1 | smartctl 6.1 2013-03-16 r3800 [i686-linux-3.8.0-26-generic] (local build) |
---|
2 | Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org |
---|
3 | |
---|
4 | === START OF INFORMATION SECTION === |
---|
5 | Device Model: ST4000NM0033-9ZM170 |
---|
6 | Serial Number: Z1Z038AJ |
---|
7 | LU WWN Device Id: 5 000c50 04e7e8b57 |
---|
8 | Firmware Version: SN03 |
---|
9 | User Capacity: 4,000,787,030,016 bytes [4.00 TB] |
---|
10 | Sector Size: 512 bytes logical/physical |
---|
11 | Rotation Rate: 7200 rpm |
---|
12 | Device is: Not in smartctl database [for details use: -P showall] |
---|
13 | ATA Version is: ACS-2 (minor revision not indicated) |
---|
14 | SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) |
---|
15 | Local Time is: Wed Jul 24 11:37:10 2013 MDT |
---|
16 | SMART support is: Available - device has SMART capability. |
---|
17 | SMART support is: Enabled |
---|
18 | AAM feature is: Unavailable |
---|
19 | APM feature is: Unavailable |
---|
20 | Rd look-ahead is: Enabled |
---|
21 | Write cache is: Enabled |
---|
22 | ATA Security is: Disabled, NOT FROZEN [SEC1] |
---|
23 | |
---|
24 | === START OF READ SMART DATA SECTION === |
---|
25 | SMART overall-health self-assessment test result: PASSED |
---|
26 | See vendor-specific Attribute list for marginal Attributes. |
---|
27 | |
---|
28 | General SMART Values: |
---|
29 | Offline data collection status: (0x82) Offline data collection activity |
---|
30 | was completed without error. |
---|
31 | Auto Offline Data Collection: Enabled. |
---|
32 | Self-test execution status: ( 0) The previous self-test routine completed |
---|
33 | without error or no self-test has ever |
---|
34 | been run. |
---|
35 | Total time to complete Offline |
---|
36 | data collection: ( 592) seconds. |
---|
37 | Offline data collection |
---|
38 | capabilities: (0x7b) SMART execute Offline immediate. |
---|
39 | Auto Offline data collection on/off support. |
---|
40 | Suspend Offline collection upon new |
---|
41 | command. |
---|
42 | Offline surface scan supported. |
---|
43 | Self-test supported. |
---|
44 | Conveyance Self-test supported. |
---|
45 | Selective Self-test supported. |
---|
46 | SMART capabilities: (0x0003) Saves SMART data before entering |
---|
47 | power-saving mode. |
---|
48 | Supports SMART auto save timer. |
---|
49 | Error logging capability: (0x01) Error logging supported. |
---|
50 | General Purpose Logging supported. |
---|
51 | Short self-test routine |
---|
52 | recommended polling time: ( 1) minutes. |
---|
53 | Extended self-test routine |
---|
54 | recommended polling time: ( 497) minutes. |
---|
55 | Conveyance self-test routine |
---|
56 | recommended polling time: ( 2) minutes. |
---|
57 | SCT capabilities: (0x50bd) SCT Status supported. |
---|
58 | SCT Error Recovery Control supported. |
---|
59 | SCT Feature Control supported. |
---|
60 | SCT Data Table supported. |
---|
61 | |
---|
62 | SMART Attributes Data Structure revision number: 10 |
---|
63 | Vendor Specific SMART Attributes with Thresholds: |
---|
64 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE |
---|
65 | 1 Raw_Read_Error_Rate POSR-- 100 100 044 - 135334 |
---|
66 | 3 Spin_Up_Time PO---- 094 093 000 - 0 |
---|
67 | 4 Start_Stop_Count -O--CK 100 100 020 - 20 |
---|
68 | 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 |
---|
69 | 7 Seek_Error_Rate POSR-- 079 060 030 - 85041505 |
---|
70 | 9 Power_On_Hours -O--CK 100 100 000 - 626 |
---|
