| 1 | # smartctl -a /dev/nvme0n1
|
|---|
| 2 | smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.3.0-v6.3] (local build)
|
|---|
| 3 | Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 4 |
|
|---|
| 5 | === START OF INFORMATION SECTION ===
|
|---|
| 6 | Model Number: Seagate FireCuda 510 SSD ZP2000GM30001
|
|---|
| 7 | Serial Number: XXXXXXXX
|
|---|
| 8 | Firmware Version: STES1024
|
|---|
| 9 | PCI Vendor/Subsystem ID: 0x1bb1
|
|---|
| 10 | IEEE OUI Identifier: 0x0024cf
|
|---|
| 11 | Total NVM Capacity: 2.000.398.934.016 [2,00 TB]
|
|---|
| 12 | Unallocated NVM Capacity: 0
|
|---|
| 13 | Controller ID: 1
|
|---|
| 14 | NVMe Version: 1.3
|
|---|
| 15 | Number of Namespaces: 1
|
|---|
| 16 | Namespace 1 Size/Capacity: 2.000.398.934.016 [2,00 TB]
|
|---|
| 17 | Namespace 1 Formatted LBA Size: 512
|
|---|
| 18 | Namespace 1 IEEE EUI-64: 0024cf 00f400432d
|
|---|
| 19 | Local Time is: Tue May 2 22:55:52 2023 CEST
|
|---|
| 20 | Firmware Updates (0x1e): 7 Slots, no Reset required
|
|---|
| 21 | Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test
|
|---|
| 22 | Optional NVM Commands (0x005d): Comp DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp
|
|---|
| 23 | Log Page Attributes (0x0c): Ext_Get_Lg Telmtry_Lg
|
|---|
| 24 | Maximum Data Transfer Size: 512 Pages
|
|---|
| 25 | Warning Comp. Temp. Threshold: 70 Celsius
|
|---|
| 26 | Critical Comp. Temp. Threshold: 90 Celsius
|
|---|
| 27 |
|
|---|
| 28 | Supported Power States
|
|---|
| 29 | St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
|
|---|
| 30 | 0 + 10.73W - - 0 0 0 0 0 0
|
|---|
| 31 | 1 + 7.69W - - 1 1 1 1 0 0
|
|---|
| 32 | 2 + 6.18W - - 2 2 2 2 0 0
|
|---|
| 33 | 3 - 0.0490W - - 3 3 3 3 2000 2000
|
|---|
| 34 | 4 - 0.0018W - - 4 4 4 4 25000 25000
|
|---|
| 35 |
|
|---|
| 36 | Supported LBA Sizes (NSID 0x1)
|
|---|
| 37 | Id Fmt Data Metadt Rel_Perf
|
|---|
| 38 | 0 + 512 0 2
|
|---|
| 39 | 1 - 4096 0 1
|
|---|
| 40 |
|
|---|
| 41 | === START OF SMART DATA SECTION ===
|
|---|
| 42 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 43 |
|
|---|
| 44 | SMART/Health Information (NVMe Log 0x02)
|
|---|
| 45 | Critical Warning: 0x00
|
|---|
| 46 | Temperature: 36 Celsius
|
|---|
| 47 | Available Spare: 100%
|
|---|
| 48 | Available Spare Threshold: 5%
|
|---|
| 49 | Percentage Used: 0%
|
|---|
| 50 | Data Units Read: 10.889.990 [5,57 TB]
|
|---|
| 51 | Data Units Written: 17.671.505 [9,04 TB]
|
|---|
| 52 | Host Read Commands: 92.659.185
|
|---|
| 53 | Host Write Commands: 156.906.321
|
|---|
| 54 | Controller Busy Time: 640
|
|---|
| 55 | Power Cycles: 4.809
|
|---|
| 56 | Power On Hours: 3.257
|
|---|
| 57 | Unsafe Shutdowns: 51
|
|---|
| 58 | Media and Data Integrity Errors: 0
|
|---|
| 59 | Error Information Log Entries: 345
|
|---|
| 60 | Warning Comp. Temperature Time: 0
|
|---|
| 61 | Critical Comp. Temperature Time: 0
|
|---|
| 62 |
|
|---|
| 63 | Error Information (NVMe Log 0x01, 16 of 63 entries)
|
|---|
| 64 | Num ErrCount SQId CmdId Status PELoc LBA NSID VS
|
|---|
| 65 | 0 345 0 0x1000 0x4004 0x028 0 0 -
|
|---|
| 66 | 1 344 0 0xe010 0x4004 0x028 0 0 -
|
|---|
| 67 | 2 343 0 0x4012 0x4004 0x028 0 0 -
|
|---|
| 68 | 3 342 0 0x8019 0x4004 0x028 0 0 -
|
|---|
| 69 | 4 341 0 0x0016 0x4004 0x028 0 0 -
|
|---|
| 70 | 5 340 0 0xa014 0x4004 0x028 0 0 -
|
|---|
| 71 | 6 339 0 0x6012 0x4004 0x028 0 0 -
|
|---|
| 72 | 7 338 0 0x5016 0x4004 0x028 0 0 -
|
|---|
| 73 | 8 337 0 0x8008 0x4004 0x028 0 0 -
|
|---|
| 74 | 9 336 0 0xc00c 0x4004 0x028 0 0 -
|
|---|
| 75 | 10 335 0 0xa008 0x4004 0x028 0 0 -
|
|---|
| 76 | 11 334 0 0xa010 0x4004 0x028 0 0 -
|
|---|
| 77 | 12 333 0 0x7010 0x4004 0x028 0 0 -
|
|---|
| 78 | 13 332 0 0x0010 0x4004 0x028 0 0 -
|
|---|
| 79 | 14 331 0 0x000e 0x4004 - 0 0 -
|
|---|
| 80 | 15 330 0 0x3013 0x4004 0x028 0 0 -
|
|---|
| 81 | ... (47 entries not read)
|
|---|
| 82 |
|
|---|
| 83 |
|
|---|
| 84 |
|
|---|
| 85 |
|
|---|
| 86 | # zgrep --color -Hn smartd /var/log/syslog*
|
|---|
| 87 | /var/log/syslog:1559:2023-05-01T16:45:52.427529+02:00 myhost smartd[680]: Device: /dev/nvme0, number of Error Log entries increased from 338 to 340
|
|---|
| 88 | /var/log/syslog:2171:2023-05-01T22:39:44.768926+02:00 myhost smartd[680]: Device: /dev/nvme0, number of Error Log entries increased from 340 to 341
|
|---|
| 89 | /var/log/syslog:2172:2023-05-01T22:39:44.769220+02:00 myhost smartd[680]: Sending warning via /usr/share/smartmontools/smartd-runner to root ...
|
|---|
| 90 | /var/log/syslog:2173:2023-05-01T22:39:44.900889+02:00 myhost smartd[680]: Warning via /usr/share/smartmontools/smartd-runner to root: successful
|
|---|
| 91 | /var/log/syslog:2776:2023-05-01T23:41:17.677737+02:00 myhost smartd[680]: Device: /dev/nvme0, number of Error Log entries increased from 341 to 342
|
|---|
| 92 | /var/log/syslog:3665:2023-05-02T09:28:17.684784+02:00 myhost smartd[680]: Device: /dev/nvme0, number of Error Log entries increased from 342 to 343
|
|---|
| 93 | /var/log/syslog:4883:2023-05-02T22:49:46.146278+02:00 myhost smartd[680]: Device: /dev/nvme0, number of Error Log entries increased from 343 to 345
|
|---|
| 94 | /var/log/syslog:4884:2023-05-02T22:49:46.146589+02:00 myhost smartd[680]: Sending warning via /usr/share/smartmontools/smartd-runner to root ...
