Ticket #1724: beolink-minis-satassd.txt.no_serial

File beolink-minis-satassd.txt.no_serial, 9.0 KB (added by Simon Mudd, 12 months ago)

output from sudo smartctl -q noserial -x /dev/sda > beolink-minis-satassd.txt.no_serial

Line 
1smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.19.0-41-generic] (local build)
2Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
3
4=== START OF INFORMATION SECTION ===
5Device Model: 128GB SSD
6Firmware Version: SN12521
7User Capacity: 128.035.676.160 bytes [128 GB]
8Sector Size: 512 bytes logical/physical
9Rotation Rate: Solid State Device
10Form Factor: M.2
11TRIM Command: Available, deterministic, zeroed
12Device is: Not in smartctl database [for details use: -P showall]
13ATA Version is: ACS-4 (minor revision not indicated)
14SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
15Local Time is: Thu May 11 09:00:31 2023 CEST
16SMART support is: Available - device has SMART capability.
17SMART support is: Enabled
18AAM feature is: Unavailable
19APM feature is: Unavailable
20Rd look-ahead is: Enabled
21Write cache is: Enabled
22DSN feature is: Unavailable
23ATA Security is: Disabled, frozen [SEC2]
24Wt Cache Reorder: Enabled
25
26=== START OF READ SMART DATA SECTION ===
27SMART overall-health self-assessment test result: PASSED
28
29General SMART Values:
30Offline data collection status: (0x02) Offline data collection activity
31 was completed without error.
32 Auto Offline Data Collection: Disabled.
33Self-test execution status: ( 0) The previous self-test routine completed
34 without error or no self-test has ever
35 been run.
36Total time to complete Offline
37data collection: ( 33) seconds.
38Offline data collection
39capabilities: (0x7b) SMART execute Offline immediate.
40 Auto Offline data collection on/off support.
41 Suspend Offline collection upon new
42 command.
43 Offline surface scan supported.
44 Self-test supported.
45 Conveyance Self-test supported.
46 Selective Self-test supported.
47SMART capabilities: (0x0003) Saves SMART data before entering
48 power-saving mode.
49 Supports SMART auto save timer.
50Error logging capability: (0x01) Error logging supported.
51 General Purpose Logging supported.
52Short self-test routine
53recommended polling time: ( 2) minutes.
54Extended self-test routine
55recommended polling time: ( 85) minutes.
56Conveyance self-test routine
57recommended polling time: ( 2) minutes.
58SCT capabilities: (0x0031) SCT Status supported.
59 SCT Feature Control supported.
60 SCT Data Table supported.
61
62SMART Attributes Data Structure revision number: 20
63Vendor Specific SMART Attributes with Thresholds:
64ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
65 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0
66 9 Power_On_Hours -O--C- 100 100 000 - 50
67 12 Power_Cycle_Count -O--C- 100 100 000 - 15
68164 Unknown_Attribute ------ 100 100 000 - 17180393479
69165 Unknown_Attribute ------ 100 100 000 - 8
70166 Unknown_Attribute ------ 100 100 000 - 4
71167 Unknown_Attribute -O---K 100 100 000 - 7
72194 Temperature_Celsius -O---K 031 031 000 - 31 (Min/Max 25/36)
73199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0
74241 Total_LBAs_Written -O--CK 100 100 000 - 229
75242 Total_LBAs_Read -O--CK 100 100 000 - 160
76 ||||||_ K auto-keep
77 |||||__ C event count
78 ||||___ R error rate
79 |||____ S speed/performance
80 ||_____ O updated online
81 |______ P prefailure warning
82
83General Purpose Log Directory Version 1
84SMART Log Directory Version 1 [multi-sector log support]
85Address Access R/W Size Description
860x00 GPL,SL R/O 1 Log Directory
870x01 SL R/O 1 Summary SMART error log
880x02 SL R/O 51 Comprehensive SMART error log
890x03 GPL R/O 64 Ext. Comprehensive SMART error log
900x04 GPL,SL R/O 8 Device Statistics log
910x06 SL R/O 1 SMART self-test log
920x07 GPL R/O 1 Extended self-test log
930x09 SL R/W 1 Selective self-test log
940x10 GPL R/O 1 NCQ Command Error log
950x11 GPL R/O 1 SATA Phy Event Counters log
960x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
970x80-0x9f GPL,SL R/W 16 Host vendor specific log
980xe0 GPL,SL R/W 1 SCT Command/Status
