100 100 000 - 6462
|
---|
91 | 242 Total_LBAs_Read ------ 100 100 000 - 1355
|
---|
92 | 245 Unknown_Attribute ------ 100 100 000 - 6568
|
---|
93 | ||||||_ K auto-keep
|
---|
94 | |||||__ C event count
|
---|
95 | ||||___ R error rate
|
---|
96 | |||____ S speed/performance
|
---|
97 | ||_____ O updated online
|
---|
98 | |______ P prefailure warning
|
---|
99 |
|
---|
100 | General Purpose Log Directory Version 1
|
---|
101 | SMART Log Directory Version 1 [multi-sector log support]
|
---|
102 | Address Access R/W Size Description
|
---|
103 | 0x00 GPL,SL R/O 1 Log Directory
|
---|
104 | 0x04 GPL,SL R/O 8 Device Statistics log
|
---|
105 | 0x06 SL R/O 1 SMART self-test log
|
---|
106 | 0x07 GPL,SL R/O 1 Extended self-test log
|
---|
107 | 0x09 SL R/W 1 Selective self-test log
|
---|
108 | 0x10 GPL,SL R/O 1 SATA NCQ Queued Error log
|
---|
109 | 0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
---|
110 | 0x24 GPL R/O 64 Current Device Internal Status Data log
|
---|
111 | 0x25 GPL R/O 64 Saved Device Internal Status Data log
|
---|
112 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
---|
113 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
---|
114 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
---|
115 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
---|
116 |
|
---|
117 | SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
---|
118 |
|
---|
119 | SMART Error Log not supported
|
---|
120 |
|
---|
121 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
---|
122 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
---|
123 | # 1 Offline Completed without error 00% 1 -
|
---|
124 | # 2 Extended offline Completed without error 00% 1 -
|
---|
125 | # 3 Short offline Completed without error 00% 0 -
|
---|
126 | # 4 Conveyance offline Completed without error 00% 0 -
|
---|
127 |
|
---|
128 | SMART Selective self-test log data structure revision number 1
|
---|
129 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
130 | 1 0 0 Not_testing
|
---|
131 | 2 0 0 Not_testing
|
---|
132 | 3 0 0 Not_testing
|
---|
133 | 4 0 0 Not_testing
|
---|
134 | 5 0 0 Not_testing
|
---|
135 | Selective self-test flags (0x0):
|
---|
136 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
137 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
138 |
|
---|
139 | SCT Status Version: 3
|
---|
140 | SCT Version (vendor specific): 0 (0x0000)
|
---|
141 | SCT Support Level: 0
|
---|
142 | Device State: Active (0)
|
---|
143 | Current Temperature: 0 Celsius
|
---|
144 | Power Cycle Min/Max Temperature: 25/28 Celsius
|
---|
145 | Lifetime Min/Max Temperature: 0/35 Celsius
|
---|
146 | Under/Over Temperature Limit Count: 0/0
|
---|
147 |
|
---|
148 | SCT Temperature History Version: 2
|
---|
149 | Temperature Sampling Period: 1 minute
|
---|
150 | Temperature Logging Interval: 0 minutes
|
---|
151 | Min/Max recommended Temperature: 0/100 Celsius
|
---|
152 | Min/Max Temperature Limit: 0/100 Celsius
|
---|
153 | Temperature History Size (Index): 128 (101)
|
---|
154 |
|
---|
155 | Index Estimated Time Temperature Celsius
|
---|
156 | 102 2015-07-28 19:17 34 ***************
|
---|
157 | ... ..(100 skipped). .. ***************
|
---|
158 | 75 2015-07-28 20:58 34 ***************
|
---|
159 | 76 2015-07-28 20:59 35 ****************
|
---|
160 | 77 2015-07-28 21:00 34 ***************
|
---|
161 | ... ..( 2 skipped). .. ***************
|
---|
162 | 80 2015-07-28 21:03 34 ***************
|
---|
163 | 81 2015-07-28 21:04 35 ****************
|
---|
164 | 82 2015-07-28 21:05 26 *******
|
---|
165 | 83 2015-07-28 21:06 26 *******
|
---|
166 | 84 2015-07-28 21:07 29 **********
|
---|
167 | ... ..( 2 skipped). .. **********
|
---|
168 | 87 2015-07-28 21:10 29 **********
|
---|
169 | 88 2015-07-28 21:11 30 ***********
|
---|
170 | 89 2015-07-28 21:12 25 ******
|
---|
171 | 90 2015-07-28 21:13 25 ******
|
---|
172 | 91 2015-07-28 21:14 27 ********
|
---|
173 | ... ..( 2 skipped). .. ********
|
---|
174 | 94 2015-07-28 21:17 27 ********
|
---|
175 | 95 2015-07-28 21:18 28 *********
|
---|
176 | ... ..( 4 skipped). .. *********
|
---|
177 | 100 2015-07-28 21:23 28 *********
|
---|
178 | 101 2015-07-28 21:24 34 ***************
|
---|
179 |
|
---|
180 | SCT Error Recovery Control command not supported
|
---|
181 |
|
---|
182 | Device Statistics (GP Log 0x04)
|
---|
183 | Page Offset Size Value Flags Description
|
---|
184 | 0x01 ===== = = === == General Statistics (rev 2) ==
|
---|
185 | 0x01 0x008 4 12 --- Lifetime Power-On Resets
|
---|
186 | 0x01 0x010 4 2 --- Power-on Hours
|
---|
187 | 0x01 0x018 6 423532218 --- Logical Sectors Written
|
---|
188 | 0x01 0x020 6 1056261 --- Number of Write Commands
|
---|
189 | 0x01 0x028 6 88828979 --- Logical Sectors Read
|
---|
190 | 0x01 0x030 6 826439 --- Number of Read Commands
|
---|
191 | 0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
---|
192 | 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
---|
193 | 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
---|
194 | 0x06 ===== = = === == Transport Statistics (rev 1) ==
|
---|
195 | 0x06 0x008 4 1408 --- Number of Hardware Resets
|
---|
196 | 0x06 0x018 4 0 --- Number of Interface CRC Errors
|
---|
197 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
---|
198 | 0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
---|
199 | |||_ C monitored condition met
|
---|
200 | ||__ D supports DSN
|
---|
201 | |___ N normalized value
|
---|
202 |
|
---|
203 | SATA Phy Event Counters (GP Log 0x11)
|
---|
204 | ID Size Value Description
|
---|
205 | 0x0001 2 0 Command failed due to ICRC error
|
---|
206 | 0x0002 2 0 R_ERR response for data FIS
|
---|
207 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
---|
208 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
---|
209 | 0x0005 2 0 R_ERR response for non-data FIS
|
---|
210 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
---|
211 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
---|
212 | 0x0008 2 0 Device-to-host non-data FIS retries
|
---|
213 | 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
|
---|
214 | 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
|
---|
215 | 0x000b 2 0 CRC errors within host-to-device FIS
|
---|
216 | 0x000d 2 0 Non-CRC errors within host-to-device FIS
|
---|
217 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
---|
218 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
---|
219 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
---|
220 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
---|
221 |
|
---|