1 | smartctl 6.3 2014-07-26 r3976 [x86_64-w64-mingw32-win7-sp1] (sf-6.3-1)
|
---|
2 | Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Model Family: Seagate Barracuda 7200.14 (AF)
|
---|
6 | Device Model: ST500DM002-1BD142
|
---|
7 | Serial Number: Z2AEX5NZ
|
---|
8 | LU WWN Device Id: 5 000c50 03f0dee23
|
---|
9 | Firmware Version: KC44
|
---|
10 | User Capacity: 500 107 862 016 bytes [500 GB]
|
---|
11 | Sector Sizes: 512 bytes logical, 4096 bytes physical
|
---|
12 | Rotation Rate: 7200 rpm
|
---|
13 | Device is: In smartctl database [for details use: -P show]
|
---|
14 | ATA Version is: ATA8-ACS T13/1699-D revision 4
|
---|
15 | SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
|
---|
16 | Local Time is: Sat Apr 11 15:06:39 2015 RTZ
|
---|
17 | SMART support is: Available - device has SMART capability.
|
---|
18 | SMART support is: Enabled
|
---|
19 |
|
---|
20 | === START OF READ SMART DATA SECTION ===
|
---|
21 | SMART overall-health self-assessment test result: PASSED
|
---|
22 |
|
---|
23 | General SMART Values:
|
---|
24 | Offline data collection status: (0x82) Offline data collection activity
|
---|
25 | was completed without error.
|
---|
26 | Auto Offline Data Collection: Enabled.
|
---|
27 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
28 | without error or no self-test has ever
|
---|
29 | been run.
|
---|
30 | Total time to complete Offline
|
---|
31 | data collection: ( 600) seconds.
|
---|
32 | Offline data collection
|
---|
33 | capabilities: (0x7b) SMART execute Offline immediate.
|
---|
34 | Auto Offline data collection on/off support.
|
---|
35 | Suspend Offline collection upon new
|
---|
36 | command.
|
---|
37 | Offline surface scan supported.
|
---|
38 | Self-test supported.
|
---|
39 | Conveyance Self-test supported.
|
---|
40 | Selective Self-test supported.
|
---|
41 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
42 | power-saving mode.
|
---|
43 | Supports SMART auto save timer.
|
---|
44 | Error logging capability: (0x01) Error logging supported.
|
---|
45 | General Purpose Logging supported.
|
---|
46 | Short self-test routine
|
---|
47 | recommended polling time: ( 1) minutes.
|
---|
48 | Extended self-test routine
|
---|
49 | recommended polling time: ( 81) minutes.
|
---|
50 | Conveyance self-test routine
|
---|
51 | recommended polling time: ( 2) minutes.
|
---|
52 | SCT capabilities: (0x303f) SCT Status supported.
|
---|
53 | SCT Error Recovery Control supported.
|
---|
54 | SCT Feature Control supported.
|
---|
55 | SCT Data Table supported.
|
---|
56 |
|
---|
57 | SMART Attributes Data Structure revision number: 10
|
---|
58 | Vendor Specific SMART Attributes with Thresholds:
|
---|
59 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
---|
60 | 1 Raw_Read_Error_Rate 0x000f 109 099 006 Pre-fail Always - 21727064
|
---|
61 | 3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
|
---|
62 | 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 451
|
---|
63 | 5 Reallocated_Sector_Ct 0x0033 097 097 036 Pre-fail Always - 1176
|
---|
64 | 7 Seek_Error_Rate 0x000f 079 060 030 Pre-fail Always - 99536785
|
---|
65 | 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 3838
|
---|
66 | 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
|
---|
67 | 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 449
|
---|
68 | 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
|
---|
69 | 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
|
---|
70 | 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
|
---|
71 | 188 Command_Timeout 0x0032 100 098 000 Old_age Always - 0 0 48
|
---|
72 | 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
|
---|
73 | 190 Airflow_Temperature_Cel 0x0022 064 055 045 Old_age Always - 36 (Min/Max 24/36)
|
---|
74 | 194 Temperature_Celsius 0x0022 036 045 000 Old_age Always - 36 (0 19 0 0 0)
|
---|
75 | 195 Hardware_ECC_Recovered 0x001a 036 022 000 Old_age Always - 21727064
|
---|
76 | 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
|
---|
77 | 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
|
---|
78 | 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
|
---|
79 | 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 3836h+15m+31.053s
|
---|
80 | 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 4141608643
|
---|
81 | 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1958628184
|
---|
82 |
|
---|
83 | SMART Error Log Version: 1
|
---|
84 | No Errors Logged
|
---|
85 |
|
---|
86 | SMART Self-test log structure revision number 1
|
---|
87 | No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
---|
88 |
|
---|
89 | SMART Selective self-test log data structure revision number 1
|
---|
90 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
91 | 1 0 0 Not_testing
|
---|
92 | 2 0 0 Not_testing
|
---|
93 | 3 0 0 Not_testing
|
---|
94 | 4 0 0 Not_testing
|
---|
95 | 5 0 0 Not_testing
|
---|
96 | Selective self-test flags (0x0):
|
---|
97 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
98 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
99 |
|
---|