| 1 | smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.19.0-32-generic] (local build)
|
|---|
| 2 | Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: SAMSUNG HD322GJ
|
|---|
| 6 | Firmware Version: 1AR10001
|
|---|
| 7 | User Capacity: 320 072 933 376 bytes [320 GB]
|
|---|
| 8 | Sector Size: 512 bytes logical/physical
|
|---|
| 9 | Rotation Rate: 7200 rpm
|
|---|
| 10 | Form Factor: 3.5 inches
|
|---|
| 11 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 12 | ATA Version is: ATA8-ACS T13/1699-D revision 6
|
|---|
| 13 | SATA Version is: SATA 2.6, 3.0 Gb/s
|
|---|
| 14 | Local Time is: Wed Sep 13 01:29:49 2023 CEST
|
|---|
| 15 | SMART support is: Available - device has SMART capability.
|
|---|
| 16 | SMART support is: Enabled
|
|---|
| 17 | AAM feature is: Disabled
|
|---|
| 18 | APM feature is: Disabled
|
|---|
| 19 | Rd look-ahead is: Enabled
|
|---|
| 20 | Write cache is: Enabled
|
|---|
| 21 | DSN feature is: Unavailable
|
|---|
| 22 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|---|
| 23 | Write SCT (Get) Feature Control Command failed: Read of ATA output registers not implemented [JMicron]
|
|---|
| 24 | Wt Cache Reorder: Unknown (SCT Feature Control command failed)
|
|---|
| 25 |
|
|---|
| 26 | === START OF READ SMART DATA SECTION ===
|
|---|
| 27 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 28 |
|
|---|
| 29 | General SMART Values:
|
|---|
| 30 | Offline data collection status: (0x00) Offline data collection activity
|
|---|
| 31 | was never started.
|
|---|
| 32 | Auto Offline Data Collection: Disabled.
|
|---|
| 33 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 34 | without error or no self-test has ever
|
|---|
| 35 | been run.
|
|---|
| 36 | Total time to complete Offline
|
|---|
| 37 | data collection: ( 2880) seconds.
|
|---|
| 38 | Offline data collection
|
|---|
| 39 | capabilities: (0x5b) SMART execute Offline immediate.
|
|---|
| 40 | Auto Offline data collection on/off support.
|
|---|
| 41 | Suspend Offline collection upon new
|
|---|
| 42 | command.
|
|---|
| 43 | Offline surface scan supported.
|
|---|
| 44 | Self-test supported.
|
|---|
| 45 | No Conveyance Self-test supported.
|
|---|
| 46 | Selective Self-test supported.
|
|---|
| 47 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 48 | power-saving mode.
|
|---|
| 49 | Supports SMART auto save timer.
|
|---|
| 50 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 51 | General Purpose Logging supported.
|
|---|
| 52 | Short self-test routine
|
|---|
| 53 | recommended polling time: ( 2) minutes.
|
|---|
| 54 | Extended self-test routine
|
|---|
| 55 | recommended polling time: ( 48) minutes.
|
|---|
| 56 | SCT capabilities: (0x003f) SCT Status supported.
|
|---|
| 57 | SCT Error Recovery Control supported.
|
|---|
| 58 | SCT Feature Control supported.
|
|---|
| 59 | SCT Data Table supported.
