1 | smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.74-1-pve] (local build)
|
---|
2 | Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Device Model: SPCC Solid State Disk
|
---|
6 | Serial Number: 30041226481
|
---|
7 | LU WWN Device Id: 5 000000 000016646
|
---|
8 | Firmware Version: SN08921
|
---|
9 | User Capacity: 128 035 676 160 bytes [128 GB]
|
---|
10 | Sector Size: 512 bytes logical/physical
|
---|
11 | Rotation Rate: Solid State Device
|
---|
12 | Form Factor: 2.5 inches
|
---|
13 | TRIM Command: Available, deterministic, zeroed
|
---|
14 | Device is: Not in smartctl database [for details use: -P showall]
|
---|
15 | ATA Version is: ACS-4 (minor revision not indicated)
|
---|
16 | SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
---|
17 | Local Time is: Tue Jan 31 12:22:52 2023 CET
|
---|
18 | SMART support is: Available - device has SMART capability.
|
---|
19 | SMART support is: Enabled
|
---|
20 | AAM feature is: Unavailable
|
---|
21 | APM feature is: Unavailable
|
---|
22 | Rd look-ahead is: Enabled
|
---|
23 | Write cache is: Enabled
|
---|
24 | DSN feature is: Unavailable
|
---|
25 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
---|
26 | Wt Cache Reorder: Enabled
|
---|
27 |
|
---|
28 | === START OF READ SMART DATA SECTION ===
|
---|
29 | SMART overall-health self-assessment test result: PASSED
|
---|
30 |
|
---|
31 | General SMART Values:
|
---|
32 | Offline data collection status: (0x02) Offline data collection activity
|
---|
33 | was completed without error.
|
---|
34 | Auto Offline Data Collection: Disabled.
|
---|
35 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
36 | without error or no self-test has ever
|
---|
37 | been run.
|
---|
38 | Total time to complete Offline
|
---|
39 | data collection: ( 33) seconds.
|
---|
40 | Offline data collection
|
---|
41 | capabilities: (0x7b) SMART execute Offline immediate.
|
---|
42 | Auto Offline data collection on/off support.
|
---|
43 | Suspend Offline collection upon new
|
---|
44 | command.
|
---|
45 | Offline surface scan supported.
|
---|
46 | Self-test supported.
|
---|
47 | Conveyance Self-test supported.
|
---|
48 | Selective Self-test supported.
|
---|
49 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
50 | power-saving mode.
|
---|
51 | Supports SMART auto save timer.
|
---|
52 | Error logging capability: (0x01) Error logging supported.
|
---|
53 | General Purpose Logging supported.
|
---|
54 | Short self-test routine
|
---|
55 | recommended polling time: ( 2) minutes.
|
---|
56 | Extended self-test routine
|
---|
57 | recommended polling time: ( 2) minutes.
|
---|
58 | Conveyance self-test routine
|
---|
59 | recommended polling time: ( 2) minutes.
|
---|
60 | SCT capabilities: (0x0031) SCT Status supported.
|
---|
61 | SCT Feature Control supported.
|
---|
62 | SCT Data Table supported.
|
---|
63 |
|
---|
64 | SMART Attributes Data Structure revision number: 20
|
---|
65 | Vendor Specific SMART Attributes with Thresholds:
|
---|
66 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
---|
67 | 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0
|
---|
68 | 9 Power_On_Hours -O--C- 100 100 000 - 10887
|
---|
69 | 12 Power_Cycle_Count -O--C- 100 100 000 - 12
|
---|
70 | 167 Unknown_Attribute -O---K 100 100 000 - 0
|
---|
71 | 168 Unknown_Attribute -O--C- 100 100 000 - 0
|
---|
72 | 169 Unknown_Attribute PO--C- 100 100 010 - 0
|
---|
73 | 171 Unknown_Attribute -O--CK 100 100 000 - 1
|
---|
74 | 172 Unknown_Attribute -O--CK 100 100 000 - 4
|
---|
75 | 173 Unknown_Attribute -O--C- 200 200 000 - 7486127935372
|
---|
76 | 174 Unknown_Attribute -O---K 100 100 000 - 8
|
---|
77 | 175 Program_Fail_Count_Chip -O---K 100 100 010 - 0
|
---|
78 | 180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 099 099 000 - 88
|
---|
79 | 187 Reported_Uncorrect -O--CK 099 000 000 - 29
|
---|
80 | 192 Power-Off_Retract_Count -O--C- 100 100 000 - 12
|
---|
81 | 194 Temperature_Celsius -O---K 040 040 000 - 40 (Min/Max 40/40)
|
