1 | smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.8.0-31-generic] (local build)
|
---|
2 | Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Device Model: PLEXTOR PX-128M5S
|
---|
6 | Firmware Version: 1.04
|
---|
7 | User Capacity: 128,035,676,160 bytes [128 GB]
|
---|
8 | Sector Size: 512 bytes logical/physical
|
---|
9 | Rotation Rate: Solid State Device
|
---|
10 | Device is: Not in smartctl database [for details use: -P showall]
|
---|
11 | ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 4a
|
---|
12 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
|
---|
13 | Local Time is: Wed Oct 2 19:51:44 2013 CDT
|
---|
14 | SMART support is: Available - device has SMART capability.
|
---|
15 | SMART support is: Enabled
|
---|
16 | AAM feature is: Unavailable
|
---|
17 | APM feature is: Unavailable
|
---|
18 | Rd look-ahead is: Enabled
|
---|
19 | Write cache is: Enabled
|
---|
20 | ATA Security is: Disabled, frozen [SEC2]
|
---|
21 | Wt Cache Reorder: Enabled
|
---|
22 |
|
---|
23 | === START OF READ SMART DATA SECTION ===
|
---|
24 | SMART overall-health self-assessment test result: PASSED
|
---|
25 |
|
---|
26 | General SMART Values:
|
---|
27 | Offline data collection status: (0x00) Offline data collection activity
|
---|
28 | was never started.
|
---|
29 | Auto Offline Data Collection: Disabled.
|
---|
30 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
31 | without error or no self-test has ever
|
---|
32 | been run.
|
---|
33 | Total time to complete Offline
|
---|
34 | data collection: ( 10) seconds.
|
---|
35 | Offline data collection
|
---|
36 | capabilities: (0x15) SMART execute Offline immediate.
|
---|
37 | No Auto Offline data collection support.
|
---|
38 | Abort Offline collection upon new
|
---|
39 | command.
|
---|
40 | No Offline surface scan supported.
|
---|
41 | Self-test supported.
|
---|
42 | No Conveyance Self-test supported.
|
---|
43 | No Selective Self-test supported.
|
---|
44 | SMART capabilities: (0x0002) Does not save SMART data before
|
---|
45 | entering power-saving mode.
|
---|
46 | Supports SMART auto save timer.
|
---|
47 | Error logging capability: (0x00) Error logging supported.
|
---|
48 | General Purpose Logging supported.
|
---|
49 | Short self-test routine
|
---|
50 | recommended polling time: ( 1) minutes.
|
---|
51 | Extended self-test routine
|
---|
52 | recommended polling time: ( 10) minutes.
|
---|
53 | SCT capabilities: (0x003d) SCT Status supported.
|
---|
54 | SCT Error Recovery Control supported.
|
---|
55 | SCT Feature Control supported.
|
---|
56 | SCT Data Table supported.
|
---|
57 |
|
---|
58 | SMART Attributes Data Structure revision number: 1
|
---|
59 | Vendor Specific SMART Attributes with Thresholds:
|
---|
60 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
---|
61 | 1 Raw_Read_Error_Rate PO---- 100 100 070 - 0
|
---|
62 | 5 Reallocated_Sector_Ct PO---- 100 100 000 - 0
|
---|
63 | 9 Power_On_Hours -O---- 100 100 000 - 36
|
---|
64 | 12 Power_Cycle_Count -O---- 100 100 000 - 7
|
---|
65 | 177 Wear_Leveling_Count PO---- 100 100 000 - 2196
|
---|
66 | 178 Used_Rsvd_Blk_Cnt_Chip PO---- 100 100 000 - 0
|
---|
67 | 181 Program_Fail_Cnt_Total PO---- 100 100 000 - 0
|
---|
68 | 182 Erase_Fail_Count_Total PO---- 100 100 000 - 0
|
---|
69 | 187 Reported_Uncorrect -O---- 100 100 000 - 0
|
---|
70 | 192 Power-Off_Retract_Count PO---- 100 100 000 - 4
|
---|
71 | 196 Reallocated_Event_Count PO---- 100 100 000 - 0
|
---|
72 | 198 Offline_Uncorrectable PO---- 100 100 000 - 0
|
---|
73 | 199 UDMA_CRC_Error_Count PO---- 100 100 000 - 0
|
---|
74 | 232 Available_Reservd_Space PO---- 100 100 010 - 0
|
---|