|
|---|
| 60 |
|
|---|
| 61 | SMART Attributes Data Structure revision number: 16
|
|---|
| 62 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 63 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 64 | 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 104
|
|---|
| 65 | 2 Throughput_Performance -OS--K 053 053 000 - 2808
|
|---|
| 66 | 3 Spin_Up_Time PO---K 074 073 025 - 8042
|
|---|
| 67 | 4 Start_Stop_Count -O--CK 096 096 000 - 4807
|
|---|
| 68 | 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0
|
|---|
| 69 | 7 Seek_Error_Rate -OSR-K 252 252 051 - 0
|
|---|
| 70 | 8 Seek_Time_Performance --S--K 252 252 015 - 0
|
|---|
| 71 | 9 Power_On_Hours -O--CK 100 100 000 - 80863
|
|---|
| 72 | 10 Spin_Retry_Count -O--CK 252 252 051 - 0
|
|---|
| 73 | 11 Calibration_Retry_Count -O--CK 252 252 000 - 0
|
|---|
| 74 | 12 Power_Cycle_Count -O--CK 100 100 000 - 759
|
|---|
| 75 | 191 G-Sense_Error_Rate -O---K 100 100 000 - 6660
|
|---|
| 76 | 192 Power-Off_Retract_Count -O---K 252 252 000 - 0
|
|---|
| 77 | 194 Temperature_Celsius -O---- 064 055 000 - 35 (Min/Max -3/45)
|
|---|
| 78 | 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0
|
|---|
| 79 | 196 Reallocated_Event_Count -O--CK 252 252 000 - 0
|
|---|
| 80 | 197 Current_Pending_Sector -O--CK 252 100 000 - 0
|
|---|
| 81 | 198 Offline_Uncorrectable ----CK 252 252 000 - 0
|
|---|
| 82 | 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 1
|
|---|
| 83 | 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 46
|
|---|
| 84 | 223 Load_Retry_Count -O--CK 252 252 000 - 0
|
|---|
| 85 | 225 Load_Cycle_Count -O--CK 100 100 000 - 4955
|
|---|
| 86 | ||||||_ K auto-keep
|
|---|
| 87 | |||||__ C event count
|
|---|
| 88 | ||||___ R error rate
|
|---|
| 89 | |||____ S speed/performance
|
|---|
| 90 | ||_____ O updated online
|
|---|
| 91 | |______ P prefailure warning
|
|---|
| 92 |
|
|---|
| 93 | ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented [JMicron]
|
|---|
| 94 | Read GP Log Directory failed
|
|---|
| 95 |
|
|---|
| 96 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 97 | Address Access R/W Size Description
|
|---|
| 98 | 0x00 SL R/O 1 Log Directory
|
|---|
| 99 | 0x01 SL R/O 1 Summary SMART error log
|
|---|
| 100 | 0x02 SL R/O 2 Comprehensive SMART error log
|
|---|
| 101 | 0x06 SL R/O 1 SMART self-test log
|
|---|
| 102 | 0x09 SL R/W 1 Selective self-test log
|
|---|
| 103 | 0x80-0x9f SL R/W 16 Host vendor specific log
|
|---|
| 104 | 0xe0 SL R/W 1 SCT Command/Status
|
|---|
| 105 | 0xe1 SL R/W 1 SCT Data Transfer
|
|---|
| 106 |
|
|---|
| 107 | SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
|---|
| 108 |
|
|---|
| 109 | SMART Error Log Version: 1
|
|---|
| 110 | ATA Error Count: 9 (device log contains only the most recent five errors)
|
|---|
| 111 | CR = Command Register [HEX]
|
|---|
| 112 | FR = Features Register [HEX]
|
|---|
| 113 | SC = Sector Count Register [HEX]
|
|---|
| 114 | SN = Sector Number Register [HEX]
|
|---|
| 115 | CL = Cylinder Low Register [HEX]
|
|---|
| 116 | CH = Cylinder High Register [HEX]
|
|---|
| 117 | DH = Device/Head Register [HEX]
|
|---|
| 118 | DC = Device Command Register [HEX]
|
|---|
| 119 | ER = Error register [HEX]
|
|---|
| 120 | ST = Status register [HEX]
|
|---|
| 121 | Powered_Up_Time is measured from power on, and printed as
|
|---|
| 122 | DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
|---|
| 123 | SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
|---|
| 124 |
|
|---|
| 125 | Error 9 occurred at disk power-on lifetime: 33869 hours (1411 days + 5 hours)
|
|---|
| 126 | When the command that caused the error occurred, the device was active or idle.