---|
82 | 206 Unknown_SSD_Attribute -O--CK 200 200 000 - 1742
|
---|
83 | 207 Unknown_SSD_Attribute -O--CK 200 200 000 - 254833
|
---|
84 | 208 Unknown_SSD_Attribute -O--CK 200 200 000 - 3980
|
---|
85 | 209 Unknown_SSD_Attribute -O--CK 200 200 000 - 1
|
---|
86 | 210 Unknown_Attribute -O--CK 200 200 000 - 254917
|
---|
87 | 211 Unknown_Attribute -O--CK 200 200 000 - 158019
|
---|
88 | 231 Unknown_SSD_Attribute PO---K 091 091 005 - 9
|
---|
89 | 241 Total_LBAs_Written -O--CK 100 100 000 - 131164
|
---|
90 | 242 Total_LBAs_Read -O--CK 100 100 000 - 1226
|
---|
91 | 245 Unknown_Attribute -O--CK 100 100 000 - 4290772927
|
---|
92 | ||||||_ K auto-keep
|
---|
93 | |||||__ C event count
|
---|
94 | ||||___ R error rate
|
---|
95 | |||____ S speed/performance
|
---|
96 | ||_____ O updated online
|
---|
97 | |______ P prefailure warning
|
---|
98 |
|
---|
99 | General Purpose Log Directory Version 1
|
---|
100 | SMART Log Directory Version 1 [multi-sector log support]
|
---|
101 | Address Access R/W Size Description
|
---|
102 | 0x00 GPL,SL R/O 1 Log Directory
|
---|
103 | 0x01 SL R/O 1 Summary SMART error log
|
---|
104 | 0x02 SL R/O 51 Comprehensive SMART error log
|
---|
105 | 0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
---|
106 | 0x04 GPL,SL R/O 8 Device Statistics log
|
---|
107 | 0x06 SL R/O 1 SMART self-test log
|
---|
108 | 0x07 GPL R/O 1 Extended self-test log
|
---|
109 | 0x09 SL R/W 1 Selective self-test log
|
---|
110 | 0x10 GPL R/O 1 NCQ Command Error log
|
---|
111 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
---|
112 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
---|
113 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
---|
114 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
---|
115 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
---|
116 |
|
---|
117 | SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
---|
118 | Device Error Count: 29
|
---|
119 | CR = Command Register
|
---|
120 | FEATR = Features Register
|
---|
121 | COUNT = Count (was: Sector Count) Register
|
---|
122 | LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
---|
123 | LH = LBA High (was: Cylinder High) Register ] LBA
|
---|
124 | LM = LBA Mid (was: Cylinder Low) Register ] Register
|
---|
125 | LL = LBA Low (was: Sector Number) Register ]
|
---|
126 | DV = Device (was: Device/Head) Register
|
---|
127 | DC = Device Control Register
|
---|
128 | ER = Error register
|
---|
129 | ST = Status register
|
---|
130 | Powered_Up_Time is measured from power on, and printed as
|
---|
131 | DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
---|
132 | SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
---|
133 |
|
---|
134 | Error 29 [28] occurred at disk power-on lifetime: 10886 hours (453 days + 14 hours)
|
---|
135 | When the command that caused the error occurred, the device was in an unknown state.
|
---|
136 |
|
---|
137 | After command completion occurred, registers were:
|
---|
138 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
139 | -- -- -- == -- == == == -- -- -- -- --
|
---|
140 | 40 -- 41 00 08 00 00 00 00 1a 80 40 00 Error: UNC at LBA = 0x00001a80 = 6784
|
---|
141 |
|
---|
142 | Commands leading to the command that caused the error were:
|
---|
143 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
144 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
145 | 60 00 08 00 00 00 00 00 00 1a 80 00 80 44d+07:51:09.412 READ FPDMA QUEUED
|
---|
146 | 2f 00 00 00 01 00 00 00 00 00 10 00 80 44d+07:51:06.812 READ LOG EXT
|
---|
147 | 60 00 08 00 00 00 00 00 00 1a 80 00 80 44d+07:51:06.812 READ FPDMA QUEUED
|
---|
148 | 2f 00 00 00 01 00 00 00 00 00 10 00 80 44d+07:51:04.212 READ LOG EXT
|
---|
149 | 60 00 80 00 00 00 00 00 00 1a 80 00 80 44d+07:51:04.212 READ FPDMA QUEUED
|
---|
150 |
|
---|
151 | Error 28 [27] occurred at disk power-on lifetime: 10886 hours (453 days + 14 hours)
|
---|
152 | When the command that caused the error occurred, the device was in an unknown state.