|
|---|
| 95 | /var/log/syslog:4885:2023-05-02T22:49:46.267066+02:00 myhost smartd[680]: Warning via /usr/share/smartmontools/smartd-runner to root: successful
|
|---|
| 96 | /var/log/syslog.1:8365:Apr 25 14:04:57 myhost smartd[752]: smartd 7.2 2020-12-30 r5155 [x86_64-linux-6.1.23-v6.1.23-4-g9fa16ea135631-00004-g9fa16ea13563] (local build)
|
|---|
| 97 | /var/log/syslog.1:8366:Apr 25 14:04:57 myhost smartd[752]: Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 98 | /var/log/syslog.1:8370:Apr 25 14:04:57 myhost smartd[752]: Opened configuration file /etc/smartd.conf
|
|---|
| 99 | /var/log/syslog.1:8425:Apr 25 14:04:57 myhost smartd[752]: Drive: DEVICESCAN, implied '-a' Directive on line 21 of file /etc/smartd.conf
|
|---|
| 100 | /var/log/syslog.1:8426:Apr 25 14:04:57 myhost smartd[752]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
|
|---|
| 101 | /var/log/syslog.1:8429:Apr 25 14:04:57 myhost smartd[752]: Device: /dev/nvme0, opened
|
|---|
| 102 | /var/log/syslog.1:8430:Apr 25 14:04:57 myhost smartd[752]: Device: /dev/nvme0, Seagate FireCuda 510 SSD ZP2000GM30001, S/N:XXXXXXXX, FW:STES1024, 2.00 TB
|
|---|
| 103 | /var/log/syslog.1:8431:Apr 25 14:04:57 myhost smartd[752]: Device: /dev/nvme0, is SMART capable. Adding to "monitor" list.
|
|---|
| 104 | /var/log/syslog.1:8432:Apr 25 14:04:57 myhost smartd[752]: Device: /dev/nvme0, state read from /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 105 | /var/log/syslog.1:8433:Apr 25 14:04:57 myhost smartd[752]: Monitoring 0 ATA/SATA, 0 SCSI/SAS and 1 NVMe devices
|
|---|
| 106 | /var/log/syslog.1:8434:Apr 25 14:04:57 myhost smartd[752]: Device: /dev/nvme0, number of Error Log entries increased from 321 to 322
|
|---|
| 107 | /var/log/syslog.1:8435:Apr 25 14:04:57 myhost smartd[752]: Sending warning via /usr/share/smartmontools/smartd-runner to root ...
|
|---|
| 108 | /var/log/syslog.1:8555:Apr 25 14:04:58 myhost smartd[752]: Warning via /usr/share/smartmontools/smartd-runner to root: successful
|
|---|
| 109 | /var/log/syslog.1:8556:Apr 25 14:04:58 myhost smartd[752]: Device: /dev/nvme0, state written to /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 110 | /var/log/syslog.1:9532:Apr 25 14:10:39 myhost smartd[752]: smartd received signal 15: Terminated
|
|---|
| 111 | /var/log/syslog.1:9539:Apr 25 14:10:39 myhost smartd[752]: Device: /dev/nvme0, state written to /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 112 | /var/log/syslog.1:9541:Apr 25 14:10:39 myhost smartd[752]: smartd is exiting (exit status 0)
|
|---|
| 113 | /var/log/syslog.1:10994:Apr 25 14:11:47 myhost smartd[690]: smartd 7.2 2020-12-30 r5155 [x86_64-linux-6.3.0-v6.3] (local build)
|
|---|
| 114 | /var/log/syslog.1:10995:Apr 25 14:11:47 myhost smartd[690]: Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 115 | /var/log/syslog.1:10996:Apr 25 14:11:47 myhost smartd[690]: Opened configuration file /etc/smartd.conf
|
|---|
| 116 | /var/log/syslog.1:10997:Apr 25 14:11:47 myhost smartd[690]: Drive: DEVICESCAN, implied '-a' Directive on line 21 of file /etc/smartd.conf
|
|---|
| 117 | /var/log/syslog.1:10998:Apr 25 14:11:47 myhost smartd[690]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
|
|---|
| 118 | /var/log/syslog.1:11002:Apr 25 14:11:47 myhost smartd[690]: Device: /dev/nvme0, opened
|
|---|
| 119 | /var/log/syslog.1:11012:Apr 25 14:11:47 myhost smartd[690]: Device: /dev/nvme0, Seagate FireCuda 510 SSD ZP2000GM30001, S/N:XXXXXXXX, FW:STES1024, 2.00 TB
|
|---|
| 120 | /var/log/syslog.1:11013:Apr 25 14:11:47 myhost smartd[690]: Device: /dev/nvme0, is SMART capable. Adding to "monitor" list.
|
|---|
| 121 | /var/log/syslog.1:11017:Apr 25 14:11:47 myhost smartd[690]: Device: /dev/nvme0, state read from /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 122 | /var/log/syslog.1:11018:Apr 25 14:11:47 myhost smartd[690]: Monitoring 0 ATA/SATA, 0 SCSI/SAS and 1 NVMe devices
|
|---|
| 123 | /var/log/syslog.1:11019:Apr 25 14:11:47 myhost smartd[690]: Device: /dev/nvme0, number of Error Log entries increased from 322 to 324
|
|---|
| 124 | /var/log/syslog.1:11020:Apr 25 14:11:47 myhost smartd[690]: Device: /dev/nvme0, state written to /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 125 | /var/log/syslog.1:12091:Apr 25 14:14:29 myhost smartd[690]: smartd received signal 15: Terminated
|
|---|
| 126 | /var/log/syslog.1:12093:Apr 25 14:14:29 myhost smartd[690]: Device: /dev/nvme0, state written to /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 127 | /var/log/syslog.1:12095:Apr 25 14:14:29 myhost smartd[690]: smartd is exiting (exit status 0)
|
|---|
| 128 | /var/log/syslog.1:13537:Apr 25 14:15:14 myhost smartd[691]: smartd 7.2 2020-12-30 r5155 [x86_64-linux-6.1.26-rc1-v6.1.25-99-ge4ff6ff54dea6-00099-ge4ff6ff54dea] (local build)
|
|---|
| 129 | /var/log/syslog.1:13538:Apr 25 14:15:14 myhost smartd[691]: Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 130 | /var/log/syslog.1:13539:Apr 25 14:15:14 myhost smartd[691]: Opened configuration file /etc/smartd.conf
|
|---|
| 131 | /var/log/syslog.1:13540:Apr 25 14:15:14 myhost smartd[691]: Drive: DEVICESCAN, implied '-a' Directive on line 21 of file /etc/smartd.conf
|
|---|
| 132 | /var/log/syslog.1:13541:Apr 25 14:15:14 myhost smartd[691]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
|
|---|
| 133 | /var/log/syslog.1:13543:Apr 25 14:15:14 myhost smartd[691]: Device: /dev/nvme0, opened
|
|---|
| 134 | /var/log/syslog.1:13544:Apr 25 14:15:14 myhost smartd[691]: Device: /dev/nvme0, Seagate FireCuda 510 SSD ZP2000GM30001, S/N:XXXXXXXX, FW:STES1024, 2.00 TB
|
|---|
| 135 | /var/log/syslog.1:13547:Apr 25 14:15:14 myhost smartd[691]: Device: /dev/nvme0, is SMART capable. Adding to "monitor" list.
|
|---|
| 136 | /var/log/syslog.1:13548:Apr 25 14:15:14 myhost smartd[691]: Device: /dev/nvme0, state read from /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 137 | /var/log/syslog.1:13549:Apr 25 14:15:14 myhost smartd[691]: Monitoring 0 ATA/SATA, 0 SCSI/SAS and 1 NVMe devices
|
|---|
| 138 | /var/log/syslog.1:13550:Apr 25 14:15:14 myhost smartd[691]: Device: /dev/nvme0, number of Error Log entries increased from 324 to 326
|
|---|
| 139 | /var/log/syslog.1:13551:Apr 25 14:15:14 myhost smartd[691]: Device: /dev/nvme0, state written to /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 140 | /var/log/syslog.1:14625:Apr 25 14:17:20 myhost smartd[691]: smartd received signal 15: Terminated
|
|---|
| 141 | /var/log/syslog.1:14629:Apr 25 14:17:20 myhost smartd[691]: Device: /dev/nvme0, state written to /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 142 | /var/log/syslog.1:14631:Apr 25 14:17:20 myhost smartd[691]: smartd is exiting (exit status 0)
|
|---|
| 143 | /var/log/syslog.1:16188:Apr 25 14:17:56 myhost smartd[729]: smartd 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-21-amd64] (local build)
|
|---|
| 144 | /var/log/syslog.1:16189:Apr 25 14:17:56 myhost smartd[729]: Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 145 | /var/log/syslog.1:16190:Apr 25 14:17:56 myhost smartd[729]: Opened configuration file /etc/smartd.conf
|
|---|
| 146 | /var/log/syslog.1:16191:Apr 25 14:17:56 myhost smartd[729]: Drive: DEVICESCAN, implied '-a' Directive on line 21 of file /etc/smartd.conf
|
|---|
| 147 | /var/log/syslog.1:16192:Apr 25 14:17:56 myhost smartd[729]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
|
|---|
| 148 | /var/log/syslog.1:16193:Apr 25 14:17:56 myhost smartd[729]: Device: /dev/nvme0, opened
|
|---|
| 149 | /var/log/syslog.1:16194:Apr 25 14:17:56 myhost smartd[729]: Device: /dev/nvme0, Seagate FireCuda 510 SSD ZP2000GM30001, S/N:XXXXXXXX, FW:STES1024, 2.00 TB
|
|---|
| 150 | /var/log/syslog.1:16195:Apr 25 14:17:56 myhost smartd[729]: Device: /dev/nvme0, is SMART capable. Adding to "monitor" list.