|
|---|
| 127 |
|
|---|
| 128 | After command completion occurred, registers were:
|
|---|
| 129 | ER ST SC SN CL CH DH
|
|---|
| 130 | -- -- -- -- -- -- --
|
|---|
| 131 | 40 51 06 ca 16 27 e3 Error: UNC 6 sectors at LBA = 0x032716ca = 52893386
|
|---|
| 132 |
|
|---|
| 133 | Commands leading to the command that caused the error were:
|
|---|
| 134 | CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|---|
| 135 | -- -- -- -- -- -- -- -- ---------------- --------------------
|
|---|
| 136 | c8 00 08 c8 16 27 e3 00 00:00:00.688 READ DMA
|
|---|
| 137 | 27 00 00 00 00 00 e0 00 00:00:00.688 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
|---|
| 138 | ec 00 00 00 00 00 a0 00 00:00:00.688 IDENTIFY DEVICE
|
|---|
| 139 | ef 03 42 00 00 00 a0 00 00:00:00.688 SET FEATURES [Set transfer mode]
|
|---|
| 140 | 27 00 00 00 00 00 e0 00 00:00:00.688 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
|---|
| 141 |
|
|---|
| 142 | Error 8 occurred at disk power-on lifetime: 33869 hours (1411 days + 5 hours)
|
|---|
| 143 | When the command that caused the error occurred, the device was active or idle.
|
|---|
| 144 |
|
|---|
| 145 | After command completion occurred, registers were:
|
|---|
| 146 | ER ST SC SN CL CH DH
|
|---|
| 147 | -- -- -- -- -- -- --
|
|---|
| 148 | 40 51 06 ca 16 27 e3 Error: UNC 6 sectors at LBA = 0x032716ca = 52893386
|
|---|
| 149 |
|
|---|
| 150 | Commands leading to the command that caused the error were:
|
|---|
| 151 | CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|---|
| 152 | -- -- -- -- -- -- -- -- ---------------- --------------------
|
|---|
| 153 | c8 00 08 c8 16 27 e3 00 00:00:00.686 READ DMA
|
|---|
| 154 | c8 00 00 00 17 27 e3 00 00:00:00.686 READ DMA
|
|---|
| 155 | 27 00 00 00 00 00 e0 00 00:00:00.686 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
|---|
| 156 | ec 00 00 00 00 00 a0 00 00:00:00.686 IDENTIFY DEVICE
|
|---|
| 157 | ef 03 42 00 00 00 a0 00 00:00:00.686 SET FEATURES [Set transfer mode]
|
|---|
| 158 |
|
|---|
| 159 | Error 7 occurred at disk power-on lifetime: 33869 hours (1411 days + 5 hours)
|
|---|
| 160 | When the command that caused the error occurred, the device was active or idle.
|
|---|
| 161 |
|
|---|
| 162 | After command completion occurred, registers were:
|
|---|
| 163 | ER ST SC SN CL CH DH
|
|---|
| 164 | -- -- -- -- -- -- --
|
|---|
| 165 | 40 51 36 ca 16 27 e3 Error: UNC 54 sectors at LBA = 0x032716ca = 52893386
|
|---|
| 166 |
|
|---|
| 167 | Commands leading to the command that caused the error were:
|
|---|
| 168 | CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|---|
| 169 | -- -- -- -- -- -- -- -- ---------------- --------------------
|
|---|
| 170 | c8 00 00 00 16 27 e3 00 00:00:00.684 READ DMA
|
|---|
| 171 | c8 00 00 00 15 27 e3 00 00:00:00.684 READ DMA
|
|---|
| 172 | c8 00 00 00 14 27 e3 00 00:00:00.684 READ DMA
|
|---|
| 173 | c8 00 00 00 13 27 e3 00 00:00:00.684 READ DMA
|
|---|
| 174 | c8 00 00 00 12 27 e3 00 00:00:00.684 READ DMA
|
|---|
| 175 |
|
|---|
| 176 | Error 6 occurred at disk power-on lifetime: 33571 hours (1398 days + 19 hours)
|
|---|
| 177 | When the command that caused the error occurred, the device was active or idle.
