1 | smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-23-amd64] (local build)
|
---|
2 | Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Device Model: SanDisk Portable SSD
|
---|
6 | Serial Number: 23191M441707
|
---|
7 | LU WWN Device Id: 5 001b44 4a583546a
|
---|
8 | Firmware Version: UM5004RL
|
---|
9 | User Capacity: 2.000.398.934.016 bytes [2,00 TB]
|
---|
10 | Sector Size: 512 bytes logical/physical
|
---|
11 | Rotation Rate: Solid State Device
|
---|
12 | Form Factor: M.2
|
---|
13 | TRIM Command: Available, deterministic
|
---|
14 | Device is: Not in smartctl database [for details use: -P showall]
|
---|
15 | ATA Version is: ACS-3, ACS-2 T13/2015-D revision 3
|
---|
16 | SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
---|
17 | Local Time is: Sat Sep 2 15:24:34 2023 CEST
|
---|
18 | SMART support is: Available - device has SMART capability.
|
---|
19 | SMART support is: Enabled
|
---|
20 | AAM feature is: Unavailable
|
---|
21 | APM feature is: Disabled
|
---|
22 | Rd look-ahead is: Enabled
|
---|
23 | Write cache is: Enabled
|
---|
24 | DSN feature is: Unavailable
|
---|
25 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
---|
26 | Wt Cache Reorder: Unavailable
|
---|
27 |
|
---|
28 | === START OF READ SMART DATA SECTION ===
|
---|
29 | SMART overall-health self-assessment test result: PASSED
|
---|
30 |
|
---|
31 | General SMART Values:
|
---|
32 | Offline data collection status: (0x00) Offline data collection activity
|
---|
33 | was never started.
|
---|
34 | Auto Offline Data Collection: Disabled.
|
---|
35 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
36 | without error or no self-test has ever
|
---|
37 | been run.
|
---|
38 | Total time to complete Offline
|
---|
39 | data collection: ( 120) seconds.
|
---|
40 | Offline data collection
|
---|
41 | capabilities: (0x11) SMART execute Offline immediate.
|
---|
42 | No Auto Offline data collection support.
|
---|
43 | Suspend Offline collection upon new
|
---|
44 | command.
|
---|
45 | No Offline surface scan supported.
|
---|
46 | Self-test supported.
|
---|
47 | No Conveyance Self-test supported.
|
---|
48 | No Selective Self-test supported.
|
---|
49 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
50 | power-saving mode.
|
---|
51 | Supports SMART auto save timer.
|
---|
52 | Error logging capability: (0x01) Error logging supported.
|
---|
53 | General Purpose Logging supported.
|
---|
54 | Short self-test routine
|
---|
55 | recommended polling time: ( 2) minutes.
|
---|
56 | Extended self-test routine
|
---|
57 | recommended polling time: ( 255) minutes.
|
---|
58 |
|
---|
59 | SMART Attributes Data Structure revision number: 1
|
---|
60 | Vendor Specific SMART Attributes with Thresholds:
|
---|
61 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
---|
62 | 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0
|
---|
63 | 9 Power_On_Hours -O--CK 100 100 000 - 2
|
---|
64 | 12 Power_Cycle_Count -O--CK 100 100 000 - 11
|
---|
65 | 165 Unknown_Attribute -O--CK 100 100 000 - 0
|
---|
66 | 166 Unknown_Attribute -O--CK 100 100 --- - 0
|
---|
67 | 167 Unknown_Attribute -O--CK 100 100 --- - 54
|
---|
68 | 168 Unknown_Attribute -O--CK 100 100 --- - 0
|
---|
69 | 169 Unknown_Attribute -O--CK 100 100 --- - 1039
|
---|
70 | 170 Unknown_Attribute -O--CK 100 100 --- - 0
|
---|
71 | 171 Unknown_Attribute -O--CK 100 100 000 - 0
|
---|
72 | 172 Unknown_Attribute -O--CK 100 100 000 - 0
|
---|
73 | 173 Unknown_Attribute -O--CK 100 100 000 - 0
|
---|
74 | 174 Unknown_Attribute -O--CK 100 100 000 - 6
|
---|
75 | 184 End-to-End_Error -O--CK 100 100 --- - 0
|
---|
76 | 187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
---|
77 | 188 Command_Timeout -O--CK 100 100 --- - 0
|
---|
78 | 194 Temperature_Celsius -O---K 057 047 000 - 43 (Min/Max 20/47)
|
---|
79 | 199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0
|
---|
80 | 230 Unknown_SSD_Attribute -O--CK 100 100 000 - 0
|
---|
81 | 232 Available_Reservd_Space PO--CK 100 100 005 - 100
|
---|
82 | 233 Media_Wearout_Indicator -O--CK 100 100 --- - 0
|
---|
83 | 234 Unknown_Attribute -O--CK 100 100 000 - 0
|
---|
84 | 241 Total_LBAs_Written ----CK 100 100 000 - 0
|
---|
