1 | smartctl 5.40 2010-10-16 r3189 [FreeBSD 8.2-RELEASE amd64] (local build)
|
---|
2 | Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Device Model: INTEL SSDSC2MH120A2
|
---|
6 | Serial Number: LNEL111501CW120CGN
|
---|
7 | Firmware Version: PPG2
|
---|
8 | User Capacity: 120,034,123,776 bytes
|
---|
9 | Device is: Not in smartctl database [for details use: -P showall]
|
---|
10 | ATA Version is: 8
|
---|
11 | ATA Standard is: ATA-8-ACS revision 2d
|
---|
12 | Local Time is: Tue May 3 17:52:49 2011 PDT
|
---|
13 | SMART support is: Available - device has SMART capability.
|
---|
14 | SMART support is: Enabled
|
---|
15 |
|
---|
16 | === START OF READ SMART DATA SECTION ===
|
---|
17 | SMART overall-health self-assessment test result: PASSED
|
---|
18 |
|
---|
19 | General SMART Values:
|
---|
20 | Offline data collection status: (0x00) Offline data collection activity
|
---|
21 | was never started.
|
---|
22 | Auto Offline Data Collection: Disabled.
|
---|
23 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
24 | without error or no self-test has ever
|
---|
25 | been run.
|
---|
26 | Total time to complete Offline
|
---|
27 | data collection: ( 10) seconds.
|
---|
28 | Offline data collection
|
---|
29 | capabilities: (0x15) SMART execute Offline immediate.
|
---|
30 | No Auto Offline data collection support.
|
---|
31 | Abort Offline collection upon new
|
---|
32 | command.
|
---|
33 | No Offline surface scan supported.
|
---|
34 | Self-test supported.
|
---|
35 | No Conveyance Self-test supported.
|
---|
36 | No Selective Self-test supported.
|
---|
37 | SMART capabilities: (0x0002) Does not save SMART data before
|
---|
38 | entering power-saving mode.
|
---|
39 | Supports SMART auto save timer.
|
---|
40 | Error logging capability: (0x00) Error logging supported.
|
---|
41 | General Purpose Logging supported.
|
---|
42 | Short self-test routine
|
---|
43 | recommended polling time: ( 2) minutes.
|
---|
44 | Extended self-test routine
|
---|
45 | recommended polling time: ( 10) minutes.
|
---|
46 | SCT capabilities: (0x003d) SCT Status supported.
|
---|
47 | SCT Error Recovery Control supported.
|
---|
48 | SCT Feature Control supported.
|
---|
49 | SCT Data Table supported.
|
---|
50 |
|
---|
51 | SMART Attributes Data Structure revision number: 1
|
---|
52 | Vendor Specific SMART Attributes with Thresholds:
|
---|
53 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
---|
54 | 3 Spin_Up_Time 0x0020 100 100 000 Old_age Offline - 0
|
---|
55 | 4 Start_Stop_Count 0x0030 100 100 000 Old_age Offline - 0
|
---|
56 | 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0
|
---|
57 | 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 45
|
---|
58 | 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 19
|
---|
59 | 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 7
|
---|
60 | 225 Load_Cycle_Count 0x0030 100 100 000 Old_age Offline - 8365
|
---|
61 | 232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0
|
---|
62 | 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0
|
---|
63 |
|
---|
64 | Error SMART Error Log Read failed: Input/output error
|
---|
65 | Smartctl: SMART Error Log Read Failed
|
---|
66 | SMART Self-test log structure revision number 1
|
---|
67 | No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
---|
68 |
|
---|
69 |
|
---|
70 | Device does not support Selective Self Tests/Logging
|
---|