|
---|
153 |
|
---|
154 | After command completion occurred, registers were:
|
---|
155 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
156 | -- -- -- == -- == == == -- -- -- -- --
|
---|
157 | 40 -- 41 00 08 00 00 00 00 1a 80 40 00 Error: UNC at LBA = 0x00001a80 = 6784
|
---|
158 |
|
---|
159 | Commands leading to the command that caused the error were:
|
---|
160 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
161 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
162 | 60 00 08 00 00 00 00 00 00 1a 80 00 80 44d+07:51:06.812 READ FPDMA QUEUED
|
---|
163 | 2f 00 00 00 01 00 00 00 00 00 10 00 80 44d+07:51:04.212 READ LOG EXT
|
---|
164 | 60 00 80 00 00 00 00 00 00 1a 80 00 80 44d+07:51:04.212 READ FPDMA QUEUED
|
---|
165 | 2f 00 00 00 01 00 00 00 00 00 03 00 80 44d+07:51:01.512 READ LOG EXT
|
---|
166 | b0 00 d5 00 01 00 00 00 c2 4f 01 00 80 44d+07:51:01.512 SMART READ LOG
|
---|
167 |
|
---|
168 | Error 27 [26] occurred at disk power-on lifetime: 10886 hours (453 days + 14 hours)
|
---|
169 | When the command that caused the error occurred, the device was in an unknown state.
|
---|
170 |
|
---|
171 | After command completion occurred, registers were:
|
---|
172 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
173 | -- -- -- == -- == == == -- -- -- -- --
|
---|
174 | 40 -- 41 00 80 00 00 00 00 1a 80 40 00 Error: UNC at LBA = 0x00001a80 = 6784
|
---|
175 |
|
---|
176 | Commands leading to the command that caused the error were:
|
---|
177 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
178 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
179 | 60 00 80 00 00 00 00 00 00 1a 80 00 80 44d+07:51:04.212 READ FPDMA QUEUED
|
---|
180 | 2f 00 00 00 01 00 00 00 00 00 03 00 80 44d+07:51:01.512 READ LOG EXT
|
---|
181 | b0 00 d5 00 01 00 00 00 c2 4f 01 00 80 44d+07:51:01.512 SMART READ LOG
|
---|
182 | b0 00 d5 00 01 00 00 00 c2 4f 06 00 80 44d+07:51:01.512 SMART READ LOG
|
---|
183 | b0 00 d0 00 01 00 00 00 c2 4f 00 00 80 44d+07:51:01.512 SMART READ DATA
|
---|
184 |
|
---|
185 | Error 26 [25] occurred at disk power-on lifetime: 10860 hours (452 days + 12 hours)
|
---|
186 | When the command that caused the error occurred, the device was in an unknown state.
|
---|
187 |
|
---|
188 | After command completion occurred, registers were:
|
---|
189 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
190 | -- -- -- == -- == == == -- -- -- -- --
|
---|
191 | 40 -- 41 00 08 00 00 06 19 ea c8 40 00 Error:
|
---|
192 |
|
---|
193 | Commands leading to the command that caused the error were:
|
---|
194 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
195 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
196 | 00 00 00 00 00 00 00 0c 8f 30 28 40 00 44d+07:41:26.812 NOP [Abort queued commands]
|
---|
197 | ea 00 00 00 00 00 00 00 00 00 00 00 80 44d+07:41:24.112 FLUSH CACHE EXT
|
---|
198 | ea 00 00 00 00 00 00 00 00 00 00 00 80 44d+07:41:23.512 FLUSH CACHE EXT
|
---|
199 | ea 00 00 00 00 00 00 00 00 00 00 00 80 44d+07:41:23.512 FLUSH CACHE EXT
|
---|
200 | ea 00 00 00 00 00 00 00 00 00 00 00 80 44d+07:41:23.512 FLUSH CACHE EXT
|
---|
201 |
|
---|
202 | Error 25 [24] occurred at disk power-on lifetime: 10860 hours (452 days + 12 hours)
|
---|
203 | When the command that caused the error occurred, the device was in an unknown state.
