Ticket #1743: hdparm-I.log

File hdparm-I.log, 3.2 KB (added by sw2000, 10 months ago)

hdparm -I

Line 
1
2/dev/sdc:
3
4ATA device, with non-removable media
5 Model Number: SanDisk Portable SSD
6 Serial Number: 23191M441707
7 Firmware Revision: UM5004RL
8 Media Serial Num:
9 Media Manufacturer:
10 Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
11Standards:
12 Used: unknown (minor revision code 0x0110)
13 Supported: 10 9 8 7 6 5
14 Likely used: 10
15Configuration:
16 Logical max current
17 cylinders 16383 0
18 heads 16 0
19 sectors/track 63 0
20 --
21 LBA user addressable sectors: 268435455
22 LBA48 user addressable sectors: 3907029168
23 Logical Sector size: 512 bytes
24 Physical Sector size: 512 bytes
25 Logical Sector-0 offset: 0 bytes
26 device size with M = 1024*1024: 1907729 MBytes
27 device size with M = 1000*1000: 2000398 MBytes (2000 GB)
28 cache/buffer size = unknown
29 Form Factor: unknown (0x0007]
30 Nominal Media Rotation Rate: Solid State Device
31Capabilities:
32 LBA, IORDY(can be disabled)
33 Queue depth: 32
34 Standby timer values: spec'd by Standard, no device specific minimum
35 R/W multiple sector transfer: Max = 1 Current = 1
36 Advanced power management level: disabled
37 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 udma6 (?)
38 Cycle time: min=120ns recommended=120ns
39 PIO: pio0 pio1 pio2 pio3 pio4
40 Cycle time: no flow control=120ns IORDY flow control=120ns
41Commands/features:
42 Enabled Supported:
43 * SMART feature set
44 Security Mode feature set
45 * Power Management feature set
46 * Write cache
47 * Look-ahead
48 * Host Protected Area feature set
49 * WRITE_BUFFER command
50 * READ_BUFFER command
51 * DOWNLOAD_MICROCODE
52 Advanced Power Management feature set
53 SET_MAX security extension
54 * 48-bit Address feature set
55 * Device Configuration Overlay feature set
56 * Mandatory FLUSH_CACHE
57 * FLUSH_CACHE_EXT
58 * SMART error logging
59 * SMART self-test
60 * General Purpose Logging feature set
61 * 64-bit World wide name
62 * WRITE_UNCORRECTABLE_EXT command
63 * {READ,WRITE}_DMA_EXT_GPL commands
64 * Segmented DOWNLOAD_MICROCODE
65 unknown 119[8]
66 * Gen1 signaling speed (1.5Gb/s)
67 * Gen2 signaling speed (3.0Gb/s)
68 * Gen3 signaling speed (6.0Gb/s)
69 * Native Command Queueing (NCQ)
70 * Phy event counters
71 * READ_LOG_DMA_EXT equivalent to READ_LOG_EXT
72 Device-initiated interface power management
73 * Software settings preservation
74 Device Sleep (DEVSLP)
75 * SANITIZE feature set
76 * BLOCK_ERASE_EXT command
77 * SET MAX SETPASSWORD/UNLOCK DMA commands
78 * WRITE BUFFER DMA command
79 * READ BUFFER DMA command
80 * DEVICE CONFIGURATION SET/IDENTIFY DMA commands
81 * Data Set Management TRIM supported (limit 8 blocks)
82 * Deterministic read data after TRIM
83Security:
84 Master password revision code = 65534
85 supported
86 not enabled
87 not locked
88 not frozen
89 not expired: security count
90 not supported: enhanced erase
91 2min for SECURITY ERASE UNIT.
92Logical Unit WWN Device Identifier: 5001b444a583546a
93 NAA : 5
94 IEEE OUI : 001b44
95 Unique ID : 4a583546a
96Device Sleep:
97 DEVSLP Exit Timeout (DETO): 50 ms (drive)
98 Minimum DEVSLP Assertion Time (MDAT): 31 ms (drive)
99Checksum: correct