|
|---|
| 151 | /var/log/syslog.1:16196:Apr 25 14:17:56 myhost smartd[729]: Device: /dev/nvme0, state read from /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 152 | /var/log/syslog.1:16197:Apr 25 14:17:56 myhost smartd[729]: Monitoring 0 ATA/SATA, 0 SCSI/SAS and 1 NVMe devices
|
|---|
| 153 | /var/log/syslog.1:16201:Apr 25 14:17:56 myhost smartd[729]: Device: /dev/nvme0, number of Error Log entries increased from 326 to 327
|
|---|
| 154 | /var/log/syslog.1:16203:Apr 25 14:17:56 myhost smartd[729]: Device: /dev/nvme0, state written to /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 155 | /var/log/syslog.1:26834:Apr 28 15:22:35 myhost smartd[729]: smartd received signal 15: Terminated
|
|---|
| 156 | /var/log/syslog.1:26835:Apr 28 15:22:35 myhost smartd[729]: Device: /dev/nvme0, state written to /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 157 | /var/log/syslog.1:26836:Apr 28 15:22:35 myhost smartd[729]: smartd is exiting (exit status 0)
|
|---|
| 158 | /var/log/syslog.1:26840:Apr 28 15:22:35 myhost smartd[179958]: smartd 7.3 2022-02-28 r5338 [x86_64-linux-5.10.0-21-amd64] (local build)
|
|---|
| 159 | /var/log/syslog.1:26841:Apr 28 15:22:35 myhost smartd[179958]: Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 160 | /var/log/syslog.1:26842:Apr 28 15:22:35 myhost smartd[179958]: Opened configuration file /etc/smartd.conf
|
|---|
| 161 | /var/log/syslog.1:26843:Apr 28 15:22:35 myhost smartd[179958]: Drive: DEVICESCAN, implied '-a' Directive on line 21 of file /etc/smartd.conf
|
|---|
| 162 | /var/log/syslog.1:26844:Apr 28 15:22:35 myhost smartd[179958]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
|
|---|
| 163 | /var/log/syslog.1:26845:Apr 28 15:22:35 myhost smartd[179958]: Device: /dev/nvme0, opened
|
|---|
| 164 | /var/log/syslog.1:26846:Apr 28 15:22:35 myhost smartd[179958]: Device: /dev/nvme0, Seagate FireCuda 510 SSD ZP2000GM30001, S/N:XXXXXXXX, FW:STES1024, 2.00 TB
|
|---|
| 165 | /var/log/syslog.1:26847:Apr 28 15:22:35 myhost smartd[179958]: Device: /dev/nvme0, is SMART capable. Adding to "monitor" list.
|
|---|
| 166 | /var/log/syslog.1:26848:Apr 28 15:22:35 myhost smartd[179958]: Device: /dev/nvme0, state read from /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 167 | /var/log/syslog.1:26849:Apr 28 15:22:35 myhost smartd[179958]: Monitoring 0 ATA/SATA, 0 SCSI/SAS and 1 NVMe devices
|
|---|
| 168 | /var/log/syslog.1:26850:Apr 28 15:22:35 myhost smartd[179958]: Device: /dev/nvme0, state written to /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 169 | /var/log/syslog.1:29298:2023-04-28T15:53:51.152543+02:00 myhost smartd[681]: smartd 7.3 2022-02-28 r5338 [x86_64-linux-6.3.0-v6.3] (local build)
|
|---|
| 170 | /var/log/syslog.1:29299:2023-04-28T15:53:51.152696+02:00 myhost smartd[681]: Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 171 | /var/log/syslog.1:29300:2023-04-28T15:53:51.152772+02:00 myhost smartd[681]: Opened configuration file /etc/smartd.conf
|
|---|
| 172 | /var/log/syslog.1:29301:2023-04-28T15:53:51.154071+02:00 myhost smartd[681]: Drive: DEVICESCAN, implied '-a' Directive on line 21 of file /etc/smartd.conf
|
|---|
| 173 | /var/log/syslog.1:29302:2023-04-28T15:53:51.154253+02:00 myhost smartd[681]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
|
|---|
| 174 | /var/log/syslog.1:29303:2023-04-28T15:53:51.154324+02:00 myhost smartd[681]: Device: /dev/nvme0, opened
|
|---|
| 175 | /var/log/syslog.1:29305:2023-04-28T15:53:51.155015+02:00 myhost smartd[681]: Device: /dev/nvme0, Seagate FireCuda 510 SSD ZP2000GM30001, S/N:XXXXXXXX, FW:STES1024, 2.00 TB
|
|---|
| 176 | /var/log/syslog.1:29331:2023-04-28T15:53:51.156718+02:00 myhost smartd[681]: Device: /dev/nvme0, is SMART capable. Adding to "monitor" list.
|
|---|
| 177 | /var/log/syslog.1:29332:2023-04-28T15:53:51.156791+02:00 myhost smartd[681]: Device: /dev/nvme0, state read from /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 178 | /var/log/syslog.1:29333:2023-04-28T15:53:51.156862+02:00 myhost smartd[681]: Monitoring 0 ATA/SATA, 0 SCSI/SAS and 1 NVMe devices
|
|---|
| 179 | /var/log/syslog.1:29335:2023-04-28T15:53:51.157523+02:00 myhost smartd[681]: Device: /dev/nvme0, number of Error Log entries increased from 327 to 328
|
|---|
| 180 | /var/log/syslog.1:29336:2023-04-28T15:53:51.157635+02:00 myhost smartd[681]: Sending warning via /usr/share/smartmontools/smartd-runner to root ...
|
|---|
| 181 | /var/log/syslog.1:29486:2023-04-28T15:53:51.484678+02:00 myhost smartd[681]: Warning via /usr/share/smartmontools/smartd-runner to root: successful
|
|---|
| 182 | /var/log/syslog.1:29487:2023-04-28T15:53:51.484987+02:00 myhost smartd[681]: Device: /dev/nvme0, state written to /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 183 | /var/log/syslog.1:32326:2023-04-28T16:03:16.559481+02:00 myhost smartd[680]: smartd 7.3 2022-02-28 r5338 [x86_64-linux-6.3.0-v6.3] (local build)
|
|---|
| 184 | /var/log/syslog.1:32327:2023-04-28T16:03:16.559763+02:00 myhost smartd[680]: Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 185 | /var/log/syslog.1:32329:2023-04-28T16:03:16.561273+02:00 myhost smartd[680]: Opened configuration file /etc/smartd.conf
|
|---|
| 186 | /var/log/syslog.1:32330:2023-04-28T16:03:16.562385+02:00 myhost smartd[680]: Drive: DEVICESCAN, implied '-a' Directive on line 21 of file /etc/smartd.conf
|
|---|
| 187 | /var/log/syslog.1:32331:2023-04-28T16:03:16.562647+02:00 myhost smartd[680]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
|
|---|
| 188 | /var/log/syslog.1:32334:2023-04-28T16:03:16.565049+02:00 myhost smartd[680]: Device: /dev/nvme0, opened
|
|---|
| 189 | /var/log/syslog.1:32338:2023-04-28T16:03:16.565355+02:00 myhost smartd[680]: Device: /dev/nvme0, Seagate FireCuda 510 SSD ZP2000GM30001, S/N:XXXXXXXX, FW:STES1024, 2.00 TB
|
|---|
| 190 | /var/log/syslog.1:32340:2023-04-28T16:03:16.566070+02:00 myhost smartd[680]: Device: /dev/nvme0, is SMART capable. Adding to "monitor" list.
