Ticket #1712: smartctl-SAMSUNG-HD082GJ.txt

File smartctl-SAMSUNG-HD082GJ.txt, 17.7 KB (added by Cmdr_Zod, 3 years ago)
Line 
1smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-21-amd64] (local build)
2Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
3
4=== START OF INFORMATION SECTION ===
5Device Model: SAMSUNG HD082GJ
6Serial Number: S0VPJ9AQ402566
7LU WWN Device Id: 5 0000f0 09b402566
8Firmware Version: GE100-07
9User Capacity: 80,026,361,856 bytes [80.0 GB]
10Sector Size: 512 bytes logical/physical
11Device is: Not in smartctl database [for details use: -P showall]
12ATA Version is: ATA8-ACS T13/1699-D revision 3b
13SATA Version is: SATA 2.5, 3.0 Gb/s
14Local Time is: Thu Apr 13 18:31:02 2023 CEST
15SMART support is: Available - device has SMART capability.
16SMART support is: Enabled
17AAM feature is: Disabled
18APM feature is: Disabled
19Rd look-ahead is: Enabled
20Write cache is: Enabled
21DSN feature is: Unavailable
22ATA Security is: Disabled, NOT FROZEN [SEC1]
23Wt Cache Reorder: Enabled
24
25=== START OF READ SMART DATA SECTION ===
26SMART overall-health self-assessment test result: PASSED
27
28General SMART Values:
29Offline data collection status: (0x00) Offline data collection activity
30 was never started.
31 Auto Offline Data Collection: Disabled.
32Self-test execution status: ( 0) The previous self-test routine completed
33 without error or no self-test has ever
34 been run.
35Total time to complete Offline
36data collection: ( 1320) seconds.
37Offline data collection
38capabilities: (0x5b) SMART execute Offline immediate.
39 Auto Offline data collection on/off support.
40 Suspend Offline collection upon new
41 command.
42 Offline surface scan supported.
43 Self-test supported.
44 No Conveyance Self-test supported.
45 Selective Self-test supported.
46SMART capabilities: (0x0003) Saves SMART data before entering
47 power-saving mode.
48 Supports SMART auto save timer.
49Error logging capability: (0x01) Error logging supported.
50 General Purpose Logging supported.
51Short self-test routine
52recommended polling time: ( 2) minutes.
53Extended self-test routine
54recommended polling time: ( 22) minutes.
55SCT capabilities: (0x003f) SCT Status supported.
56 SCT Error Recovery Control supported.
57 SCT Feature Control supported.
58 SCT Data Table supported.
59
60SMART Attributes Data Structure revision number: 18
61Vendor Specific SMART Attributes with Thresholds:
62ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
63 1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0
64 3 Spin_Up_Time POS--- 073 073 011 - 4000
65 4 Start_Stop_Count -O--CK 089 089 000 - 10249
66 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0
67 7 Seek_Error_Rate POSR-- 252 252 051 - 0
68 8 Seek_Time_Performance P-S--K 252 252 015 - 0
69 9 Power_On_Hours -O--CK 099 099 000 - 462713
70 10 Spin_Retry_Count PO--CK 252 252 051 - 0
71 11 Calibration_Retry_Count -O--C- 252 252 000 - 0
72 12 Power_Cycle_Count -O--CK 095 095 000 - 4795
73184 End-to-End_Error -O--CK 252 252 000 - 0
74187 Reported_Uncorrect -O--CK 252 252 000 - 0
75188 Command_Timeout -O--CK 252 252 000 - 0
76190 Airflow_Temperature_Cel -O---K 160 106 000 - 31
77194 Temperature_Celsius -O---K 160 106 000 - 31
78195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 0
79196 Reallocated_Event_Count -O--CK 252 252 000 - 0
80197 Current_Pending_Sector -O--C- 252 252 000 - 0
81198 Offline_Uncorrectable ----CK 252 252 000 - 0
82199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 1
83200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0
84201 Soft_Read_Error_Rate -O-R-- 252 252 000 - 0
85 ||||||_ K auto-keep
86 |||||__ C event count
87 ||||___ R error rate
88 |||____ S speed/performance
89 ||_____ O updated online
90 |______ P prefailure warning
91
92General Purpose Log Directory Version 1
93SMART Log Directory Version 1 [multi-sector log support]
94Address Access R/W Size Description
950x00 GPL,SL R/O 1 Log Directory
960x01 SL R/O 1 Summary SMART error log
970x02 SL R/O 2 Comprehensive SMART error log
980x03 GPL R/O 2 Ext. Comprehensive SMART error log
990x06 SL R/O 1 SMART self-test log
1000x07 GPL R/O 1 Extended self-test log
1010x09 SL R/W 1 Selective self-test log
1020x10 GPL R/O 1 NCQ Command Error log
1030x11 GPL R/O 1 SATA Phy Event Counters log
1040x80-0x9f GPL,SL R/W 16 Host vendor specific log
1050xe0 GPL,SL R/W 1 SCT Command/Status
1060xe1 GPL,SL R/W 1 SCT Data Transfer
107
108SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
109Device Error Count: 25 (device log contains only the most recent 8 errors)
110 CR = Command Register
111 FEATR = Features Register
112 COUNT = Count (was: Sector Count) Register
113 LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
114 LH = LBA High (was: Cylinder High) Register ] LBA
115 LM = LBA Mid (was: Cylinder Low) Register ] Register
116 LL = LBA Low (was: Sector Number) Register ]
117 DV = Device (was: Device/Head) Register
118 DC = Device Control Register
119 ER = Error register
120 ST = Status register
121Powered_Up_Time is measured from power on, and printed as
122DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
123SS=sec, and sss=millisec. It "wraps" after 49.710 days.