|
|---|
| 178 |
|
|---|
| 179 | After command completion occurred, registers were:
|
|---|
| 180 | ER ST SC SN CL CH DH
|
|---|
| 181 | -- -- -- -- -- -- --
|
|---|
| 182 | 40 51 01 ca 16 27 e3 Error: UNC 1 sectors at LBA = 0x032716ca = 52893386
|
|---|
| 183 |
|
|---|
| 184 | Commands leading to the command that caused the error were:
|
|---|
| 185 | CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|---|
| 186 | -- -- -- -- -- -- -- -- ---------------- --------------------
|
|---|
| 187 | c8 00 01 ca 16 27 e3 00 00:01:25.539 READ DMA
|
|---|
| 188 | 27 00 00 00 00 00 e0 00 00:01:25.539 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
|---|
| 189 | ec 00 00 00 00 00 a0 00 00:01:25.539 IDENTIFY DEVICE
|
|---|
| 190 | ef 03 42 00 00 00 a0 00 00:01:25.539 SET FEATURES [Set transfer mode]
|
|---|
| 191 | 27 00 00 00 00 00 e0 00 00:01:25.539 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
|
|---|
| 192 |
|
|---|
| 193 | Error 5 occurred at disk power-on lifetime: 33571 hours (1398 days + 19 hours)
|
|---|
| 194 | When the command that caused the error occurred, the device was active or idle.
|
|---|
| 195 |
|
|---|
| 196 | After command completion occurred, registers were:
|
|---|
| 197 | ER ST SC SN CL CH DH
|
|---|
| 198 | -- -- -- -- -- -- --
|
|---|
| 199 | 40 51 06 ca 16 27 e3 Error: UNC 6 sectors at LBA = 0x032716ca = 52893386
|
|---|
| 200 |
|
|---|
| 201 | Commands leading to the command that caused the error were:
|
|---|
| 202 | CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|---|
| 203 | -- -- -- -- -- -- -- -- ---------------- --------------------
|
|---|
| 204 | c8 00 06 ca 16 27 e3 00 00:01:25.538 READ DMA
|
|---|
| 205 | c8 00 01 c9 16 27 e3 00 00:01:25.538 READ DMA
|
|---|
| 206 | c8 00 01 c8 16 27 e3 00 00:01:25.537 READ DMA
|
|---|
| 207 | c8 00 06 c2 16 27 e3 00 00:01:25.537 READ DMA
|
|---|
| 208 | c8 00 01 c1 16 27 e3 00 00:01:25.537 READ DMA
|
|---|
| 209 |
|
|---|
| 210 | SMART Extended Self-test Log (GP Log 0x07) not supported
|
|---|
| 211 |
|
|---|
| 212 | SMART Self-test log structure revision number 1
|
|---|
| 213 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 214 | # 1 Short offline Completed without error 00% 15327 -
|
|---|
| 215 | # 2 Extended offline Completed without error 00% 15327 -
|
|---|
| 216 |
|
|---|
| 217 | SMART Selective self-test log data structure revision number 0
|
|---|
| 218 | Note: revision number not 1 implies that no selective self-test has ever been run
|
|---|
| 219 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 220 | 1 0 0 Completed [00% left] (0-65535)
|
|---|
| 221 | 2 0 0 Not_testing
|
|---|
| 222 | 3 0 0 Not_testing
|
|---|
| 223 | 4 0 0 Not_testing
|
|---|
| 224 | 5 0 0 Not_testing
|
|---|
| 225 | Selective self-test flags (0x0):
|
|---|
| 226 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 227 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 228 |
|
|---|
| 229 | SCT Status Version: 2
|
|---|
| 230 | SCT Version (vendor specific): 256 (0x0100)