|
|---|
| 191 | /var/log/syslog.1:32341:2023-04-28T16:03:16.566752+02:00 myhost smartd[680]: Device: /dev/nvme0, state read from /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 192 | /var/log/syslog.1:32342:2023-04-28T16:03:16.566910+02:00 myhost smartd[680]: Monitoring 0 ATA/SATA, 0 SCSI/SAS and 1 NVMe devices
|
|---|
| 193 | /var/log/syslog.1:32343:2023-04-28T16:03:16.567761+02:00 myhost smartd[680]: Device: /dev/nvme0, number of Error Log entries increased from 328 to 330
|
|---|
| 194 | /var/log/syslog.1:32344:2023-04-28T16:03:16.568678+02:00 myhost smartd[680]: Device: /dev/nvme0, state written to /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 195 | /var/log/syslog.1:35862:2023-04-28T17:34:35.531914+02:00 myhost smartd[680]: smartd 7.3 2022-02-28 r5338 [x86_64-linux-6.3.0-v6.3] (local build)
|
|---|
| 196 | /var/log/syslog.1:35863:2023-04-28T17:34:35.532057+02:00 myhost smartd[680]: Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 197 | /var/log/syslog.1:35864:2023-04-28T17:34:35.532176+02:00 myhost smartd[680]: Opened configuration file /etc/smartd.conf
|
|---|
| 198 | /var/log/syslog.1:35865:2023-04-28T17:34:35.532789+02:00 myhost smartd[680]: Drive: DEVICESCAN, implied '-a' Directive on line 21 of file /etc/smartd.conf
|
|---|
| 199 | /var/log/syslog.1:35866:2023-04-28T17:34:35.532958+02:00 myhost smartd[680]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
|
|---|
| 200 | /var/log/syslog.1:35867:2023-04-28T17:34:35.533891+02:00 myhost smartd[680]: Device: /dev/nvme0, opened
|
|---|
| 201 | /var/log/syslog.1:35869:2023-04-28T17:34:35.534581+02:00 myhost smartd[680]: Device: /dev/nvme0, Seagate FireCuda 510 SSD ZP2000GM30001, S/N:XXXXXXXX, FW:STES1024, 2.00 TB
|
|---|
| 202 | /var/log/syslog.1:35870:2023-04-28T17:34:35.535909+02:00 myhost smartd[680]: Device: /dev/nvme0, is SMART capable. Adding to "monitor" list.
|
|---|
| 203 | /var/log/syslog.1:35872:2023-04-28T17:34:35.537508+02:00 myhost smartd[680]: Device: /dev/nvme0, state read from /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 204 | /var/log/syslog.1:35873:2023-04-28T17:34:35.537913+02:00 myhost smartd[680]: Monitoring 0 ATA/SATA, 0 SCSI/SAS and 1 NVMe devices
|
|---|
| 205 | /var/log/syslog.1:35874:2023-04-28T17:34:35.538376+02:00 myhost smartd[680]: Device: /dev/nvme0, number of Error Log entries increased from 330 to 332
|
|---|
| 206 | /var/log/syslog.1:35875:2023-04-28T17:34:35.539099+02:00 myhost smartd[680]: Device: /dev/nvme0, state written to /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 207 | /var/log/syslog.1:39622:2023-04-28T19:04:35.791891+02:00 myhost smartd[680]: Device: /dev/nvme0, number of Error Log entries increased from 332 to 334
|
|---|
| 208 | /var/log/syslog.1:44601:2023-04-29T02:13:21.036267+02:00 myhost smartd[680]: Device: /dev/nvme0, number of Error Log entries increased from 334 to 335
|
|---|
| 209 | /var/log/syslog.1:47853:2023-04-29T14:21:47.551629+02:00 myhost smartd[680]: Device: /dev/nvme0, number of Error Log entries increased from 335 to 336
|
|---|
| 210 | /var/log/syslog.1:49495:2023-04-30T21:46:36.296726+02:00 myhost smartd[680]: Device: /dev/nvme0, number of Error Log entries increased from 336 to 338
|
|---|
| 211 | /var/log/syslog.1:49496:2023-04-30T21:46:36.297111+02:00 myhost smartd[680]: Sending warning via /usr/share/smartmontools/smartd-runner to root ...
|
|---|
| 212 | /var/log/syslog.1:49497:2023-04-30T21:46:36.515798+02:00 myhost smartd[680]: Warning via /usr/share/smartmontools/smartd-runner to root: successful
|
|---|
| 213 | /var/log/syslog.3.gz:7079:Apr 11 10:20:16 myhost smartd[686]: smartd 7.2 2020-12-30 r5155 [x86_64-linux-6.1.22-v6.1.22-3-g95f7af2065d9-00003-g95f7af2065d9] (local build)
|
|---|
| 214 | /var/log/syslog.3.gz:7080:Apr 11 10:20:16 myhost smartd[686]: Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 215 | /var/log/syslog.3.gz:7081:Apr 11 10:20:16 myhost smartd[686]: Opened configuration file /etc/smartd.conf
|
|---|
| 216 | /var/log/syslog.3.gz:7082:Apr 11 10:20:16 myhost smartd[686]: Drive: DEVICESCAN, implied '-a' Directive on line 21 of file /etc/smartd.conf
|
|---|
| 217 | /var/log/syslog.3.gz:7083:Apr 11 10:20:16 myhost smartd[686]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
|
|---|
| 218 | /var/log/syslog.3.gz:7084:Apr 11 10:20:16 myhost smartd[686]: Device: /dev/nvme0, opened
|
|---|
| 219 | /var/log/syslog.3.gz:7085:Apr 11 10:20:16 myhost smartd[686]: Device: /dev/nvme0, Seagate FireCuda 510 SSD ZP2000GM30001, S/N:XXXXXXXX, FW:STES1024, 2.00 TB
|
|---|
| 220 | /var/log/syslog.3.gz:7088:Apr 11 10:20:16 myhost smartd[686]: Device: /dev/nvme0, is SMART capable. Adding to "monitor" list.
|
|---|
| 221 | /var/log/syslog.3.gz:7089:Apr 11 10:20:16 myhost smartd[686]: Device: /dev/nvme0, state read from /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 222 | /var/log/syslog.3.gz:7090:Apr 11 10:20:16 myhost smartd[686]: Monitoring 0 ATA/SATA, 0 SCSI/SAS and 1 NVMe devices
|
|---|
| 223 | /var/log/syslog.3.gz:7091:Apr 11 10:20:16 myhost smartd[686]: Device: /dev/nvme0, number of Error Log entries increased from 301 to 302
|
|---|
| 224 | /var/log/syslog.3.gz:7092:Apr 11 10:20:16 myhost smartd[686]: Sending warning via /usr/share/smartmontools/smartd-runner to root ...
|
|---|
| 225 | /var/log/syslog.3.gz:7214:Apr 11 10:20:17 myhost smartd[686]: Warning via /usr/share/smartmontools/smartd-runner to root: successful
|
|---|
| 226 | /var/log/syslog.3.gz:7215:Apr 11 10:20:17 myhost smartd[686]: Device: /dev/nvme0, state written to /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 227 | /var/log/syslog.3.gz:9606:Apr 11 10:24:07 myhost smartd[686]: smartd 7.2 2020-12-30 r5155 [x86_64-linux-6.1.23-rc3-v6.1.22-178-gf8a7fa4a96bb-00178-gf8a7fa4a96bb] (local build)
|
|---|
| 228 | /var/log/syslog.3.gz:9608:Apr 11 10:24:07 myhost smartd[686]: Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 229 | /var/log/syslog.3.gz:9609:Apr 11 10:24:07 myhost smartd[686]: Opened configuration file /etc/smartd.conf
|
|---|
| 230 | /var/log/syslog.3.gz:9611:Apr 11 10:24:07 myhost smartd[686]: Drive: DEVICESCAN, implied '-a' Directive on line 21 of file /etc/smartd.conf
|
|---|
| 231 | /var/log/syslog.3.gz:9612:Apr 11 10:24:07 myhost smartd[686]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
|
|---|
| 232 | /var/log/syslog.3.gz:9613:Apr 11 10:24:07 myhost smartd[686]: Device: /dev/nvme0, opened
|
|---|
| 233 | /var/log/syslog.3.gz:9614:Apr 11 10:24:07 myhost smartd[686]: Device: /dev/nvme0, Seagate FireCuda 510 SSD ZP2000GM30001, S/N:XXXXXXXX, FW:STES1024, 2.00 TB
|
|---|
| 234 | /var/log/syslog.3.gz:9616:Apr 11 10:24:07 myhost smartd[686]: Device: /dev/nvme0, is SMART capable. Adding to "monitor" list.