71 | 10 Spin_Retry_Count PO--C- 100 100 097 - 0 |
---|
72 | 12 Power_Cycle_Count -O--CK 100 100 020 - 19 |
---|
73 | 184 End-to-End_Error -O--CK 100 100 099 - 0 |
---|
74 | 187 Reported_Uncorrect -O--CK 100 100 000 - 0 |
---|
75 | 188 Command_Timeout -O--CK 100 100 000 - 0 |
---|
76 | 189 High_Fly_Writes -O-RCK 100 100 000 - 0 |
---|
77 | 190 Airflow_Temperature_Cel -O---K 046 044 045 Past 54 (0 3 55 54 0) |
---|
78 | 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 |
---|
79 | 192 Power-Off_Retract_Count -O--CK 100 100 000 - 17 |
---|
80 | 193 Load_Cycle_Count -O--CK 100 100 000 - 43 |
---|
81 | 194 Temperature_Celsius -O---K 054 056 000 - 54 (0 23 0 0 0) |
---|
82 | 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 135334 |
---|
83 | 197 Current_Pending_Sector -O--C- 100 100 000 - 0 |
---|
84 | 198 Offline_Uncorrectable ----C- 100 100 000 - 0 |
---|
85 | 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 |
---|
86 | ||||||_ K auto-keep |
---|
87 | |||||__ C event count |
---|
88 | ||||___ R error rate |
---|
89 | |||____ S speed/performance |
---|
90 | ||_____ O updated online |
---|
91 | |______ P prefailure warning |
---|
92 | |
---|
93 | General Purpose Log Directory Version 1 |
---|
94 | SMART Log Directory Version 1 [multi-sector log support] |
---|
95 | Address Access R/W Size Description |
---|
96 | 0x00 GPL,SL R/O 1 Log Directory |
---|
97 | 0x01 SL R/O 1 Summary SMART error log |
---|
98 | 0x02 SL R/O 5 Comprehensive SMART error log |
---|
99 | 0x03 GPL R/O 5 Ext. Comprehensive SMART error log |
---|
100 | 0x06 SL R/O 1 SMART self-test log |
---|
101 | 0x07 GPL R/O 1 Extended self-test log |
---|
102 | 0x08 GPL,SL R/O 2 Power Conditions log |
---|
103 | 0x09 SL R/W 1 Selective self-test log |
---|
104 | 0x10 GPL R/O 1 NCQ Command Error log |
---|
105 | 0x11 GPL R/O 1 SATA Phy Event Counters |
---|
106 | 0x21 GPL R/O 1 Write stream error log |
---|
107 | 0x22 GPL R/O 1 Read stream error log |
---|
108 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log |
---|
109 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log |
---|
110 | 0xa1 GPL,SL VS 20 Device vendor specific log |
---|
111 | 0xa2 GPL VS 4496 Device vendor specific log |
---|
112 | 0xa8 GPL,SL VS 129 Device vendor specific log |
---|
113 | 0xa9 GPL,SL VS 1 Device vendor specific log |
---|
114 | 0xb0 GPL VS 5176 Device vendor specific log |
---|
115 | 0xbd GPL VS 512 Device vendor specific log |
---|
116 | 0xbe-0xbf GPL VS 65535 Device vendor specific log |
---|
117 | 0xc1 GPL,SL VS 10 Device vendor specific log |
---|
118 | 0xc2 GPL,SL VS 50 Device vendor specific log |
---|
119 | 0xc3 GPL,SL VS 8 Device vendor specific log |
---|
120 | 0xc4 GPL,SL VS 5 Device vendor specific log |
---|
121 | 0xe0 GPL,SL R/W 1 SCT Command/Status |
---|
122 | 0xe1 GPL,SL R/W 1 SCT Data Transfer |
---|
123 | |
---|
124 | SMART Extended Comprehensive Error Log Version: 1 (5 sectors) |
---|
125 | No Errors Logged |
---|
126 | |
---|
127 | SMART Extended Self-test Log Version: 1 (1 sectors) |
---|
128 | No self-tests have been logged. [To run self-tests, use: smartctl -t] |
---|
129 | |
---|
130 | SMART Selective self-test log data structure revision number 1 |
---|
131 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
---|
132 | 1 0 0 Not_testing |
---|
133 | 2 0 0 Not_testing |
---|
134 | 3 0 0 Not_testing |
---|
135 | 4 0 0 Not_testing |
---|
136 | 5 0 0 Not_testing |
---|
137 | Selective self-test flags (0x0): |
---|
138 | After scanning selected spans, do NOT read-scan remainder of disk. |
