| 1 | smartctl 6.3 2014-07-26 r3976 [x86_64-w64-mingw32-win7-sp1] (sf-6.3-1)
|
|---|
| 2 | Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: TS64GSSD370
|
|---|
| 6 | Serial Number: B552600355
|
|---|
| 7 | Firmware Version: 20140516
|
|---|
| 8 | User Capacity: 64 023 257 088 bytes [64,0 GB]
|
|---|
| 9 | Sector Size: 512 bytes logical/physical
|
|---|
| 10 | Rotation Rate: Solid State Device
|
|---|
| 11 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 12 | ATA Version is: ACS-2 (minor revision not indicated)
|
|---|
| 13 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
|---|
| 14 | Local Time is: Mon Oct 20 23:31:01 2014
|
|---|
| 15 | SMART support is: Available - device has SMART capability.
|
|---|
| 16 | SMART support is: Enabled
|
|---|
| 17 |
|
|---|
| 18 | === START OF READ SMART DATA SECTION ===
|
|---|
| 19 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 20 |
|
|---|
| 21 | General SMART Values:
|
|---|
| 22 | Offline data collection status: (0x00) Offline data collection activity
|
|---|
| 23 | was never started.
|
|---|
| 24 | Auto Offline Data Collection: Disabled.
|
|---|
| 25 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 26 |
|
|---|
| 27 | without error or no self-test has ever
|
|---|
| 28 | been run.
|
|---|
| 29 | Total time to complete Offline
|
|---|
| 30 | data collection: ( 0) seconds.
|
|---|
| 31 | Offline data collection
|
|---|
| 32 | capabilities: (0x71) SMART execute Offline immediate.
|
|---|
| 33 | No Auto Offline data collection support.
|
|---|
| 34 |
|
|---|
| 35 | Suspend Offline collection upon new
|
|---|
| 36 | command.
|
|---|
| 37 | No Offline surface scan supported.
|
|---|
| 38 | Self-test supported.
|
|---|
| 39 | Conveyance Self-test supported.
|
|---|
| 40 | Selective Self-test supported.
|
|---|
| 41 | SMART capabilities: (0x0002) Does not save SMART data before
|
|---|
| 42 | entering power-saving mode.
|
|---|
| 43 | Supports SMART auto save timer.
|
|---|
| 44 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 45 | General Purpose Logging supported.
|
|---|
| 46 | Short self-test routine
|
|---|
| 47 | recommended polling time: ( 2) minutes.
|
|---|
| 48 | Extended self-test routine
|
|---|
| 49 | recommended polling time: ( 10) minutes.
|
|---|
| 50 | Conveyance self-test routine
|
|---|
| 51 | recommended polling time: ( 2) minutes.
|
|---|
| 52 |
|
|---|
| 53 | SMART Attributes Data Structure revision number: 1
|
|---|
| 54 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 55 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_
|
|---|
| 56 | FAILED RAW_VALUE
|
|---|
| 57 | 1 Raw_Read_Error_Rate 0x0000 100 100 000 Old_age Offline -
|
|---|
| 58 | 0
|
|---|
| 59 | 5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline -
|
|---|
| 60 | 0
|
|---|
| 61 | 9 Power_On_Hours 0x0000 100 100 000 Old_age Offline -
|
|---|
| 62 | 39
|
|---|
| 63 | 12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline -
|
|---|
| 64 | 207
|
|---|
| 65 | 192 Power-Off_Retract_Count 0x0000 100 100 000 Old_age Offline -
|
|---|
| 66 | 10
|
|---|
| 67 | 194 Temperature_Celsius 0x0000 100 100 000 Old_age Offline -
|
|---|
| 68 | 36
|
|---|
| 69 | 195 Hardware_ECC_Recovered 0x0000 100 100 000 Old_age Offline -
|
|---|
| 70 | 6775
|
|---|
| 71 | 196 Reallocated_Event_Count 0x0000 100 100 016 Old_age Offline -
|
|---|
| 72 | 0
|
|---|
| 73 | 197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline -
|
|---|
| 74 | 0
|
|---|
| 75 | 199 UDMA_CRC_Error_Count 0x0000 100 100 050 Old_age Offline -
|
|---|
| 76 | 8
|
|---|
| 77 | 160 Unknown_Attribute 0x0000 100 100 000 Old_age Offline -
|
|---|
| 78 | 0
|
|---|
| 79 | 161 Unknown_Attribute 0x0000 100 100 000 Old_age Offline -
|
|---|
| 80 | 47
|
|---|
| 81 | 163 Unknown_Attribute 0x0000 100 100 000 Old_age Offline -
|
|---|
| 82 | 22
|
|---|
| 83 | 164 Unknown_Attribute 0x0000 100 100 000 Old_age Offline -
|
|---|
| 84 | 14185
|
|---|
| 85 | 165 Unknown_Attribute 0x0000 100 100 000 Old_age Offline -
|
|---|
| 86 | 58
|
|---|
| 87 | 166 Unknown_Attribute 0x0000 100 100 000 Old_age Offline -
|
|---|
| 88 | 0
|
|---|
| 89 | 167 Unknown_Attribute 0x0000 100 100 000 Old_age Offline -
|
|---|
| 90 | 13
|
|---|
| 91 | 168 Unknown_Attribute 0x0000 100 100 000 Old_age Offline -
|
|---|
| 92 | 3000
|
|---|
| 93 | 169 Unknown_Attribute 0x0000 100 100 000 Old_age Offline -
|
|---|
| 94 | 100
|
|---|
| 95 | 232 Available_Reservd_Space 0x0000 100 100 000 Old_age Offline -
|
|---|
| 96 | 100
|
|---|
| 97 | 177 Wear_Leveling_Count 0x0000 100 100 050 Old_age Offline -
|
|---|
| 98 | 0
|
|---|
| 99 | 181 Program_Fail_Cnt_Total 0x0000 100 100 000 Old_age Offline -
|
|---|
| 100 | 0
|
|---|
| 101 | 182 Erase_Fail_Count_Total 0x0000 100 100 000 Old_age Offline -
|
|---|
| 102 | 0
|
|---|
| 103 | 241 Total_LBAs_Written 0x0000 100 100 000 Old_age Offline -
|
|---|
| 104 | 15031
|
|---|
| 105 | 242 Total_LBAs_Read 0x0000 100 100 000 Old_age Offline -
|
|---|
| 106 | 23230
|
|---|
| 107 |
|
|---|
| 108 | SMART Error Log Version: 1
|
|---|
| 109 | No Errors Logged
|
|---|
| 110 |
|
|---|
| 111 | SMART Self-test log structure revision number 1
|
|---|
| 112 | No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|---|
| 113 |
|
|---|
| 114 | SMART Selective self-test log data structure revision number 1
|
|---|
| 115 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 116 | 1 0 0 Not_testing
|
|---|
| 117 | 2 0 0 Not_testing
|
|---|
| 118 | 3 0 0 Not_testing
|
|---|
| 119 | 4 0 0 Not_testing
|
|---|
| 120 | 5 0 0 Not_testing
|
|---|
| 121 | Selective self-test flags (0x0):
|
|---|
| 122 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 123 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