|
|---|
| 235 | /var/log/syslog.3.gz:9617:Apr 11 10:24:07 myhost smartd[686]: Device: /dev/nvme0, state read from /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 236 | /var/log/syslog.3.gz:9618:Apr 11 10:24:07 myhost smartd[686]: Monitoring 0 ATA/SATA, 0 SCSI/SAS and 1 NVMe devices
|
|---|
| 237 | /var/log/syslog.3.gz:9620:Apr 11 10:24:07 myhost smartd[686]: Device: /dev/nvme0, number of Error Log entries increased from 302 to 304
|
|---|
| 238 | /var/log/syslog.3.gz:9621:Apr 11 10:24:07 myhost smartd[686]: Device: /dev/nvme0, state written to /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 239 | /var/log/syslog.3.gz:11882:Apr 11 10:54:54 myhost smartd[743]: smartd 7.2 2020-12-30 r5155 [x86_64-linux-6.1.23-rc3-v6.1.22-178-gf8a7fa4a96bb-00178-gf8a7fa4a96bb] (local build)
|
|---|
| 240 | /var/log/syslog.3.gz:11883:Apr 11 10:54:54 myhost smartd[743]: Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 241 | /var/log/syslog.3.gz:11885:Apr 11 10:54:54 myhost smartd[743]: Opened configuration file /etc/smartd.conf
|
|---|
| 242 | /var/log/syslog.3.gz:11886:Apr 11 10:54:54 myhost smartd[743]: Drive: DEVICESCAN, implied '-a' Directive on line 21 of file /etc/smartd.conf
|
|---|
| 243 | /var/log/syslog.3.gz:11887:Apr 11 10:54:54 myhost smartd[743]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
|
|---|
| 244 | /var/log/syslog.3.gz:11889:Apr 11 10:54:54 myhost smartd[743]: Device: /dev/nvme0, opened
|
|---|
| 245 | /var/log/syslog.3.gz:11890:Apr 11 10:54:54 myhost smartd[743]: Device: /dev/nvme0, Seagate FireCuda 510 SSD ZP2000GM30001, S/N:XXXXXXXX, FW:STES1024, 2.00 TB
|
|---|
| 246 | /var/log/syslog.3.gz:11891:Apr 11 10:54:54 myhost smartd[743]: Device: /dev/nvme0, is SMART capable. Adding to "monitor" list.
|
|---|
| 247 | /var/log/syslog.3.gz:11892:Apr 11 10:54:54 myhost smartd[743]: Device: /dev/nvme0, state read from /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 248 | /var/log/syslog.3.gz:11893:Apr 11 10:54:54 myhost smartd[743]: Monitoring 0 ATA/SATA, 0 SCSI/SAS and 1 NVMe devices
|
|---|
| 249 | /var/log/syslog.3.gz:11894:Apr 11 10:54:54 myhost smartd[743]: Device: /dev/nvme0, number of Error Log entries increased from 304 to 308
|
|---|
| 250 | /var/log/syslog.3.gz:11895:Apr 11 10:54:54 myhost smartd[743]: Device: /dev/nvme0, state written to /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 251 | /var/log/syslog.3.gz:13986:Apr 11 11:23:49 myhost smartd[753]: smartd 7.2 2020-12-30 r5155 [x86_64-linux-6.1.23-rc3-v6.1.22-178-gf8a7fa4a96bb-00178-gf8a7fa4a96bb] (local build)
|
|---|
| 252 | /var/log/syslog.3.gz:13987:Apr 11 11:23:49 myhost smartd[753]: Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 253 | /var/log/syslog.3.gz:13988:Apr 11 11:23:49 myhost smartd[753]: Opened configuration file /etc/smartd.conf
|
|---|
| 254 | /var/log/syslog.3.gz:13989:Apr 11 11:23:49 myhost smartd[753]: Drive: DEVICESCAN, implied '-a' Directive on line 21 of file /etc/smartd.conf
|
|---|
| 255 | /var/log/syslog.3.gz:13991:Apr 11 11:23:49 myhost smartd[753]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
|
|---|
| 256 | /var/log/syslog.3.gz:13992:Apr 11 11:23:49 myhost smartd[753]: Device: /dev/nvme0, opened
|
|---|
| 257 | /var/log/syslog.3.gz:13993:Apr 11 11:23:49 myhost smartd[753]: Device: /dev/nvme0, Seagate FireCuda 510 SSD ZP2000GM30001, S/N:XXXXXXXX, FW:STES1024, 2.00 TB
|
|---|
| 258 | /var/log/syslog.3.gz:13994:Apr 11 11:23:49 myhost smartd[753]: Device: /dev/nvme0, is SMART capable. Adding to "monitor" list.
|
|---|
| 259 | /var/log/syslog.3.gz:13995:Apr 11 11:23:49 myhost smartd[753]: Device: /dev/nvme0, state read from /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 260 | /var/log/syslog.3.gz:13996:Apr 11 11:23:49 myhost smartd[753]: Monitoring 0 ATA/SATA, 0 SCSI/SAS and 1 NVMe devices
|
|---|
| 261 | /var/log/syslog.3.gz:14023:Apr 11 11:23:49 myhost smartd[753]: Device: /dev/nvme0, number of Error Log entries increased from 308 to 320
|
|---|
| 262 | /var/log/syslog.3.gz:14024:Apr 11 11:23:49 myhost smartd[753]: Device: /dev/nvme0, state written to /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 263 | /var/log/syslog.3.gz:15712:Apr 11 11:32:27 myhost smartd[728]: smartd 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-21-amd64] (local build)
|
|---|
| 264 | /var/log/syslog.3.gz:15717:Apr 11 11:32:27 myhost smartd[728]: Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 265 | /var/log/syslog.3.gz:15718:Apr 11 11:32:27 myhost smartd[728]: Opened configuration file /etc/smartd.conf
|
|---|
| 266 | /var/log/syslog.3.gz:15720:Apr 11 11:32:27 myhost smartd[728]: Drive: DEVICESCAN, implied '-a' Directive on line 21 of file /etc/smartd.conf
|
|---|
| 267 | /var/log/syslog.3.gz:15721:Apr 11 11:32:27 myhost smartd[728]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
|
|---|
| 268 | /var/log/syslog.3.gz:15741:Apr 11 11:32:27 myhost smartd[728]: Device: /dev/nvme0, opened
|
|---|
| 269 | /var/log/syslog.3.gz:16284:Apr 11 11:32:27 myhost smartd[728]: Device: /dev/nvme0, Seagate FireCuda 510 SSD ZP2000GM30001, S/N:XXXXXXXX, FW:STES1024, 2.00 TB
|
|---|
| 270 | /var/log/syslog.3.gz:16536:Apr 11 11:32:27 myhost smartd[728]: Device: /dev/nvme0, is SMART capable. Adding to "monitor" list.
|
|---|
| 271 | /var/log/syslog.3.gz:16537:Apr 11 11:32:27 myhost smartd[728]: Device: /dev/nvme0, state read from /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 272 | /var/log/syslog.3.gz:16538:Apr 11 11:32:27 myhost smartd[728]: Monitoring 0 ATA/SATA, 0 SCSI/SAS and 1 NVMe devices
|
|---|
| 273 | /var/log/syslog.3.gz:16539:Apr 11 11:32:27 myhost smartd[728]: Device: /dev/nvme0, number of Error Log entries increased from 320 to 321
|
|---|
| 274 | /var/log/syslog.3.gz:16542:Apr 11 11:32:27 myhost smartd[728]: Device: /dev/nvme0, state written to /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 275 | /var/log/syslog.4.gz:6191:Apr 3 17:34:29 myhost smartd[796]: smartd 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-21-amd64] (local build)
|
|---|
| 276 | /var/log/syslog.4.gz:6192:Apr 3 17:34:29 myhost smartd[796]: Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 277 | /var/log/syslog.4.gz:6193:Apr 3 17:34:29 myhost smartd[796]: Opened configuration file /etc/smartd.conf
|
|---|
| 278 | /var/log/syslog.4.gz:6194:Apr 3 17:34:29 myhost smartd[796]: Drive: DEVICESCAN, implied '-a' Directive on line 21 of file /etc/smartd.conf
|
|---|
| 279 | /var/log/syslog.4.gz:6195:Apr 3 17:34:29 myhost smartd[796]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
|
|---|
| 280 | /var/log/syslog.4.gz:6196:Apr 3 17:34:29 myhost smartd[796]: Device: /dev/nvme0, opened
|
|---|
| 281 | /var/log/syslog.4.gz:6197:Apr 3 17:34:29 myhost smartd[796]: Device: /dev/nvme0, Seagate FireCuda 510 SSD ZP2000GM30001, S/N:XXXXXXXX, FW:STES1024, 2.00 TB
|
|---|
| 282 | /var/log/syslog.4.gz:6200:Apr 3 17:34:29 myhost smartd[796]: Device: /dev/nvme0, is SMART capable. Adding to "monitor" list.
