Ticket #1744: hdparm_I.txt

File hdparm_I.txt, 2.8 KB (added by 647581, 9 months ago)
Line 
1
2/dev/disk/by-id/ata-AMD_R5SL512G_07122223F0051:
3
4ATA device, with non-removable media
5 Model Number: AMD R5SL512G
6 Serial Number: 07122223F0051
7 Firmware Revision: V0929A0
8 Media Serial Num:
9 Media Manufacturer:
10 Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
11Standards:
12 Supported: 11 10 9 8 7 6 5
13 Likely used: 11
14Configuration:
15 Logical max current
16 cylinders 16383 16383
17 heads 16 16
18 sectors/track 63 63
19 --
20 CHS current addressable sectors: 16514064
21 LBA user addressable sectors: 268435455
22 LBA48 user addressable sectors: 1000215216
23 Logical Sector size: 512 bytes
24 Physical Sector size: 512 bytes
25 Logical Sector-0 offset: 0 bytes
26 device size with M = 1024*1024: 488386 MBytes
27 device size with M = 1000*1000: 512110 MBytes (512 GB)
28 cache/buffer size = unknown
29 Form Factor: 2.5 inch
30 Nominal Media Rotation Rate: Solid State Device
31Capabilities:
32 LBA, IORDY(can be disabled)
33 Queue depth: 32
34 Standby timer values: spec'd by Standard, no device specific minimum
35 R/W multiple sector transfer: Max = 1 Current = 1
36 Advanced power management level: 254
37 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
38 Cycle time: min=120ns recommended=120ns
39 PIO: pio0 pio1 pio2 pio3 pio4
40 Cycle time: no flow control=120ns IORDY flow control=120ns
41Commands/features:
42 Enabled Supported:
43 * SMART feature set
44 Security Mode feature set
45 * Power Management feature set
46 * Write cache
47 * Look-ahead
48 * Host Protected Area feature set
49 * WRITE_BUFFER command
50 * READ_BUFFER command
51 * DOWNLOAD_MICROCODE
52 * Advanced Power Management feature set
53 SET_MAX security extension
54 * 48-bit Address feature set
55 * Mandatory FLUSH_CACHE
56 * FLUSH_CACHE_EXT
57 * SMART error logging
58 * SMART self-test
59 * General Purpose Logging feature set
60 * WRITE_{DMA|MULTIPLE}_FUA_EXT
61 * {READ,WRITE}_DMA_EXT_GPL commands
62 * Segmented DOWNLOAD_MICROCODE
63 * Gen1 signaling speed (1.5Gb/s)
64 * Gen2 signaling speed (3.0Gb/s)
65 * Gen3 signaling speed (6.0Gb/s)
66 * Native Command Queueing (NCQ)
67 * Phy event counters
68 * READ_LOG_DMA_EXT equivalent to READ_LOG_EXT
69 * DMA Setup Auto-Activate optimization
70 * Software settings preservation
71 * SMART Command Transport (SCT) feature set
72 * SANITIZE feature set
73 * BLOCK_ERASE_EXT command
74 * DOWNLOAD MICROCODE DMA command
75 * WRITE BUFFER DMA command
76 * READ BUFFER DMA command
77 * Data Set Management TRIM supported (limit 8 blocks)
78Security:
79 Master password revision code = 65534
80 supported
81 not enabled
82 not locked
83 not frozen
84 not expired: security count
85 supported: enhanced erase
86 2min for SECURITY ERASE UNIT. 2min for ENHANCED SECURITY ERASE UNIT.
87Checksum: correct