124
125Error 25 [0] occurred at disk power-on lifetime: 3854 hours (160 days + 14 hours)
126 When the command that caused the error occurred, the device was active or idle.
127
128 After command completion occurred, registers were:
129 ER -- ST COUNT LBA_48 LH LM LL DV DC
130 -- -- -- == -- == == == -- -- -- -- --
131 84 -- 51 00 80 00 00 00 c2 4f 09 40 00 Error: ICRC, ABRT at LBA = 0x00c24f09 = 12734217
132
133 Commands leading to the command that caused the error were:
134 CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
135 -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
136 61 00 80 00 80 00 00 00 c2 4f 09 40 ff 00:41:06.000 WRITE FPDMA QUEUED
137 61 00 80 00 80 00 00 00 c2 4f 09 40 00 00:41:06.000 WRITE FPDMA QUEUED
138 61 00 80 00 80 00 00 00 c2 4f 09 40 00 00:41:06.000 WRITE FPDMA QUEUED
139 61 00 80 00 80 00 00 00 c2 4f 09 40 00 00:41:06.000 WRITE FPDMA QUEUED
140 61 00 80 00 80 00 00 00 c2 4f 09 40 00 00:41:06.000 WRITE FPDMA QUEUED
141
142Error 24 [7] occurred at disk power-on lifetime: 3852 hours (160 days + 12 hours)
143 When the command that caused the error occurred, the device was active or idle.
144
145 After command completion occurred, registers were:
146 ER -- ST COUNT LBA_48 LH LM LL DV DC
147 -- -- -- == -- == == == -- -- -- -- --
148 04 -- 51 00 00 00 00 00 c2 4f 00 e0 00 Error: ABRT
149
150 Commands leading to the command that caused the error were:
151 CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
152 -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
153 b0 00 da 00 00 00 00 00 c2 4f 00 e0 04 00:01:59.000 SMART RETURN STATUS
154 c6 00 00 00 10 00 00 00 00 00 00 a0 04 00:00:26.000 SET MULTIPLE MODE
155 ef 00 03 00 45 00 00 00 00 00 00 a0 04 00:00:26.000 SET FEATURES [Set transfer mode]
156 ef 00 03 00 0c 00 00 00 00 00 00 a0 04 00:00:26.000 SET FEATURES [Set transfer mode]
157 ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:00:26.000 IDENTIFY DEVICE
158
159Error 23 [6] occurred at disk power-on lifetime: 3851 hours (160 days + 11 hours)
160 When the command that caused the error occurred, the device was active or idle.
161
162 After command completion occurred, registers were:
163 ER -- ST COUNT LBA_48 LH LM LL DV DC
164 -- -- -- == -- == == == -- -- -- -- --
165 04 -- 51 00 00 00 00 00 c2 4f 00 e0 00 Error: ABRT
166
167 Commands leading to the command that caused the error were:
168 CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
169 -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
170 b0 00 d0 00 00 00 00 00 c2 4f 00 e0 00 00:00:26.000 SMART READ DATA
171 ca 00 00 00 08 00 00 00 5e 6d 60 e0 00 00:00:26.000 WRITE DMA
172
173Error 22 [5] occurred at disk power-on lifetime: 3851 hours (160 days + 11 hours)