75 | 241 Total_LBAs_Written PO---- 100 100 000 - 6521
|
---|
76 | 242 Total_LBAs_Read PO---- 100 100 000 - 2800
|
---|
77 | ||||||_ K auto-keep
|
---|
78 | |||||__ C event count
|
---|
79 | ||||___ R error rate
|
---|
80 | |||____ S speed/performance
|
---|
81 | ||_____ O updated online
|
---|
82 | |______ P prefailure warning
|
---|
83 |
|
---|
84 | General Purpose Log Directory Version 0
|
---|
85 | SMART Log Directory Version 0
|
---|
86 | Address Access R/W Size Description
|
---|
87 | 0x00 GPL,SL R/O 1 Log Directory
|
---|
88 | 0x01 GPL,SL R/O 1 Summary SMART error log
|
---|
89 | 0x06 GPL,SL R/O 1 SMART self-test log
|
---|
90 | 0x07 GPL,SL R/O 1 Extended self-test log
|
---|
91 | 0x10 GPL,SL R/O 1 NCQ Command Error log
|
---|
92 | 0x11 GPL,SL R/O 1 SATA Phy Event Counters
|
---|
93 | 0x80-0x9f GPL,SL R/W 1 Host vendor specific log
|
---|
94 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
---|
95 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
---|
96 |
|
---|
97 | SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
---|
98 |
|
---|
99 | SMART Error Log Version: 0
|
---|
100 | No Errors Logged
|
---|
101 |
|
---|
102 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
---|
103 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
---|
104 | # 1 Extended offline Completed without error 00% 0 -
|
---|
105 | # 2 Short offline Completed without error 00% 0 -
|
---|
106 |
|
---|
107 | Selective Self-tests/Logging not supported
|
---|
108 |
|
---|
109 | SCT Status Version: 3
|
---|
110 | SCT Version (vendor specific): 1 (0x0001)
|
---|
111 | SCT Support Level: 1
|
---|
112 | Device State: Active (0)
|
---|
113 | Current Temperature: ? Celsius
|
---|
114 | Power Cycle Min/Max Temperature: ?/ ? Celsius
|
---|
115 | Lifetime Min/Max Temperature: ?/ ? Celsius
|
---|
116 | Under/Over Temperature Limit Count: 0/0
|
---|
117 | SCT Temperature History Version: 2
|
---|
118 | Temperature Sampling Period: 0 minutes
|
---|
119 | Temperature Logging Interval: 0 minutes
|
---|
120 | Min/Max recommended Temperature: ?/ ? Celsius
|
---|
121 | Min/Max Temperature Limit: ?/ ? Celsius
|
---|
122 | Temperature History Size (Index): 128 (0)
|
---|
123 |
|
---|
124 | Index Estimated Time Temperature Celsius
|
---|
125 | 1 2013-10-02 17:44 ? -
|
---|
126 | ... ..(126 skipped). .. -
|
---|
127 | 0 2013-10-02 19:51 ? -
|
---|
128 |
|
---|
129 | SCT Error Recovery Control:
|
---|
130 | Read: 2 (0.2 seconds)
|
---|
131 | Write: 2 (0.2 seconds)
|
---|
132 |
|
---|
133 | Device Statistics (GP Log 0x04) not supported
|
---|
134 |
|
---|
135 | SATA Phy Event Counters (GP Log 0x11)
|
---|
136 | ID Size Value Description
|
---|
137 | 0x0001 2 0 Command failed due to ICRC error
|
---|
138 | 0x0002 2 0 R_ERR response for data FIS
|
---|
139 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
---|
140 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
---|
141 | 0x0005 2 0 R_ERR response for non-data FIS
|
---|
142 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
---|
143 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
---|
144 | 0x0008 2 0 Device-to-host non-data FIS retries
|
---|
145 | 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
|
---|
146 | 0x000a 2 11 Device-to-host register FISes sent due to a COMRESET
|
---|
147 | 0x000b 2 0 CRC errors within host-to-device FIS
|
---|
148 | 0x000d 2 0 Non-CRC errors within host-to-device FIS
|
---|
149 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
---|
150 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
---|
151 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
---|
152 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
---|
153 |
|
---|