85 | 242 Total_LBAs_Read ----CK 100 100 000 - 0
|
---|
86 | 244 Unknown_Attribute -O--CK 000 100 --- - 0
|
---|
87 | ||||||_ K auto-keep
|
---|
88 | |||||__ C event count
|
---|
89 | ||||___ R error rate
|
---|
90 | |||____ S speed/performance
|
---|
91 | ||_____ O updated online
|
---|
92 | |______ P prefailure warning
|
---|
93 |
|
---|
94 | General Purpose Log Directory Version 1
|
---|
95 | SMART Log Directory Version 1 [multi-sector log support]
|
---|
96 | Address Access R/W Size Description
|
---|
97 | 0x00 GPL,SL R/O 1 Log Directory
|
---|
98 | 0x01 SL R/O 1 Summary SMART error log
|
---|
99 | 0x02 SL R/O 1 Comprehensive SMART error log
|
---|
100 | 0x03 GPL R/O 16 Ext. Comprehensive SMART error log
|
---|
101 | 0x04 GPL,SL R/O 8 Device Statistics log
|
---|
102 | 0x06 SL R/O 1 SMART self-test log
|
---|
103 | 0x07 GPL R/O 1 Extended self-test log
|
---|
104 | 0x10 GPL R/O 1 NCQ Command Error log
|
---|
105 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
---|
106 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
---|
107 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
---|
108 | 0xa1 GPL,SL VS 1 Device vendor specific log
|
---|
109 | 0xa2 GPL,SL VS 2 Device vendor specific log
|
---|
110 | 0xa3-0xa4 GPL,SL VS 1 Device vendor specific log
|
---|
111 | 0xa7 GPL,SL VS 1 Device vendor specific log
|
---|
112 | 0xa9 GPL,SL VS 4 Device vendor specific log
|
---|
113 |
|
---|
114 | Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum.
|
---|
115 | SMART Extended Comprehensive Error Log Version: 1 (16 sectors)
|
---|
116 | No Errors Logged
|
---|
117 |
|
---|
118 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
---|
119 | No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
---|
120 |
|
---|
121 | Selective Self-tests/Logging not supported
|
---|
122 |
|
---|
123 | SCT Commands not supported
|
---|
124 |
|
---|
125 | Device Statistics (GP Log 0x04)
|
---|
126 | Page Offset Size Value Flags Description
|
---|
127 | 0x01 ===== = = === == General Statistics (rev 1) ==
|
---|
128 | 0x01 0x008 4 11 --- Lifetime Power-On Resets
|
---|
129 | 0x01 0x010 4 2 --- Power-on Hours
|
---|
130 | 0x01 0x018 6 4181 --- Logical Sectors Written
|
---|
131 | 0x01 0x028 6 23634 --- Logical Sectors Read
|
---|
132 | 0x01 0x038 6 3 --- Date and Time TimeStamp
|
---|
133 | 0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
---|
134 | 0x05 0x008 1 43 --- Current Temperature
|
---|
135 | 0x05 0x010 1 - --- Average Short Term Temperature
|
---|
136 | 0x05 0x018 1 - --- Average Long Term Temperature
|
---|
137 | 0x05 0x020 1 47 --- Highest Temperature
|
---|
138 | 0x05 0x028 1 31 --- Lowest Temperature
|
---|
139 | 0x05 0x030 1 - --- Highest Average Short Term Temperature
|
---|
140 | 0x05 0x038 1 - --- Lowest Average Short Term Temperature
|
---|
141 | 0x05 0x040 1 - --- Highest Average Long Term Temperature
|
---|
142 | 0x05 0x048 1 - --- Lowest Average Long Term Temperature
|
---|
143 | 0x05 0x050 4 0 --- Time in Over-Temperature
|
---|
144 | 0x05 0x058 1 95 --- Specified Maximum Operating Temperature
|
---|
145 | 0x05 0x060 4 0 --- Time in Under-Temperature
|
---|
146 | 0x05 0x068 1 0 --- Specified Minimum Operating Temperature
|
---|
147 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
---|
148 | 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|
---|
149 | |||_ C monitored condition met
|
---|
150 | ||__ D supports DSN
|
---|
151 | |___ N normalized value
|
---|
152 |
|
---|
153 | Pending Defects log (GP Log 0x0c) not supported
|
---|
154 |
|
---|
155 | SATA Phy Event Counters (GP Log 0x11)
|
---|
156 | ID Size Value Description
|
---|
157 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
---|
158 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
---|
159 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
---|
160 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
---|
161 | 0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy
|
---|
162 | 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
|
---|
163 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
---|
164 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
---|
165 | 0x0001 2 0 Command failed due to ICRC error
|
---|
166 |
|
---|