---|
139 | If Selective self-test is pending on power-up, resume after 0 minute delay. |
---|
140 | |
---|
141 | SCT Status Version: 3 |
---|
142 | SCT Version (vendor specific): 522 (0x020a) |
---|
143 | SCT Support Level: 1 |
---|
144 | Device State: Active (0) |
---|
145 | Current Temperature: 55 Celsius |
---|
146 | Power Cycle Min/Max Temperature: 55/55 Celsius |
---|
147 | Lifetime Min/Max Temperature: 22/55 Celsius |
---|
148 | Under/Over Temperature Limit Count: 0/1 |
---|
149 | SCT Temperature History Version: 2 |
---|
150 | Temperature Sampling Period: 1 minute |
---|
151 | Temperature Logging Interval: 10 minutes |
---|
152 | Min/Max recommended Temperature: 0/ 0 Celsius |
---|
153 | Min/Max Temperature Limit: 0/ 0 Celsius |
---|
154 | Temperature History Size (Index): 128 (76) |
---|
155 | |
---|
156 | Index Estimated Time Temperature Celsius |
---|
157 | 77 2013-07-23 14:20 47 **************************** |
---|
158 | ... ..( 2 skipped). .. **************************** |
---|
159 | 80 2013-07-23 14:50 47 **************************** |
---|
160 | 81 2013-07-23 15:00 48 ***************************** |
---|
161 | ... ..( 5 skipped). .. ***************************** |
---|
162 | 87 2013-07-23 16:00 48 ***************************** |
---|
163 | 88 2013-07-23 16:10 47 **************************** |
---|
164 | ... ..( 21 skipped). .. **************************** |
---|
165 | 110 2013-07-23 19:50 47 **************************** |
---|
166 | 111 2013-07-23 20:00 46 *************************** |
---|
167 | ... ..( 8 skipped). .. *************************** |
---|
168 | 120 2013-07-23 21:30 46 *************************** |
---|
169 | 121 2013-07-23 21:40 45 ************************** |
---|
170 | 122 2013-07-23 21:50 44 ************************* |
---|
171 | ... ..( 4 skipped). .. ************************* |
---|
172 | 127 2013-07-23 22:40 44 ************************* |
---|
173 | 0 2013-07-23 22:50 43 ************************ |
---|
174 | ... ..( 43 skipped). .. ************************ |
---|
175 | 44 2013-07-24 06:10 43 ************************ |
---|
176 | 45 2013-07-24 06:20 42 *********************** |
---|
177 | ... ..( 15 skipped). .. *********************** |
---|
178 | 61 2013-07-24 09:00 42 *********************** |
---|
179 | 62 2013-07-24 09:10 43 ************************ |
---|
180 | ... ..( 9 skipped). .. ************************ |
---|
181 | 72 2013-07-24 10:50 43 ************************ |
---|
182 | 73 2013-07-24 11:00 ? - |
---|
183 | 74 2013-07-24 11:10 43 ************************ |
---|
184 | 75 2013-07-24 11:20 ? - |
---|
185 | 76 2013-07-24 11:30 55 ************************************ |
---|
186 | |
---|
187 | SCT Error Recovery Control: |
---|
188 | Read: 100 (10.0 seconds) |
---|
189 | Write: 100 (10.0 seconds) |
---|
190 | |
---|
191 | Device Statistics (GP Log 0x04) not supported |
---|
192 | |
---|
193 | SATA Phy Event Counters (GP Log 0x11) |
---|
194 | ID Size Value Description |
---|
195 | 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET |
---|
196 | 0x0001 2 0 Command failed due to ICRC error |
---|
197 | 0x0003 2 0 R_ERR response for device-to-host data FIS |
---|
198 | 0x0004 2 0 R_ERR response for host-to-device data FIS |
---|
199 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS |
---|
200 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS |
---|
201 | |
---|
202 | smartctl 6.1 2013-03-16 r3800 [i686-linux-3.8.0-26-generic] (local build) |