|
|---|
| 283 | /var/log/syslog.4.gz:6202:Apr 3 17:34:29 myhost smartd[796]: Device: /dev/nvme0, state read from /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 284 | /var/log/syslog.4.gz:6204:Apr 3 17:34:29 myhost smartd[796]: Monitoring 0 ATA/SATA, 0 SCSI/SAS and 1 NVMe devices
|
|---|
| 285 | /var/log/syslog.4.gz:6205:Apr 3 17:34:29 myhost smartd[796]: Device: /dev/nvme0, number of Error Log entries increased from 272 to 287
|
|---|
| 286 | /var/log/syslog.4.gz:6206:Apr 3 17:34:29 myhost smartd[796]: Sending warning via /usr/share/smartmontools/smartd-runner to root ...
|
|---|
| 287 | /var/log/syslog.4.gz:6359:Apr 3 17:34:30 myhost smartd[796]: Warning via /usr/share/smartmontools/smartd-runner to root: successful
|
|---|
| 288 | /var/log/syslog.4.gz:6360:Apr 3 17:34:30 myhost smartd[796]: Device: /dev/nvme0, state written to /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 289 | /var/log/syslog.4.gz:19369:Apr 6 09:29:27 myhost smartd[746]: smartd 7.2 2020-12-30 r5155 [x86_64-linux-6.1.20-v6.1.20] (local build)
|
|---|
| 290 | /var/log/syslog.4.gz:19370:Apr 6 09:29:27 myhost smartd[746]: Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 291 | /var/log/syslog.4.gz:19371:Apr 6 09:29:27 myhost smartd[746]: Opened configuration file /etc/smartd.conf
|
|---|
| 292 | /var/log/syslog.4.gz:19372:Apr 6 09:29:27 myhost smartd[746]: Drive: DEVICESCAN, implied '-a' Directive on line 21 of file /etc/smartd.conf
|
|---|
| 293 | /var/log/syslog.4.gz:19374:Apr 6 09:29:27 myhost smartd[746]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
|
|---|
| 294 | /var/log/syslog.4.gz:19375:Apr 6 09:29:27 myhost smartd[746]: Device: /dev/nvme0, opened
|
|---|
| 295 | /var/log/syslog.4.gz:19376:Apr 6 09:29:27 myhost smartd[746]: Device: /dev/nvme0, Seagate FireCuda 510 SSD ZP2000GM30001, S/N:XXXXXXXX, FW:STES1024, 2.00 TB
|
|---|
| 296 | /var/log/syslog.4.gz:19377:Apr 6 09:29:27 myhost smartd[746]: Device: /dev/nvme0, is SMART capable. Adding to "monitor" list.
|
|---|
| 297 | /var/log/syslog.4.gz:19379:Apr 6 09:29:28 myhost smartd[746]: Device: /dev/nvme0, state read from /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 298 | /var/log/syslog.4.gz:19381:Apr 6 09:29:28 myhost smartd[746]: Monitoring 0 ATA/SATA, 0 SCSI/SAS and 1 NVMe devices
|
|---|
| 299 | /var/log/syslog.4.gz:19382:Apr 6 09:29:28 myhost smartd[746]: Device: /dev/nvme0, number of Error Log entries increased from 287 to 288
|
|---|
| 300 | /var/log/syslog.4.gz:19383:Apr 6 09:29:28 myhost smartd[746]: Sending warning via /usr/share/smartmontools/smartd-runner to root ...
|
|---|
| 301 | /var/log/syslog.4.gz:19528:Apr 6 09:29:28 myhost smartd[746]: Warning via /usr/share/smartmontools/smartd-runner to root: successful
|
|---|
| 302 | /var/log/syslog.4.gz:19529:Apr 6 09:29:28 myhost smartd[746]: Device: /dev/nvme0, state written to /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 303 | /var/log/syslog.4.gz:22631:Apr 6 09:41:50 myhost smartd[742]: smartd 7.2 2020-12-30 r5155 [x86_64-linux-6.1.22-v6.1.22-3-g95f7af2065d9-00003-g95f7af2065d9] (local build)
|
|---|
| 304 | /var/log/syslog.4.gz:22632:Apr 6 09:41:50 myhost smartd[742]: Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 305 | /var/log/syslog.4.gz:22634:Apr 6 09:41:50 myhost smartd[742]: Opened configuration file /etc/smartd.conf
|
|---|
| 306 | /var/log/syslog.4.gz:22636:Apr 6 09:41:50 myhost smartd[742]: Drive: DEVICESCAN, implied '-a' Directive on line 21 of file /etc/smartd.conf
|
|---|
| 307 | /var/log/syslog.4.gz:22637:Apr 6 09:41:50 myhost smartd[742]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
|
|---|
| 308 | /var/log/syslog.4.gz:22638:Apr 6 09:41:50 myhost smartd[742]: Device: /dev/nvme0, opened
|
|---|
| 309 | /var/log/syslog.4.gz:22639:Apr 6 09:41:50 myhost smartd[742]: Device: /dev/nvme0, Seagate FireCuda 510 SSD ZP2000GM30001, S/N:XXXXXXXX, FW:STES1024, 2.00 TB
|
|---|
| 310 | /var/log/syslog.4.gz:22640:Apr 6 09:41:50 myhost smartd[742]: Device: /dev/nvme0, is SMART capable. Adding to "monitor" list.
|
|---|
| 311 | /var/log/syslog.4.gz:22641:Apr 6 09:41:50 myhost smartd[742]: Device: /dev/nvme0, state read from /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 312 | /var/log/syslog.4.gz:22642:Apr 6 09:41:50 myhost smartd[742]: Monitoring 0 ATA/SATA, 0 SCSI/SAS and 1 NVMe devices
|
|---|
| 313 | /var/log/syslog.4.gz:22643:Apr 6 09:41:50 myhost smartd[742]: Device: /dev/nvme0, number of Error Log entries increased from 288 to 292
|
|---|
| 314 | /var/log/syslog.4.gz:22644:Apr 6 09:41:50 myhost smartd[742]: Device: /dev/nvme0, state written to /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 315 | /var/log/syslog.4.gz:24592:Apr 6 09:46:03 myhost smartd[742]: smartd received signal 15: Terminated
|
|---|
| 316 | /var/log/syslog.4.gz:24596:Apr 6 09:46:03 myhost smartd[742]: Device: /dev/nvme0, state written to /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 317 | /var/log/syslog.4.gz:24598:Apr 6 09:46:03 myhost smartd[742]: smartd is exiting (exit status 0)
|
|---|
| 318 | /var/log/syslog.4.gz:25168:Apr 6 09:47:00 myhost smartd[720]: smartd 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-21-amd64] (local build)
|
|---|
| 319 | /var/log/syslog.4.gz:25169:Apr 6 09:47:00 myhost smartd[720]: Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 320 | /var/log/syslog.4.gz:25170:Apr 6 09:47:00 myhost smartd[720]: Opened configuration file /etc/smartd.conf
|
|---|
| 321 | /var/log/syslog.4.gz:25171:Apr 6 09:47:00 myhost smartd[720]: Drive: DEVICESCAN, implied '-a' Directive on line 21 of file /etc/smartd.conf
|
|---|
| 322 | /var/log/syslog.4.gz:25172:Apr 6 09:47:00 myhost smartd[720]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
|
|---|
| 323 | /var/log/syslog.4.gz:25175:Apr 6 09:47:00 myhost smartd[720]: Device: /dev/nvme0, opened
|
|---|
| 324 | /var/log/syslog.4.gz:25177:Apr 6 09:47:00 myhost smartd[720]: Device: /dev/nvme0, Seagate FireCuda 510 SSD ZP2000GM30001, S/N:XXXXXXXX, FW:STES1024, 2.00 TB
|
|---|
| 325 | /var/log/syslog.4.gz:25178:Apr 6 09:47:00 myhost smartd[720]: Device: /dev/nvme0, is SMART capable. Adding to "monitor" list.
