| 1 | $ smartctl -x -d sat /dev/sdb
|
|---|
| 2 | smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.5.9-200.fc38.x86_64] (local build)
|
|---|
| 3 | Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 4 |
|
|---|
| 5 | === START OF INFORMATION SECTION ===
|
|---|
| 6 | Device Model: TS512GESD310C
|
|---|
| 7 | Serial Number: REDACTED
|
|---|
| 8 | LU WWN Device Id: 0 000000 000000000
|
|---|
| 9 | Firmware Version: W0629DM0
|
|---|
| 10 | User Capacity: 512 110 190 080 bytes [512 GB]
|
|---|
| 11 | Sector Size: 512 bytes logical/physical
|
|---|
| 12 | Rotation Rate: Solid State Device
|
|---|
| 13 | TRIM Command: Available
|
|---|
| 14 | Device is: Not in smartctl database 7.3/5533
|
|---|
| 15 | ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
|
|---|
| 16 | SATA Version is: SATA 3.1, >6.0 Gb/s (4)
|
|---|
| 17 | Local Time is: Sun Nov 5 16:43:34 2023 CET
|
|---|
| 18 | SMART support is: Available - device has SMART capability.
|
|---|
| 19 | SMART support is: Enabled
|
|---|
| 20 | AAM feature is: Unavailable
|
|---|
| 21 | APM feature is: Unavailable
|
|---|
| 22 | Rd look-ahead is: Enabled
|
|---|
| 23 | Write cache is: Enabled
|
|---|
| 24 | DSN feature is: Unavailable
|
|---|
| 25 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|---|
| 26 | Wt Cache Reorder: Unavailable
|
|---|
| 27 |
|
|---|
| 28 | Warning! SMART Attribute Data Structure error: invalid SMART checksum.
|
|---|
| 29 | Warning! SMART Attribute Thresholds Structure error: invalid SMART checksum.
|
|---|
| 30 | === START OF READ SMART DATA SECTION ===
|
|---|
| 31 | SMART Status command failed: scsi error unsupported scsi opcode
|
|---|
| 32 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 33 | Warning: This result is based on an Attribute check.
|
|---|
| 34 |
|
|---|
| 35 | General SMART Values:
|
|---|
| 36 | Offline data collection status: (0x00) Offline data collection activity
|
|---|
| 37 | was never started.
|
|---|
| 38 | Auto Offline Data Collection: Disabled.
|
|---|
| 39 | Total time to complete Offline
|
|---|
| 40 | data collection: ( 0) seconds.
|
|---|
| 41 | Offline data collection
|
|---|
| 42 | capabilities: (0x00) Offline data collection not supported.
|
|---|
| 43 | SMART capabilities: (0x0000) Automatic saving of SMART data is not implemented.
|
|---|
| 44 | Error logging capability: (0x00) Error logging supported.
|
|---|
| 45 | General Purpose Logging supported.
|
|---|
| 46 |
|
|---|
| 47 | SMART Attributes Data Structure revision number: 1
|
|---|
| 48 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 49 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 50 | 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 0
|
|---|
| 51 | 9 Power_On_Hours -O--CK 100 100 000 - 1
|
|---|
| 52 | 12 Power_Cycle_Count -O--CK 100 100 000 - 4
|
|---|
| 53 | 161 Unknown_Attribute ------ 100 100 000 - 100
|
|---|
| 54 | 169 Unknown_Attribute ------ 100 100 000 - 100
|
|---|
| 55 | 172 Unknown_Attribute -O--CK 100 100 000 - 0
|
|---|
| 56 | 181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0
|
|---|
| 57 | 187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
|---|
| 58 | 192 Power-Off_Retract_Count -O---K 100 100 000 - 4
|
|---|
| 59 | 194 Temperature_Celsius -O--CK 039 039 000 - 39 (Min/Max 0/39)
|
|---|
| 60 | 196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
|---|
| 61 | 218 Unknown_Attribute ------ 100 100 000 - 0
|
|---|
| 62 | 231 Unknown_SSD_Attribute -O--CK 100 100 000 - 100
|
|---|
| 63 | 233 Media_Wearout_Indicator -O--CK 100 100 000 - 351
|
|---|
| 64 | 241 Total_LBAs_Written -O--CK 100 100 000 - 350
|
|---|
| 65 | 242 Total_LBAs_Read ------ 100 100 000 - 311
|
|---|
| 66 | 244 Unknown_Attribute ------ 100 100 000 - 0
|
|---|
| 67 | 245 Unknown_Attribute ------ 100 100 000 - 0
|
|---|
| 68 | 246 Unknown_Attribute ------ 100 100 000 - 0
|
|---|
| 69 | ||||||_ K auto-keep
|
|---|
| 70 | |||||__ C event count
|
|---|
| 71 | ||||___ R error rate
|
|---|
| 72 | |||____ S speed/performance
|
|---|
| 73 | ||_____ O updated online
|
|---|
| 74 | |______ P prefailure warning
|
|---|
| 75 |
|
|---|
| 76 | Read SMART Log Directory failed: scsi error unsupported scsi opcode
|
|---|
| 77 |
|
|---|
| 78 | ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: scsi error unsupported scsi opcode
|
|---|
| 79 | Read GP Log Directory failed
|
|---|
| 80 |
|
|---|
| 81 | SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
|---|
| 82 |
|
|---|
| 83 | Read SMART Error Log failed: scsi error unsupported scsi opcode
|
|---|
| 84 |
|
|---|
| 85 | SMART Extended Self-test Log (GP Log 0x07) not supported
|
|---|
| 86 |
|
|---|
| 87 | Read SMART Self-test Log failed: scsi error unsupported scsi opcode
|
|---|
| 88 |
|
|---|
| 89 | Selective Self-tests/Logging not supported
|
|---|
| 90 |
|
|---|
| 91 | SCT Commands not supported
|
|---|
| 92 |
|
|---|
| 93 | Device Statistics (GP/SMART Log 0x04) not supported
|
|---|
| 94 |
|
|---|
| 95 | Pending Defects log (GP Log 0x0c) not supported
|
|---|
| 96 |
|
|---|
| 97 | ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: scsi error unsupported scsi opcode
|
|---|
| 98 | Read SATA Phy Event Counters failed
|
|---|
| 99 |
|
|---|