990xe1 GPL,SL R/W 1 SCT Data Transfer
100
101SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
102No Errors Logged
103
104SMART Extended Self-test Log Version: 1 (1 sectors)
105Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
106# 1 Short offline Completed without error 00% 50 -
107
108SMART Selective self-test log data structure revision number 1
109 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
110 1 0 0 Not_testing
111 2 0 0 Not_testing
112 3 0 0 Not_testing
113 4 0 0 Not_testing
114 5 0 0 Not_testing
115Selective self-test flags (0x0):
116 After scanning selected spans, do NOT read-scan remainder of disk.
117If Selective self-test is pending on power-up, resume after 0 minute delay.
118
119SCT Status Version: 3
120SCT Version (vendor specific): 1 (0x0001)
121Device State: Active (0)
122Current Temperature: 33 Celsius
123Power Cycle Min/Max Temperature: ?/34 Celsius
124Lifetime Min/Max Temperature: ?/ ? Celsius
125Under/Over Temperature Limit Count: 0/0
126
127SCT Temperature History Version: 2
128Temperature Sampling Period: 1 minute
129Temperature Logging Interval: 1 minute
130Min/Max recommended Temperature: -127/127 Celsius
131Min/Max Temperature Limit: -127/127 Celsius
132Temperature History Size (Index): 478 (85)
133
134Index Estimated Time Temperature Celsius
135 86 2023-05-11 01:03 32 *************
136 ... ..( 83 skipped). .. *************
137 170 2023-05-11 02:27 32 *************
138 171 2023-05-11 02:28 33 **************
139 172 2023-05-11 02:29 32 *************
140 173 2023-05-11 02:30 32 *************
141 174 2023-05-11 02:31 33 **************
142 ... ..( 28 skipped). .. **************
143 203 2023-05-11 03:00 33 **************
144 204 2023-05-11 03:01 32 *************
145 205 2023-05-11 03:02 33 **************
146 206 2023-05-11 03:03 32 *************
147 207 2023-05-11 03:04 33 **************
148 208 2023-05-11 03:05 32 *************
149 ... ..(127 skipped). .. *************
150 336 2023-05-11 05:13 32 *************
151 337 2023-05-11 05:14 33 **************
152 338 2023-05-11 05:15 32 *************
153 ... ..(210 skipped). .. *************
154 71 2023-05-11 08:46 32 *************
155 72 2023-05-11 08:47 33 **************
156 ... ..( 3 skipped). .. **************
157 76 2023-05-11 08:51 33 **************
158 77 2023-05-11 08:52 34 ***************
159 78 2023-05-11 08:53 33 **************
160 79 2023-05-11 08:54 34 ***************
161 ... ..( 3 skipped). .. ***************
162 83 2023-05-11 08:58 34 ***************
163 84 2023-05-11 08:59 33 **************
164 85 2023-05-11 09:00 33 **************
165
166SCT Error Recovery Control command not supported
167
168Device Statistics (GP Log 0x04)
169Page Offset Size Value Flags Description
1700x01 ===== = = === == General Statistics (rev 1) ==
1710x01 0x008 4 15 --- Lifetime Power-On Resets
1720x01 0x010 4 50 --- Power-on Hours
1730x01 0x018 6 481947399 --- Logical Sectors Written
1740x01 0x020 6 5158230 --- Number of Write Commands
1750x01 0x028 6 336492134 --- Logical Sectors Read
1760x01 0x030 6 1991390 --- Number of Read Commands
1770x01 0x038 6 30186175772 --- Date and Time TimeStamp
1780x07 ===== = = === == Solid State Device Statistics (rev 1) ==
1790x07 0x008 1 0 N-- Percentage Used Endurance Indicator
180 |||_ C monitored condition met
181 ||__ D supports DSN
182 |___ N normalized value
183
184Pending Defects log (GP Log 0x0c) not supported
185
186SATA Phy Event Counters (GP Log 0x11)
187ID Size Value Description
1880x0001 2 0 Command failed due to ICRC error
1890x0003 2 0 R_ERR response for device-to-host data FIS
1900x0004 2 0 R_ERR response for host-to-device data FIS
1910x0006 2 0 R_ERR response for device-to-host non-data FIS
1920x0007 2 0 R_ERR response for host-to-device non-data FIS
1930x0008 2 0 Device-to-host non-data FIS retries
1940x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
1950x000a 4 3 Device-to-host register FISes sent due to a COMRESET
1960x000f 2 0 R_ERR response for host-to-device data FIS, CRC
1970x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
1980x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
1990x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
200