---|
203 | Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org |
---|
204 | |
---|
205 | === START OF INFORMATION SECTION === |
---|
206 | Device Model: ST4000NM0033-9ZM170 |
---|
207 | Serial Number: Z1Z038AJ |
---|
208 | LU WWN Device Id: 5 000c50 04e7e8b57 |
---|
209 | Firmware Version: SN03 |
---|
210 | User Capacity: 4,000,787,030,016 bytes [4.00 TB] |
---|
211 | Sector Size: 512 bytes logical/physical |
---|
212 | Rotation Rate: 7200 rpm |
---|
213 | Device is: Not in smartctl database [for details use: -P showall] |
---|
214 | ATA Version is: ACS-2 (minor revision not indicated) |
---|
215 | SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) |
---|
216 | Local Time is: Wed Jul 24 12:04:43 2013 MDT |
---|
217 | SMART support is: Available - device has SMART capability. |
---|
218 | SMART support is: Enabled |
---|
219 | AAM feature is: Unavailable |
---|
220 | APM feature is: Unavailable |
---|
221 | Rd look-ahead is: Enabled |
---|
222 | Write cache is: Enabled |
---|
223 | ATA Security is: Disabled, NOT FROZEN [SEC1] |
---|
224 | |
---|
225 | === START OF READ SMART DATA SECTION === |
---|
226 | SMART overall-health self-assessment test result: PASSED |
---|
227 | See vendor-specific Attribute list for marginal Attributes. |
---|
228 | |
---|
229 | General SMART Values: |
---|
230 | Offline data collection status: (0x82) Offline data collection activity |
---|
231 | was completed without error. |
---|
232 | Auto Offline Data Collection: Enabled. |
---|
233 | Self-test execution status: ( 0) The previous self-test routine completed |
---|
234 | without error or no self-test has ever |
---|
235 | been run. |
---|
236 | Total time to complete Offline |
---|
237 | data collection: ( 592) seconds. |
---|
238 | Offline data collection |
---|
239 | capabilities: (0x7b) SMART execute Offline immediate. |
---|
240 | Auto Offline data collection on/off support. |
---|
241 | Suspend Offline collection upon new |
---|
242 | command. |
---|
243 | Offline surface scan supported. |
---|
244 | Self-test supported. |
---|
245 | Conveyance Self-test supported. |
---|
246 | Selective Self-test supported. |
---|
247 | SMART capabilities: (0x0003) Saves SMART data before entering |
---|
248 | power-saving mode. |
---|
249 | Supports SMART auto save timer. |
---|
250 | Error logging capability: (0x01) Error logging supported. |
---|
251 | General Purpose Logging supported. |
---|
252 | Short self-test routine |
---|
253 | recommended polling time: ( 1) minutes. |
---|
254 | Extended self-test routine |
---|
255 | recommended polling time: ( 497) minutes. |
---|
256 | Conveyance self-test routine |
---|
257 | recommended polling time: ( 2) minutes. |
---|
258 | SCT capabilities: (0x50bd) SCT Status supported. |
---|
259 | SCT Error Recovery Control supported. |
---|
260 | SCT Feature Control supported. |
---|
261 | SCT Data Table supported. |
---|
262 | |
---|
263 | SMART Attributes Data Structure revision number: 10 |
---|
264 | Vendor Specific SMART Attributes with Thresholds: |
---|
265 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE |
---|
266 | 1 Raw_Read_Error_Rate POSR-- 100 100 044 - 144548 |
---|
267 | 3 Spin_Up_Time PO---- 093 093 000 - 0 |
---|
268 | 4 Start_Stop_Count -O--CK 100 100 020 - 21 |
---|
269 | 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 |
---|
270 | 7 Seek_Error_Rate POSR-- 079 060 030 - 85043306 |
---|
271 | 9 Power_On_Hours -O--CK 100 100 000 - 626 |
---|
