| 1 | smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.12.22+bpo-amd64] (local build)
|
|---|
| 2 | Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: d2 Quadra v3C
|
|---|
| 6 | Serial Number: WFM00BPE
|
|---|
| 7 | Firmware Version: 31AB223X
|
|---|
| 8 | User Capacity: 2,000,398,934,016 bytes [2.00 TB]
|
|---|
| 9 | Sector Size: 512 bytes logical/physical
|
|---|
| 10 | Rotation Rate: 5425 rpm
|
|---|
| 11 | Device is: Not in smartctl database 7.3/5706
|
|---|
| 12 | ATA Version is: ATA/ATAPI-6 T13/1410D revision 1
|
|---|
| 13 | SATA Version is: SATA 2.6, 3.0 Gb/s
|
|---|
| 14 | Local Time is: Wed Jun 4 22:32:35 2025 CEST
|
|---|
| 15 | SMART support is: Available - device has SMART capability.
|
|---|
| 16 | SMART support is: Enabled
|
|---|
| 17 | AAM feature is: Unavailable
|
|---|
| 18 | APM feature is: Unavailable
|
|---|
| 19 | Rd look-ahead is: Unavailable
|
|---|
| 20 | Write cache is: Enabled
|
|---|
| 21 | DSN feature is: Unavailable
|
|---|
| 22 | ATA Security is: Unavailable
|
|---|
| 23 | Wt Cache Reorder: Unavailable
|
|---|
| 24 |
|
|---|
| 25 | === START OF READ SMART DATA SECTION ===
|
|---|
| 26 | SMART Status not supported: Incomplete response, ATA output registers missing
|
|---|
| 27 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 28 | Warning: This result is based on an Attribute check.
|
|---|
| 29 |
|
|---|
| 30 | General SMART Values:
|
|---|
| 31 | Offline data collection status: (0x82) Offline data collection activity
|
|---|
| 32 | was completed without error.
|
|---|
| 33 | Auto Offline Data Collection: Enabled.
|
|---|
| 34 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 35 | without error or no self-test has ever
|
|---|
| 36 | been run.
|
|---|
| 37 | Total time to complete Offline
|
|---|
| 38 | data collection: ( 0) seconds.
|
|---|
| 39 | Offline data collection
|
|---|
| 40 | capabilities: (0x7b) SMART execute Offline immediate.
|
|---|
| 41 | Auto Offline data collection on/off support.
|
|---|
| 42 | Suspend Offline collection upon new
|
|---|
| 43 | command.
|
|---|
| 44 | Offline surface scan supported.
|
|---|
| 45 | Self-test supported.
|
|---|
| 46 | Conveyance Self-test supported.
|
|---|
| 47 | Selective Self-test supported.
|
|---|
| 48 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 49 | power-saving mode.
|
|---|
| 50 | Supports SMART auto save timer.
|
|---|
| 51 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 52 | No General Purpose Logging support.
|
|---|
| 53 | Short self-test routine
|
|---|
| 54 | recommended polling time: ( 1) minutes.
|
|---|
| 55 | Extended self-test routine
|
|---|
| 56 | recommended polling time: ( 249) minutes.
|
|---|
| 57 | Conveyance self-test routine
|
|---|
| 58 | recommended polling time: ( 2) minutes.