174 When the command that caused the error occurred, the device was active or idle.
175
176 After command completion occurred, registers were:
177 ER -- ST COUNT LBA_48 LH LM LL DV DC
178 -- -- -- == -- == == == -- -- -- -- --
179 04 -- 51 00 00 00 00 00 c2 4f 00 e0 00 Error: ABRT
180
181 Commands leading to the command that caused the error were:
182 CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
183 -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
184 b0 00 da 00 00 00 00 00 c2 4f 00 e0 04 00:00:26.000 SMART RETURN STATUS
185 c6 00 00 00 10 00 00 00 00 00 00 a0 04 00:00:25.000 SET MULTIPLE MODE
186 ef 00 03 00 45 00 00 00 00 00 00 a0 04 00:00:25.000 SET FEATURES [Set transfer mode]
187 ef 00 03 00 0c 00 00 00 00 00 00 a0 04 00:00:25.000 SET FEATURES [Set transfer mode]
188 ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:00:25.000 IDENTIFY DEVICE
189
190Error 21 [4] occurred at disk power-on lifetime: 3854 hours (160 days + 14 hours)
191 When the command that caused the error occurred, the device was active or idle.
192
193 After command completion occurred, registers were:
194 ER -- ST COUNT LBA_48 LH LM LL DV DC
195 -- -- -- == -- == == == -- -- -- -- --
196 84 -- 51 00 80 00 00 00 c2 4f 09 40 00 Error: ICRC, ABRT at LBA = 0x00c24f09 = 12734217
197
198 Commands leading to the command that caused the error were:
199 CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
200 -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
201 61 00 80 00 80 00 00 00 c2 4f 09 40 ff 00:41:06.000 WRITE FPDMA QUEUED
202 61 00 80 00 80 00 00 00 c2 4f 09 40 00 00:41:06.000 WRITE FPDMA QUEUED
203 61 00 80 00 80 00 00 00 c2 4f 09 40 00 00:41:06.000 WRITE FPDMA QUEUED
204 61 00 80 00 80 00 00 00 c2 4f 09 40 00 00:41:06.000 WRITE FPDMA QUEUED
205 61 00 80 00 80 00 00 00 c2 4f 09 40 00 00:41:06.000 WRITE FPDMA QUEUED
206
207Error 20 [3] occurred at disk power-on lifetime: 3852 hours (160 days + 12 hours)
208 When the command that caused the error occurred, the device was active or idle.
209
210 After command completion occurred, registers were:
211 ER -- ST COUNT LBA_48 LH LM LL DV DC
212 -- -- -- == -- == == == -- -- -- -- --
213 04 -- 51 00 00 00 00 00 c2 4f 00 e0 00 Error: ABRT
214
215 Commands leading to the command that caused the error were:
216 CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
217 -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
218 b0 00 da 00 00 00 00 00 c2 4f 00 e0 04 00:01:59.000 SMART RETURN STATUS
219 c6 00 00 00 10 00 00 00 00 00 00 a0 04 00:00:26.000 SET MULTIPLE MODE
220 ef 00 03 00 45 00 00 00 00 00 00 a0 04 00:00:26.000 SET FEATURES [Set transfer mode]
221 ef 00 03 00 0c 00 00 00 00 00 00 a0 04 00:00:26.000 SET FEATURES [Set transfer mode]
222 ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:00:26.000 IDENTIFY DEVICE
223
224Error 19 [2] occurred at disk power-on lifetime: 3851 hours (160 days + 11 hours)
225 When the command that caused the error occurred, the device was active or idle.
226
227 After command completion occurred, registers were:
228 ER -- ST COUNT LBA_48 LH LM LL DV DC
229 -- -- -- == -- == == == -- -- -- -- --
230 04 -- 51 00 00 00 00 00 c2 4f 00 e0 00 Error: ABRT
231
232 Commands leading to the command that caused the error were:
233 CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
234 -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
235 b0 00 d0 00 00 00 00 00 c2 4f 00 e0 00 00:00:26.000 SMART READ DATA
236 ca 00 00 00 08 00 00 00 5e 6d 60 e0 00 00:00:26.000 WRITE DMA
237
238Error 18 [1] occurred at disk power-on lifetime: 3851 hours (160 days + 11 hours)
239 When the command that caused the error occurred, the device was active or idle.
240
241 After command completion occurred, registers were:
242 ER -- ST COUNT LBA_48 LH LM LL DV DC
243 -- -- -- == -- == == == -- -- -- -- --
244 04 -- 51 00 00 00 00 00 c2 4f 00 e0 00 Error: ABRT
245
246 Commands leading to the command that caused the error were:
247 CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
248 -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
249 b0 00 da 00 00 00 00 00 c2 4f 00 e0 04 00:00:26.000 SMART RETURN STATUS
250 c6 00 00 00 10 00 00 00 00 00 00 a0 04 00:00:25.000 SET MULTIPLE MODE
251 ef 00 03 00 45 00 00 00 00 00 00 a0 04 00:00:25.000 SET FEATURES [Set transfer mode]
252 ef 00 03 00 0c 00 00 00 00 00 00 a0 04 00:00:25.000 SET FEATURES [Set transfer mode]
253 ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:00:25.000 IDENTIFY DEVICE
254
255Warning! SMART Extended Self-test Log Structure error: invalid SMART checksum.
