| 1 | mikaey@backup-server:~/smartmontools-7.3$ sudo smartctl -a -d sat /dev/sdt
|
|---|
| 2 | smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.4.0-144-generic] (local build)
|
|---|
| 3 | Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 4 |
|
|---|
| 5 | === START OF INFORMATION SECTION ===
|
|---|
| 6 | Model Family: Seagate IronWolf
|
|---|
| 7 | Device Model: ST8000VN004-2M2101
|
|---|
| 8 | Serial Number: WSD9N1CW
|
|---|
| 9 | LU WWN Device Id: 5 000c50 0e63f3200
|
|---|
| 10 | Firmware Version: SC60
|
|---|
| 11 | User Capacity: 8,001,563,222,016 bytes [8.00 TB]
|
|---|
| 12 | Sector Sizes: 512 bytes logical, 4096 bytes physical
|
|---|
| 13 | Rotation Rate: 7200 rpm
|
|---|
| 14 | Form Factor: 3.5 inches
|
|---|
| 15 | Device is: In smartctl database 7.3/5319
|
|---|
| 16 | ATA Version is: ACS-4 (minor revision not indicated)
|
|---|
| 17 | SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
|
|---|
| 18 | Local Time is: Fri Mar 17 15:52:24 2023 CDT
|
|---|
| 19 | SMART support is: Available - device has SMART capability.
|
|---|
| 20 | SMART support is: Enabled
|
|---|
| 21 |
|
|---|
| 22 | === START OF READ SMART DATA SECTION ===
|
|---|
| 23 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 24 |
|
|---|
| 25 | General SMART Values:
|
|---|
| 26 | Offline data collection status: (0x82) Offline data collection activity
|
|---|
| 27 | was completed without error.
|
|---|
| 28 | Auto Offline Data Collection: Enabled.
|
|---|
| 29 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 30 | without error or no self-test has ever
|
|---|
| 31 | been run.
|
|---|
| 32 | Total time to complete Offline
|
|---|
| 33 | data collection: ( 559) seconds.
|
|---|
| 34 | Offline data collection
|
|---|
| 35 | capabilities: (0x7b) SMART execute Offline immediate.
|
|---|
| 36 | Auto Offline data collection on/off support.
|
|---|
| 37 | Suspend Offline collection upon new
|
|---|
| 38 | command.
|
|---|
| 39 | Offline surface scan supported.
|
|---|
| 40 | Self-test supported.
|
|---|
| 41 | Conveyance Self-test supported.
|
|---|
| 42 | Selective Self-test supported.
|
|---|
| 43 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 44 | power-saving mode.
|
|---|
| 45 | Supports SMART auto save timer.
|
|---|
| 46 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 47 | General Purpose Logging supported.
|
|---|
| 48 | Short self-test routine
|
|---|
| 49 | recommended polling time: ( 1) minutes.
|
|---|
| 50 | Extended self-test routine
|
|---|
| 51 | recommended polling time: ( 711) minutes.
|
|---|
| 52 | Conveyance self-test routine
|
|---|
| 53 | recommended polling time: ( 2) minutes.
|
|---|
| 54 | SCT capabilities: (0x50bd) SCT Status supported.
|
|---|
| 55 | SCT Error Recovery Control supported.
|
|---|
| 56 | SCT Feature Control supported.
|
|---|
| 57 | SCT Data Table supported.
|
|---|
| 58 |
|
|---|
| 59 | SMART Attributes Data Structure revision number: 10
|
|---|
| 60 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 61 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|---|
| 62 | 1 Raw_Read_Error_Rate 0x000f 076 064 044 Pre-fail Always - 40563058
|
|---|
| 63 | 3 Spin_Up_Time 0x0003 092 092 000 Pre-fail Always - 0
|
|---|
| 64 | 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 4
|
|---|
| 65 | 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
|
|---|
| 66 | 7 Seek_Error_Rate 0x000f 073 060 045 Pre-fail Always - 18087834
|
|---|
| 67 | 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 307
|
|---|
| 68 | 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
|
|---|
| 69 | 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 4
|
|---|
| 70 | 18 Head_Health 0x000b 100 100 050 Pre-fail Always - 0
|
|---|
| 71 | 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 72 | 188 Command_Timeout 0x0032 100 098 000 Old_age Always - 12885098499
|
|---|
| 73 | 190 Airflow_Temperature_Cel 0x0022 064 060 040 Old_age Always - 36 (Min/Max 36/39)
|
|---|
| 74 | 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 2
|
|---|
| 75 | 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 124
|
|---|
| 76 | 194 Temperature_Celsius 0x0022 036 040 000 Old_age Always - 36 (0 23 0 0 0)
|
|---|
| 77 | 195 Hardware_ECC_Recovered 0x001a 076 064 000 Old_age Always - 40563058
|
|---|
| 78 | 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
|
|---|
| 79 | 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
|
|---|
| 80 | 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
|
|---|
| 81 | 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 250h+48m+08.010s
|
|---|
| 82 | 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2791791483
|
|---|
| 83 | 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 178460322
|
|---|
| 84 |
|
|---|
| 85 | SMART Error Log Version: 1
|
|---|
| 86 | No Errors Logged
|
|---|
| 87 |
|
|---|
| 88 | SMART Self-test log structure revision number 1
|
|---|
| 89 | No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|---|
| 90 |
|
|---|
| 91 | SMART Selective self-test log data structure revision number 1
|
|---|
| 92 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 93 | 1 0 0 Not_testing
|
|---|
| 94 | 2 0 0 Not_testing
|
|---|
| 95 | 3 0 0 Not_testing
|
|---|
| 96 | 4 0 0 Not_testing
|
|---|
| 97 | 5 0 0 Not_testing
|
|---|
| 98 | Selective self-test flags (0x0):
|
|---|
| 99 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 100 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 101 |
|
|---|
