1 | smartctl 6.3 2014-07-26 r3976 [x86_64-apple-darwin14.0.0] (local build)
|
---|
2 | Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Device Model: TS256GSSD370
|
---|
6 | Serial Number: B728781xxx
|
---|
7 | Firmware Version: N0815B
|
---|
8 | User Capacity: 256 060 514 304 bytes [256 GB]
|
---|
9 | Sector Size: 512 bytes logical/physical
|
---|
10 | Rotation Rate: Solid State Device
|
---|
11 | Device is: Not in smartctl database [for details use: -P showall]
|
---|
12 | ATA Version is: ACS-2 (minor revision not indicated)
|
---|
13 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
---|
14 | Local Time is: Wed Jan 21 00:15:34 2015 EET
|
---|
15 | SMART support is: Available - device has SMART capability.
|
---|
16 | SMART support is: Enabled
|
---|
17 |
|
---|
18 | === START OF READ SMART DATA SECTION ===
|
---|
19 | SMART overall-health self-assessment test result: PASSED
|
---|
20 |
|
---|
21 | General SMART Values:
|
---|
22 | Offline data collection status: (0x05) Offline data collection activity
|
---|
23 | was aborted by an interrupting command from host.
|
---|
24 | Auto Offline Data Collection: Disabled.
|
---|
25 | Self-test execution status: ( 25) The self-test routine was aborted by
|
---|
26 | the host.
|
---|
27 | Total time to complete Offline
|
---|
28 | data collection: ( 3600) seconds.
|
---|
29 | Offline data collection
|
---|
30 | capabilities: (0x71) SMART execute Offline immediate.
|
---|
31 | No Auto Offline data collection support.
|
---|
32 | Suspend Offline collection upon new
|
---|
33 | command.
|
---|
34 | No Offline surface scan supported.
|
---|
35 | Self-test supported.
|
---|
36 | Conveyance Self-test supported.
|
---|
37 | Selective Self-test supported.
|
---|
38 | SMART capabilities: (0x0002) Does not save SMART data before
|
---|
39 | entering power-saving mode.
|
---|
40 | Supports SMART auto save timer.
|
---|
41 | Error logging capability: (0x01) Error logging supported.
|
---|
42 | General Purpose Logging supported.
|
---|
43 | Short self-test routine
|
---|
44 | recommended polling time: ( 2) minutes.
|
---|
45 | Extended self-test routine
|
---|
46 | recommended polling time: ( 10) minutes.
|
---|
47 | Conveyance self-test routine
|
---|
48 | recommended polling time: ( 2) minutes.
|
---|
49 |
|
---|
50 | SMART Attributes Data Structure revision number: 1
|
---|
51 | Vendor Specific SMART Attributes with Thresholds:
|
---|
52 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
---|
53 | 1 Raw_Read_Error_Rate 0x0000 100 100 000 Old_age Offline - 0
|
---|
54 | 5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 0
|
---|
55 | 9 Power_On_Hours 0x0000 100 100 000 Old_age Offline - 5
|
---|
56 | 12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 33
|
---|
57 | 160 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0
|
---|
58 | 161 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 44
|
---|
59 | 163 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 2
|
---|
60 | 164 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 467
|
---|
61 | 165 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 5
|
---|
62 | 166 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0
|
---|
63 | 167 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0
|
---|
64 | 168 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 3000
|
---|
65 | 169 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 100
|
---|
66 | 177 Wear_Leveling_Count 0x0000 100 100 050 Old_age Offline - 0
|
---|
67 | 181 Program_Fail_Cnt_Total 0x0000 100 100 000 Old_age Offline - 0
|
---|
68 | 182 Erase_Fail_Count_Total 0x0000 100 100 000 Old_age Offline - 0
|
---|
69 | 192 Power-Off_Retract_Count 0x0000 100 100 000 Old_age Offline - 16
|
---|
70 | 194 Temperature_Celsius 0x0000 100 100 000 Old_age Offline - 31
|
---|
71 | 195 Hardware_ECC_Recovered 0x0000 100 100 000 Old_age Offline - 697
|
---|
72 | 196 Reallocated_Event_Count 0x0000 100 100 016 Old_age Offline - 0
|
---|
73 | 197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 0
|
---|
74 | 199 UDMA_CRC_Error_Count 0x0000 100 100 050 Old_age Offline - 5
|
---|
75 | 232 Available_Reservd_Space 0x0000 100 100 000 Old_age Offline - 100
|
---|
76 | 241 Total_LBAs_Written 0x0000 100 100 000 Old_age Offline - 2948
|
---|
77 | 242 Total_LBAs_Read 0x0000 100 100 000 Old_age Offline - 3936
|
---|
78 | 245 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 3736
|
---|
79 |
|
---|
80 | SMART Error Log Version: 1
|
---|
81 | No Errors Logged
|
---|
82 |
|
---|
83 | SMART Self-test log structure revision number 1
|
---|
84 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
---|
85 | # 1 Abort offline test Aborted by host 90% 0 -
|
---|
86 | # 2 Short offline Completed without error 00% 0 -
|
---|
87 | # 3 Short offline Completed without error 00% 0 -
|
---|
88 |
|
---|
89 | SMART Selective self-test log data structure revision number 1
|
---|
90 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
91 | 1 0 0 Not_testing
|
---|
92 | 2 0 0 Not_testing
|
---|
93 | 3 0 0 Not_testing
|
---|
94 | 4 0 0 Not_testing
|
---|
95 | 5 0 0 Not_testing
|
---|
96 | Selective self-test flags (0x0):
|
---|
97 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
98 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
99 |
|
---|