272 | 10 Spin_Retry_Count PO--C- 100 100 097 - 0 |
---|
273 | 12 Power_Cycle_Count -O--CK 100 100 020 - 20 |
---|
274 | 184 End-to-End_Error -O--CK 100 100 099 - 0 |
---|
275 | 187 Reported_Uncorrect -O--CK 100 100 000 - 0 |
---|
276 | 188 Command_Timeout -O--CK 100 100 000 - 0 |
---|
277 | 189 High_Fly_Writes -O-RCK 100 100 000 - 0 |
---|
278 | 190 Airflow_Temperature_Cel -O---K 065 044 045 Past 35 (0 3 35 35 0) |
---|
279 | 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 |
---|
280 | 192 Power-Off_Retract_Count -O--CK 100 100 000 - 18 |
---|
281 | 193 Load_Cycle_Count -O--CK 100 100 000 - 44 |
---|
282 | 194 Temperature_Celsius -O---K 035 056 000 - 35 (0 23 0 0 0) |
---|
283 | 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 144548 |
---|
284 | 197 Current_Pending_Sector -O--C- 100 100 000 - 0 |
---|
285 | 198 Offline_Uncorrectable ----C- 100 100 000 - 0 |
---|
286 | 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 |
---|
287 | ||||||_ K auto-keep |
---|
288 | |||||__ C event count |
---|
289 | ||||___ R error rate |
---|
290 | |||____ S speed/performance |
---|
291 | ||_____ O updated online |
---|
292 | |______ P prefailure warning |
---|
293 | |
---|
294 | General Purpose Log Directory Version 1 |
---|
295 | SMART Log Directory Version 1 [multi-sector log support] |
---|
296 | Address Access R/W Size Description |
---|
297 | 0x00 GPL,SL R/O 1 Log Directory |
---|
298 | 0x01 SL R/O 1 Summary SMART error log |
---|
299 | 0x02 SL R/O 5 Comprehensive SMART error log |
---|
300 | 0x03 GPL R/O 5 Ext. Comprehensive SMART error log |
---|
301 | 0x06 SL R/O 1 SMART self-test log |
---|
302 | 0x07 GPL R/O 1 Extended self-test log |
---|
303 | 0x08 GPL,SL R/O 2 Power Conditions log |
---|
304 | 0x09 SL R/W 1 Selective self-test log |
---|
305 | 0x10 GPL R/O 1 NCQ Command Error log |
---|
306 | 0x11 GPL R/O 1 SATA Phy Event Counters |
---|
307 | 0x21 GPL R/O 1 Write stream error log |
---|
308 | 0x22 GPL R/O 1 Read stream error log |
---|
309 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log |
---|
310 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log |
---|
311 | 0xa1 GPL,SL VS 20 Device vendor specific log |
---|
312 | 0xa2 GPL VS 4496 Device vendor specific log |
---|
313 | 0xa8 GPL,SL VS 129 Device vendor specific log |
---|
314 | 0xa9 GPL,SL VS 1 Device vendor specific log |
---|
315 | 0xb0 GPL VS 5176 Device vendor specific log |
---|
316 | 0xbd GPL VS 512 Device vendor specific log |
---|
317 | 0xbe-0xbf GPL VS 65535 Device vendor specific log |
---|
318 | 0xc1 GPL,SL VS 10 Device vendor specific log |
---|
319 | 0xc2 GPL,SL VS 50 Device vendor specific log |
---|
320 | 0xc3 GPL,SL VS 8 Device vendor specific log |
---|
321 | 0xc4 GPL,SL VS 5 Device vendor specific log |
---|
322 | 0xe0 GPL,SL R/W 1 SCT Command/Status |
---|
323 | 0xe1 GPL,SL R/W 1 SCT Data Transfer |
---|
324 | |
---|
325 | SMART Extended Comprehensive Error Log Version: 1 (5 sectors) |
---|
326 | No Errors Logged |
---|
327 | |
---|
328 | SMART Extended Self-test Log Version: 1 (1 sectors) |
---|
329 | No self-tests have been logged. [To run self-tests, use: smartctl -t] |
---|
330 | |
---|
331 | SMART Selective self-test log data structure revision number 1 |
---|
332 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
---|
333 | 1 0 0 Not_testing |
---|
334 | 2 0 0 Not_testing |
---|
335 | 3 0 0 Not_testing |
---|
336 | 4 0 0 Not_testing |
---|
337 | 5 0 0 Not_testing |
---|
338 | Selective self-test flags (0x0): |
---|