|
|---|
| 326 | /var/log/syslog.4.gz:25179:Apr 6 09:47:00 myhost smartd[720]: Device: /dev/nvme0, state read from /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 327 | /var/log/syslog.4.gz:25180:Apr 6 09:47:00 myhost smartd[720]: Monitoring 0 ATA/SATA, 0 SCSI/SAS and 1 NVMe devices
|
|---|
| 328 | /var/log/syslog.4.gz:25181:Apr 6 09:47:00 myhost smartd[720]: Device: /dev/nvme0, number of Error Log entries increased from 292 to 297
|
|---|
| 329 | /var/log/syslog.4.gz:25182:Apr 6 09:47:00 myhost smartd[720]: Device: /dev/nvme0, state written to /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 330 | /var/log/syslog.4.gz:34894:Apr 8 22:47:44 myhost smartd[845]: smartd 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-21-amd64] (local build)
|
|---|
| 331 | /var/log/syslog.4.gz:34895:Apr 8 22:47:44 myhost smartd[845]: Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 332 | /var/log/syslog.4.gz:34897:Apr 8 22:47:44 myhost smartd[845]: Opened configuration file /etc/smartd.conf
|
|---|
| 333 | /var/log/syslog.4.gz:34898:Apr 8 22:47:44 myhost smartd[845]: Drive: DEVICESCAN, implied '-a' Directive on line 21 of file /etc/smartd.conf
|
|---|
| 334 | /var/log/syslog.4.gz:34899:Apr 8 22:47:44 myhost smartd[845]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
|
|---|
| 335 | /var/log/syslog.4.gz:34900:Apr 8 22:47:44 myhost smartd[845]: Device: /dev/nvme0, opened
|
|---|
| 336 | /var/log/syslog.4.gz:34901:Apr 8 22:47:44 myhost smartd[845]: Device: /dev/nvme0, Seagate FireCuda 510 SSD ZP2000GM30001, S/N:XXXXXXXX, FW:STES1024, 2.00 TB
|
|---|
| 337 | /var/log/syslog.4.gz:34902:Apr 8 22:47:44 myhost smartd[845]: Device: /dev/nvme0, is SMART capable. Adding to "monitor" list.
|
|---|
| 338 | /var/log/syslog.4.gz:34903:Apr 8 22:47:44 myhost smartd[845]: Device: /dev/nvme0, state read from /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 339 | /var/log/syslog.4.gz:34904:Apr 8 22:47:44 myhost smartd[845]: Monitoring 0 ATA/SATA, 0 SCSI/SAS and 1 NVMe devices
|
|---|
| 340 | /var/log/syslog.4.gz:34906:Apr 8 22:47:44 myhost smartd[845]: Device: /dev/nvme0, number of Error Log entries increased from 297 to 301
|
|---|
| 341 | /var/log/syslog.4.gz:34907:Apr 8 22:47:44 myhost smartd[845]: Sending warning via /usr/share/smartmontools/smartd-runner to root ...
|
|---|
| 342 | /var/log/syslog.4.gz:35055:Apr 8 22:47:45 myhost smartd[845]: Warning via /usr/share/smartmontools/smartd-runner to root: successful
|
|---|
| 343 | /var/log/syslog.4.gz:35056:Apr 8 22:47:45 myhost smartd[845]: Device: /dev/nvme0, state written to /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 344 | /var/log/syslog.6.gz:2593:Feb 26 19:27:42 myhost smartd[698]: smartd 7.2 2020-12-30 r5155 [x86_64-linux-5.8.18-custom] (local build)
|
|---|
| 345 | /var/log/syslog.6.gz:2594:Feb 26 19:27:42 myhost smartd[698]: Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 346 | /var/log/syslog.6.gz:2595:Feb 26 19:27:42 myhost smartd[698]: Opened configuration file /etc/smartd.conf
|
|---|
| 347 | /var/log/syslog.6.gz:2596:Feb 26 19:27:42 myhost smartd[698]: Drive: DEVICESCAN, implied '-a' Directive on line 21 of file /etc/smartd.conf
|
|---|
| 348 | /var/log/syslog.6.gz:2597:Feb 26 19:27:42 myhost smartd[698]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
|
|---|
| 349 | /var/log/syslog.6.gz:2598:Feb 26 19:27:42 myhost smartd[698]: Device: /dev/nvme0, opened
|
|---|
| 350 | /var/log/syslog.6.gz:2599:Feb 26 19:27:42 myhost smartd[698]: Device: /dev/nvme0, Seagate FireCuda 510 SSD ZP2000GM30001, S/N:XXXXXXXX, FW:STES1024, 2.00 TB
|
|---|
| 351 | /var/log/syslog.6.gz:2600:Feb 26 19:27:42 myhost smartd[698]: Device: /dev/nvme0, is SMART capable. Adding to "monitor" list.
|
|---|
| 352 | /var/log/syslog.6.gz:2601:Feb 26 19:27:42 myhost smartd[698]: Device: /dev/nvme0, state read from /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 353 | /var/log/syslog.6.gz:2602:Feb 26 19:27:42 myhost smartd[698]: Monitoring 0 ATA/SATA, 0 SCSI/SAS and 1 NVMe devices
|
|---|
| 354 | /var/log/syslog.6.gz:2603:Feb 26 19:27:42 myhost smartd[698]: Device: /dev/nvme0, state written to /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 355 | /var/log/syslog.6.gz:7480:Feb 26 19:41:35 myhost smartd[719]: smartd 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-3-amd64] (local build)
|
|---|
| 356 | /var/log/syslog.6.gz:7481:Feb 26 19:41:35 myhost smartd[719]: Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 357 | /var/log/syslog.6.gz:7482:Feb 26 19:41:35 myhost smartd[719]: Opened configuration file /etc/smartd.conf
|
|---|
| 358 | /var/log/syslog.6.gz:7483:Feb 26 19:41:35 myhost smartd[719]: Drive: DEVICESCAN, implied '-a' Directive on line 21 of file /etc/smartd.conf
|
|---|
| 359 | /var/log/syslog.6.gz:7484:Feb 26 19:41:35 myhost smartd[719]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
|
|---|
| 360 | /var/log/syslog.6.gz:7487:Feb 26 19:41:35 myhost smartd[719]: Device: /dev/nvme0, opened
|
|---|
| 361 | /var/log/syslog.6.gz:7488:Feb 26 19:41:35 myhost smartd[719]: Device: /dev/nvme0, Seagate FireCuda 510 SSD ZP2000GM30001, S/N:XXXXXXXX, FW:STES1024, 2.00 TB
|
|---|
| 362 | /var/log/syslog.6.gz:7491:Feb 26 19:41:35 myhost smartd[719]: Device: /dev/nvme0, is SMART capable. Adding to "monitor" list.