|
|---|
| 59 |
|
|---|
| 60 | SMART Attributes Data Structure revision number: 10
|
|---|
| 61 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 62 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 63 | 1 Raw_Read_Error_Rate POSR-- 084 065 006 - 240880681
|
|---|
| 64 | 3 Spin_Up_Time PO---- 097 097 000 - 0
|
|---|
| 65 | 4 Start_Stop_Count -O--CK 100 100 020 - 56
|
|---|
| 66 | 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
|---|
| 67 | 7 Seek_Error_Rate POSR-- 067 060 045 - 5064307
|
|---|
| 68 | 9 Power_On_Hours -O--CK 087 087 000 - 11594 (36 89 0)
|
|---|
| 69 | 10 Spin_Retry_Count PO--C- 100 100 097 - 0
|
|---|
| 70 | 12 Power_Cycle_Count -O--CK 100 100 020 - 14
|
|---|
| 71 | 183 Runtime_Bad_Block -O--CK 100 100 000 - 0
|
|---|
| 72 | 184 End-to-End_Error -O--CK 100 100 099 - 0
|
|---|
| 73 | 187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
|---|
| 74 | 188 Command_Timeout -O--CK 100 100 000 - 0
|
|---|
| 75 | 189 High_Fly_Writes -O-RCK 100 100 000 - 0
|
|---|
| 76 | 190 Airflow_Temperature_Cel -O---K 070 051 040 - 30 (Min/Max 24/30)
|
|---|
| 77 | 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
|
|---|
| 78 | 192 Power-Off_Retract_Count -O--CK 100 100 000 - 16
|
|---|
| 79 | 193 Load_Cycle_Count -O--CK 100 100 000 - 99
|
|---|
| 80 | 194 Temperature_Celsius -O---K 030 049 000 - 30 (0 22 0 0 0)
|
|---|
| 81 | 195 Hardware_ECC_Recovered -O-RC- 084 065 000 - 240880681
|
|---|
| 82 | 197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
|---|
| 83 | 198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
|---|
| 84 | 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
|
|---|
| 85 | 240 Head_Flying_Hours ------ 100 253 000 - 62 (243 228 0)
|
|---|
| 86 | 241 Total_LBAs_Written ------ 100 253 000 - 8809479983
|
|---|
| 87 | 242 Total_LBAs_Read ------ 100 253 000 - 28593050
|
|---|
| 88 | ||||||_ K auto-keep
|
|---|
| 89 | |||||__ C event count
|
|---|
| 90 | ||||___ R error rate
|
|---|
| 91 | |||____ S speed/performance
|
|---|
| 92 | ||_____ O updated online
|
|---|
| 93 | |______ P prefailure warning
|
|---|
| 94 |
|
|---|
| 95 | General Purpose Log Directory not supported
|
|---|
| 96 |
|
|---|
| 97 | SMART Log Directory Version 0
|
|---|
| 98 | Address Access R/W Size Description
|
|---|
| 99 | 0x00 SL R/O 1 Log Directory
|
|---|
| 100 |
|
|---|
| 101 | SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
|---|
| 102 |
|
|---|
| 103 | SMART Error Log Version: 0
|
|---|
| 104 | No Errors Logged
|
|---|
| 105 |
|
|---|
| 106 | SMART Extended Self-test Log (GP Log 0x07) not supported
|
|---|
| 107 |
|
|---|
| 108 | SMART Self-test log structure revision number 0
|
|---|
| 109 | Warning: ATA Specification requires self-test log structure revision number = 1
|
|---|
| 110 | No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|---|
| 111 |
|
|---|
| 112 | SMART Selective self-test log data structure revision number 0
|
|---|
| 113 | Note: revision number not 1 implies that no selective self-test has ever been run
|
|---|
| 114 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 115 | 1 0 0 Not_testing
|
|---|
| 116 | 2 0 0 Not_testing
|
|---|
| 117 | 3 0 0 Not_testing
|
|---|
| 118 | 4 0 0 Not_testing
|
|---|
| 119 | 5 0 0 Not_testing
|
|---|
| 120 | Selective self-test flags (0x0):
|
|---|
| 121 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 122 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 123 |
|
|---|
| 124 | SCT Commands not supported
|
|---|
| 125 |
|
|---|
| 126 | Device Statistics (GP/SMART Log 0x04) not supported
|
|---|
| 127 |
|
|---|
| 128 | Pending Defects log (GP Log 0x0c) not supported
|
|---|
| 129 |
|
|---|
| 130 | SATA Phy Event Counters (GP Log 0x11) not supported
|
|---|
| 131 |
|
|---|