339 | After scanning selected spans, do NOT read-scan remainder of disk. |
---|
340 | If Selective self-test is pending on power-up, resume after 0 minute delay. |
---|
341 | |
---|
342 | SCT Status Version: 3 |
---|
343 | SCT Version (vendor specific): 522 (0x020a) |
---|
344 | SCT Support Level: 1 |
---|
345 | Device State: Active (0) |
---|
346 | Current Temperature: 35 Celsius |
---|
347 | Power Cycle Min/Max Temperature: 35/35 Celsius |
---|
348 | Lifetime Min/Max Temperature: 22/55 Celsius |
---|
349 | Under/Over Temperature Limit Count: 0/1 |
---|
350 | SCT Temperature History Version: 2 |
---|
351 | Temperature Sampling Period: 1 minute |
---|
352 | Temperature Logging Interval: 10 minutes |
---|
353 | Min/Max recommended Temperature: 0/ 0 Celsius |
---|
354 | Min/Max Temperature Limit: 0/ 0 Celsius |
---|
355 | Temperature History Size (Index): 128 (78) |
---|
356 | |
---|
357 | Index Estimated Time Temperature Celsius |
---|
358 | 79 2013-07-23 14:50 47 **************************** |
---|
359 | 80 2013-07-23 15:00 47 **************************** |
---|
360 | 81 2013-07-23 15:10 48 ***************************** |
---|
361 | ... ..( 5 skipped). .. ***************************** |
---|
362 | 87 2013-07-23 16:10 48 ***************************** |
---|
363 | 88 2013-07-23 16:20 47 **************************** |
---|
364 | ... ..( 21 skipped). .. **************************** |
---|
365 | 110 2013-07-23 20:00 47 **************************** |
---|
366 | 111 2013-07-23 20:10 46 *************************** |
---|
367 | ... ..( 8 skipped). .. *************************** |
---|
368 | 120 2013-07-23 21:40 46 *************************** |
---|
369 | 121 2013-07-23 21:50 45 ************************** |
---|
370 | 122 2013-07-23 22:00 44 ************************* |
---|
371 | ... ..( 4 skipped). .. ************************* |
---|
372 | 127 2013-07-23 22:50 44 ************************* |
---|
373 | 0 2013-07-23 23:00 43 ************************ |
---|
374 | ... ..( 43 skipped). .. ************************ |
---|
375 | 44 2013-07-24 06:20 43 ************************ |
---|
376 | 45 2013-07-24 06:30 42 *********************** |
---|
377 | ... ..( 15 skipped). .. *********************** |
---|
378 | 61 2013-07-24 09:10 42 *********************** |
---|
379 | 62 2013-07-24 09:20 43 ************************ |
---|
380 | ... ..( 9 skipped). .. ************************ |
---|
381 | 72 2013-07-24 11:00 43 ************************ |
---|
382 | 73 2013-07-24 11:10 ? - |
---|
383 | 74 2013-07-24 11:20 43 ************************ |
---|
384 | 75 2013-07-24 11:30 ? - |
---|
385 | 76 2013-07-24 11:40 55 ************************************ |
---|
386 | 77 2013-07-24 11:50 ? - |
---|
387 | 78 2013-07-24 12:00 35 **************** |
---|
388 | |
---|
389 | SCT Error Recovery Control: |
---|
390 | Read: 100 (10.0 seconds) |
---|
391 | Write: 100 (10.0 seconds) |
---|
392 | |
---|
393 | Device Statistics (GP Log 0x04) not supported |
---|
394 | |
---|
395 | SATA Phy Event Counters (GP Log 0x11) |
---|
396 | ID Size Value Description |
---|
397 | 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET |
---|
398 | 0x0001 2 0 Command failed due to ICRC error |
---|
399 | 0x0003 2 0 R_ERR response for device-to-host data FIS |
---|
400 | 0x0004 2 0 R_ERR response for host-to-device data FIS |
---|
401 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS |
---|
402 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS |
---|
403 | |
---|