|
|---|
| 363 | /var/log/syslog.6.gz:7503:Feb 26 19:41:35 myhost smartd[719]: Device: /dev/nvme0, state read from /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 364 | /var/log/syslog.6.gz:7504:Feb 26 19:41:35 myhost smartd[719]: Monitoring 0 ATA/SATA, 0 SCSI/SAS and 1 NVMe devices
|
|---|
| 365 | /var/log/syslog.6.gz:7506:Feb 26 19:41:35 myhost smartd[719]: Device: /dev/nvme0, state written to /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 366 | /var/log/syslog.6.gz:12629:Feb 26 20:05:18 myhost smartd[747]: smartd 7.2 2020-12-30 r5155 [x86_64-linux-5.8.18-custom] (local build)
|
|---|
| 367 | /var/log/syslog.6.gz:12630:Feb 26 20:05:18 myhost smartd[747]: Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 368 | /var/log/syslog.6.gz:12631:Feb 26 20:05:18 myhost smartd[747]: Opened configuration file /etc/smartd.conf
|
|---|
| 369 | /var/log/syslog.6.gz:12632:Feb 26 20:05:18 myhost smartd[747]: Drive: DEVICESCAN, implied '-a' Directive on line 21 of file /etc/smartd.conf
|
|---|
| 370 | /var/log/syslog.6.gz:12633:Feb 26 20:05:18 myhost smartd[747]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
|
|---|
| 371 | /var/log/syslog.6.gz:12634:Feb 26 20:05:18 myhost smartd[747]: Device: /dev/nvme0, opened
|
|---|
| 372 | /var/log/syslog.6.gz:12635:Feb 26 20:05:18 myhost smartd[747]: Device: /dev/nvme0, Seagate FireCuda 510 SSD ZP2000GM30001, S/N:XXXXXXXX, FW:STES1024, 2.00 TB
|
|---|
| 373 | /var/log/syslog.6.gz:12636:Feb 26 20:05:18 myhost smartd[747]: Device: /dev/nvme0, is SMART capable. Adding to "monitor" list.
|
|---|
| 374 | /var/log/syslog.6.gz:12637:Feb 26 20:05:18 myhost smartd[747]: Device: /dev/nvme0, state read from /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 375 | /var/log/syslog.6.gz:12638:Feb 26 20:05:18 myhost smartd[747]: Monitoring 0 ATA/SATA, 0 SCSI/SAS and 1 NVMe devices
|
|---|
| 376 | /var/log/syslog.6.gz:12639:Feb 26 20:05:18 myhost smartd[747]: Device: /dev/nvme0, state written to /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 377 | /var/log/syslog.6.gz:20968:Feb 26 20:19:11 myhost smartd[682]: smartd 7.2 2020-12-30 r5155 [x86_64-linux-5.9.0-4-amd64] (local build)
|
|---|
| 378 | /var/log/syslog.6.gz:20969:Feb 26 20:19:11 myhost smartd[682]: Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 379 | /var/log/syslog.6.gz:20970:Feb 26 20:19:11 myhost smartd[682]: Opened configuration file /etc/smartd.conf
|
|---|
| 380 | /var/log/syslog.6.gz:20971:Feb 26 20:19:11 myhost smartd[682]: Drive: DEVICESCAN, implied '-a' Directive on line 21 of file /etc/smartd.conf
|
|---|
| 381 | /var/log/syslog.6.gz:20972:Feb 26 20:19:11 myhost smartd[682]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
|
|---|
| 382 | /var/log/syslog.6.gz:20973:Feb 26 20:19:11 myhost smartd[682]: Device: /dev/nvme0, opened
|
|---|
| 383 | /var/log/syslog.6.gz:21003:Feb 26 20:19:11 myhost smartd[682]: Device: /dev/nvme0, Seagate FireCuda 510 SSD ZP2000GM30001, S/N:XXXXXXXX, FW:STES1024, 2.00 TB
|
|---|
| 384 | /var/log/syslog.6.gz:21004:Feb 26 20:19:11 myhost smartd[682]: Device: /dev/nvme0, is SMART capable. Adding to "monitor" list.
|
|---|
| 385 | /var/log/syslog.6.gz:21005:Feb 26 20:19:11 myhost smartd[682]: Device: /dev/nvme0, state read from /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 386 | /var/log/syslog.6.gz:21006:Feb 26 20:19:11 myhost smartd[682]: Monitoring 0 ATA/SATA, 0 SCSI/SAS and 1 NVMe devices
|
|---|
| 387 | /var/log/syslog.6.gz:21009:Feb 26 20:19:11 myhost smartd[682]: Device: /dev/nvme0, number of Error Log entries increased from 34 to 35
|
|---|
| 388 | /var/log/syslog.6.gz:21011:Feb 26 20:19:11 myhost smartd[682]: Sending warning via /usr/share/smartmontools/smartd-runner to root ...
|
|---|
| 389 | /var/log/syslog.6.gz:21133:Feb 26 20:19:11 myhost smartd[682]: Warning via /usr/share/smartmontools/smartd-runner to root: successful
|
|---|
| 390 | /var/log/syslog.6.gz:21134:Feb 26 20:19:11 myhost smartd[682]: Device: /dev/nvme0, state written to /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 391 | /var/log/syslog.6.gz:26234:Feb 26 20:27:04 myhost smartd[701]: smartd 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-3-amd64] (local build)
|
|---|
| 392 | /var/log/syslog.6.gz:26235:Feb 26 20:27:04 myhost smartd[701]: Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 393 | /var/log/syslog.6.gz:26236:Feb 26 20:27:04 myhost smartd[701]: Opened configuration file /etc/smartd.conf
|
|---|
| 394 | /var/log/syslog.6.gz:26237:Feb 26 20:27:04 myhost smartd[701]: Drive: DEVICESCAN, implied '-a' Directive on line 21 of file /etc/smartd.conf
|
|---|
| 395 | /var/log/syslog.6.gz:26238:Feb 26 20:27:04 myhost smartd[701]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
|
|---|
| 396 | /var/log/syslog.6.gz:26239:Feb 26 20:27:04 myhost smartd[701]: Device: /dev/nvme0, opened
|
|---|
| 397 | /var/log/syslog.6.gz:26240:Feb 26 20:27:04 myhost smartd[701]: Device: /dev/nvme0, Seagate FireCuda 510 SSD ZP2000GM30001, S/N:XXXXXXXX, FW:STES1024, 2.00 TB
|
|---|
| 398 | /var/log/syslog.6.gz:26241:Feb 26 20:27:04 myhost smartd[701]: Device: /dev/nvme0, is SMART capable. Adding to "monitor" list.
|
|---|
| 399 | /var/log/syslog.6.gz:26242:Feb 26 20:27:04 myhost smartd[701]: Device: /dev/nvme0, state read from /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 400 | /var/log/syslog.6.gz:26243:Feb 26 20:27:04 myhost smartd[701]: Monitoring 0 ATA/SATA, 0 SCSI/SAS and 1 NVMe devices
|
|---|
| 401 | /var/log/syslog.6.gz:26244:Feb 26 20:27:04 myhost smartd[701]: Device: /dev/nvme0, state written to /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 402 | /var/log/syslog.6.gz:33078:Feb 26 21:42:43 myhost smartd[699]: smartd 7.2 2020-12-30 r5155 [x86_64-linux-5.8.18-custom] (local build)
|
|---|
| 403 | /var/log/syslog.6.gz:33079:Feb 26 21:42:43 myhost smartd[699]: Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 404 | /var/log/syslog.6.gz:33080:Feb 26 21:42:43 myhost smartd[699]: Opened configuration file /etc/smartd.conf
|
|---|
| 405 | /var/log/syslog.6.gz:33081:Feb 26 21:42:43 myhost smartd[699]: Drive: DEVICESCAN, implied '-a' Directive on line 21 of file /etc/smartd.conf
|
|---|
| 406 | /var/log/syslog.6.gz:33082:Feb 26 21:42:43 myhost smartd[699]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
|
|---|
| 407 | /var/log/syslog.6.gz:33083:Feb 26 21:42:43 myhost smartd[699]: Device: /dev/nvme0, opened
|
|---|
| 408 | /var/log/syslog.6.gz:33084:Feb 26 21:42:43 myhost smartd[699]: Device: /dev/nvme0, Seagate FireCuda 510 SSD ZP2000GM30001, S/N:XXXXXXXX, FW:STES1024, 2.00 TB
|
|---|
| 409 | /var/log/syslog.6.gz:33085:Feb 26 21:42:43 myhost smartd[699]: Device: /dev/nvme0, is SMART capable. Adding to "monitor" list.
|
|---|
| 410 | /var/log/syslog.6.gz:33086:Feb 26 21:42:43 myhost smartd[699]: Device: /dev/nvme0, state read from /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
| 411 | /var/log/syslog.6.gz:33087:Feb 26 21:42:43 myhost smartd[699]: Monitoring 0 ATA/SATA, 0 SCSI/SAS and 1 NVMe devices
|
|---|
| 412 | /var/log/syslog.6.gz:33088:Feb 26 21:42:43 myhost smartd[699]: Device: /dev/nvme0, state written to /var/lib/smartmontools/smartd.Seagate_FireCuda_510_SSD_ZP2000GM30001-XXXXXXXX.nvme.state
|
|---|