256SMART Extended Self-test Log Version: 0 (1 sectors)
257Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
258# 1 Reserved (0x0e) Completed without error 150% 0 -
259# 2 Offline Completed without error 00% 0 -
260# 3 Offline Completed without error 00% 0 -
261
262SMART Selective self-test log data structure revision number 0
263Note: revision number not 1 implies that no selective self-test has ever been run
264 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
265 1 0 0 Not_testing
266 2 0 0 Not_testing
267 3 0 0 Not_testing
268 4 0 0 Not_testing
269 5 0 0 Not_testing
270Selective self-test flags (0x0):
271 After scanning selected spans, do NOT read-scan remainder of disk.
272If Selective self-test is pending on power-up, resume after 0 minute delay.
273
274SCT Status Version: 2
275SCT Version (vendor specific): 256 (0x0100)
276Device State: Active (0)
277Current Temperature: 31 Celsius
278Power Cycle Min/Max Temperature: --/40 Celsius
279Lifetime Min/Max Temperature: --/40 Celsius
280
281SCT Temperature History Version: 2
282Temperature Sampling Period: 1 minute
283Temperature Logging Interval: 1 minute
284Min/Max recommended Temperature: 10/105 Celsius
285Min/Max Temperature Limit: 5/110 Celsius
286Temperature History Size (Index): 128 (11)
287
288Index Estimated Time Temperature Celsius
289 12 2023-04-13 16:24 47 ****************************
290 ... ..( 43 skipped). .. ****************************
291 56 2023-04-13 17:08 47 ****************************
292 57 2023-04-13 17:09 48 *****************************
293 58 2023-04-13 17:10 48 *****************************
294 59 2023-04-13 17:11 48 *****************************
295 60 2023-04-13 17:12 ? -
296 61 2023-04-13 17:13 24 *****
297 62 2023-04-13 17:14 ? -
298 63 2023-04-13 17:15 ? -
299 64 2023-04-13 17:16 21 **
300 65 2023-04-13 17:17 ? -
301 66 2023-04-13 17:18 22 ***
302 67 2023-04-13 17:19 40 *********************
303 ... ..( 10 skipped). .. *********************
304 78 2023-04-13 17:30 40 *********************
305 79 2023-04-13 17:31 ? -
306 80 2023-04-13 17:32 36 *****************
307 81 2023-04-13 17:33 36 *****************
308 82 2023-04-13 17:34 35 ****************
309 83 2023-04-13 17:35 35 ****************
310 84 2023-04-13 17:36 35 ****************
311 85 2023-04-13 17:37 34 ***************
312 ... ..( 3 skipped). .. ***************
313 89 2023-04-13 17:41 34 ***************
314 90 2023-04-13 17:42 33 **************
315 91 2023-04-13 17:43 32 *************
316 ... ..( 4 skipped). .. *************
317 96 2023-04-13 17:48 32 *************
318 97 2023-04-13 17:49 31 ************
319 98 2023-04-13 17:50 31 ************
320 99 2023-04-13 17:51 32 *************
321 ... ..( 5 skipped). .. *************
322 105 2023-04-13 17:57 32 *************
323 106 2023-04-13 17:58 31 ************
324 ... ..( 10 skipped). .. ************
325 117 2023-04-13 18:09 31 ************
326 118 2023-04-13 18:10 30 ***********
327 ... ..( 15 skipped). .. ***********
328 6 2023-04-13 18:26 30 ***********
329 7 2023-04-13 18:27 31 ************
330 ... ..( 3 skipped). .. ************
331 11 2023-04-13 18:31 31 ************
332
333SCT Error Recovery Control:
334 Read: Disabled
335 Write: Disabled
336
337Device Statistics (GP/SMART Log 0x04) not supported
338
339Pending Defects log (GP Log 0x0c) not supported
340
341SATA Phy Event Counters (GP Log 0x11)
342ID Size Value Description
3430x0001 2 1 Command failed due to ICRC error
3440x0002 2 1 R_ERR response for data FIS
3450x0003 2 0 R_ERR response for device-to-host data FIS
3460x0004 2 1 R_ERR response for host-to-device data FIS
3470x0005 2 0 R_ERR response for non-data FIS
3480x0006 2 0 R_ERR response for device-to-host non-data FIS
3490x0007 2 0 R_ERR response for host-to-device non-data FIS
3500x0008 2 0 Device-to-host non-data FIS retries
3510x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy
3520x000a 2 3 Device-to-host register FISes sent due to a COMRESET
3530x000b 2 1 CRC errors within host-to-device FIS
3540x000d 2 0 Non-CRC errors within host-to-device FIS
3550x000f 2 1 R_ERR response for host-to-device data FIS, CRC
3560x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
3570x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
3580x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
359