|
|---|
| 231 | Device State: Active (0)
|
|---|
| 232 | Current Temperature: 35 Celsius
|
|---|
| 233 | Power Cycle Min/Max Temperature: 20/35 Celsius
|
|---|
| 234 | Lifetime Min/Max Temperature: -2/45 Celsius
|
|---|
| 235 | Specified Max Operating Temperature: 80 Celsius
|
|---|
| 236 | Under/Over Temperature Limit Count: 0/0
|
|---|
| 237 |
|
|---|
| 238 | SCT Temperature History Version: 2
|
|---|
| 239 | Temperature Sampling Period: 5 minutes
|
|---|
| 240 | Temperature Logging Interval: 5 minutes
|
|---|
| 241 | Min/Max recommended Temperature: -5/80 Celsius
|
|---|
| 242 | Min/Max Temperature Limit: -10/85 Celsius
|
|---|
| 243 | Temperature History Size (Index): 128 (34)
|
|---|
| 244 |
|
|---|
| 245 | Index Estimated Time Temperature Celsius
|
|---|
| 246 | 35 2023-09-12 14:50 35 ****************
|
|---|
| 247 | 36 2023-09-12 14:55 32 *************
|
|---|
| 248 | ... ..( 34 skipped). .. *************
|
|---|
| 249 | 71 2023-09-12 17:50 32 *************
|
|---|
| 250 | 72 2023-09-12 17:55 31 ************
|
|---|
| 251 | 73 2023-09-12 18:00 31 ************
|
|---|
| 252 | 74 2023-09-12 18:05 31 ************
|
|---|
| 253 | 75 2023-09-12 18:10 32 *************
|
|---|
| 254 | ... ..( 64 skipped). .. *************
|
|---|
| 255 | 12 2023-09-12 23:35 32 *************
|
|---|
| 256 | 13 2023-09-12 23:40 33 **************
|
|---|
| 257 | 14 2023-09-12 23:45 33 **************
|
|---|
| 258 | 15 2023-09-12 23:50 36 *****************
|
|---|
| 259 | 16 2023-09-12 23:55 35 ****************
|
|---|
| 260 | 17 2023-09-13 00:00 34 ***************
|
|---|
| 261 | 18 2023-09-13 00:05 23 ****
|
|---|
| 262 | 19 2023-09-13 00:10 25 ******
|
|---|
| 263 | 20 2023-09-13 00:15 27 ********
|
|---|
| 264 | 21 2023-09-13 00:20 29 **********
|
|---|
| 265 | 22 2023-09-13 00:25 30 ***********
|
|---|
| 266 | 23 2023-09-13 00:30 32 *************
|
|---|
| 267 | 24 2023-09-13 00:35 33 **************
|
|---|
| 268 | 25 2023-09-13 00:40 34 ***************
|
|---|
| 269 | 26 2023-09-13 00:45 34 ***************
|
|---|
| 270 | 27 2023-09-13 00:50 35 ****************
|
|---|
| 271 | ... ..( 2 skipped). .. ****************
|
|---|
| 272 | 30 2023-09-13 01:05 35 ****************
|
|---|
| 273 | 31 2023-09-13 01:10 34 ***************
|
|---|
| 274 | 32 2023-09-13 01:15 34 ***************
|
|---|
| 275 | 33 2023-09-13 01:20 33 **************
|
|---|
| 276 | 34 2023-09-13 01:25 35 ****************
|
|---|
| 277 |
|
|---|
| 278 | Write SCT (Get) Error Recovery Control Command failed: Read of ATA output registers not implemented [JMicron]
|
|---|
| 279 | SCT (Get) Error Recovery Control command failed
|
|---|
| 280 |
|
|---|
| 281 | Device Statistics (GP/SMART Log 0x04) not supported
|
|---|
| 282 |
|
|---|
| 283 | Pending Defects log (GP Log 0x0c) not supported
|
|---|
| 284 |
|
|---|
| 285 | ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented [JMicron]
|
|---|
| 286 | Read SATA Phy Event Counters failed
|
|---|
| 287 |
|
|---|