|
---|
204 |
|
---|
205 | After command completion occurred, registers were:
|
---|
206 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
207 | -- -- -- == -- == == == -- -- -- -- --
|
---|
208 | 40 -- 41 00 08 00 00 06 18 b6 20 40 00 Error:
|
---|
209 |
|
---|
210 | Commands leading to the command that caused the error were:
|
---|
211 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
212 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
213 | 00 00 00 00 00 00 00 0e d7 4d a8 40 00 44d+07:41:17.112 NOP [Abort queued commands]
|
---|
214 | ea 00 00 00 00 00 00 00 00 00 00 00 80 44d+07:41:14.512 FLUSH CACHE EXT
|
---|
215 | ea 00 00 00 00 00 00 00 00 00 00 00 80 44d+07:41:14.512 FLUSH CACHE EXT
|
---|
216 | ea 00 00 00 00 00 00 00 00 00 00 00 80 44d+07:41:14.512 FLUSH CACHE EXT
|
---|
217 | ea 00 00 00 00 00 00 00 00 00 00 00 80 44d+07:41:14.512 FLUSH CACHE EXT
|
---|
218 |
|
---|
219 | Error 24 [23] occurred at disk power-on lifetime: 10860 hours (452 days + 12 hours)
|
---|
220 | When the command that caused the error occurred, the device was in an unknown state.
|
---|
221 |
|
---|
222 | After command completion occurred, registers were:
|
---|
223 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
224 | -- -- -- == -- == == == -- -- -- -- --
|
---|
225 | 40 -- 41 00 10 00 00 06 18 76 00 40 00 Error:
|
---|
226 |
|
---|
227 | Commands leading to the command that caused the error were:
|
---|
228 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
229 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
230 | 00 00 00 00 00 00 00 0c ed d1 b8 40 00 44d+07:41:10.712 NOP [Abort queued commands]
|
---|
231 | ea 00 00 00 00 00 00 00 00 00 00 00 80 44d+07:41:08.112 FLUSH CACHE EXT
|
---|
232 | ea 00 00 00 00 00 00 00 00 00 00 00 80 44d+07:41:08.012 FLUSH CACHE EXT
|
---|
233 | ea 00 00 00 00 00 00 00 00 00 00 00 80 44d+07:41:08.012 FLUSH CACHE EXT
|
---|
234 | ea 00 00 00 00 00 00 00 00 00 00 00 80 44d+07:41:07.912 FLUSH CACHE EXT
|
---|
235 |
|
---|
236 | Error 23 [22] occurred at disk power-on lifetime: 10860 hours (452 days + 12 hours)
|
---|
237 | When the command that caused the error occurred, the device was in an unknown state.
|
---|
238 |
|
---|
239 | After command completion occurred, registers were:
|
---|
240 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
241 | -- -- -- == -- == == == -- -- -- -- --
|
---|
242 | 40 -- 41 00 18 00 00 0c 82 93 98 40 00 Error:
|
---|
243 |
|
---|
244 | Commands leading to the command that caused the error were:
|
---|
245 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
246 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
247 | 00 00 00 00 00 00 00 0c ef 8c 78 40 00 44d+07:40:44.512 NOP [Abort queued commands]
|
---|
248 | ea 00 00 00 00 00 00 00 00 00 00 00 80 44d+07:40:41.012 FLUSH CACHE EXT
|
---|
249 | ea 00 00 00 00 00 00 00 00 00 00 00 80 44d+07:40:41.012 FLUSH CACHE EXT
|
---|
250 | ea 00 00 00 00 00 00 00 00 00 00 00 80 44d+07:40:39.512 FLUSH CACHE EXT
|
---|
251 | ea 00 00 00 00 00 00 00 00 00 00 00 80 44d+07:40:39.012 FLUSH CACHE EXT
|
---|
252 |
|
---|
253 | Error 22 [21] occurred at disk power-on lifetime: 10860 hours (452 days + 12 hours)
|
---|
254 | When the command that caused the error occurred, the device was in an unknown state.
|
---|
255 |
|
---|
256 | After command completion occurred, registers were:
|
---|
257 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
258 | -- -- -- == -- == == == -- -- -- -- --
|
---|
259 | 40 -- 41 00 10 00 00 0c 74 a9 90 40 00 Error:
|
---|
260 |
|
---|
261 | Commands leading to the command that caused the error were:
|
---|
262 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
263 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
264 | 00 00 00 00 00 00 00 0d d0 d7 a8 40 00 44d+07:40:35.712 NOP [Abort queued commands]
|
---|
265 | ea 00 00 00 00 00 00 00 00 00 00 00 80 44d+07:40:32.612 FLUSH CACHE EXT
|
---|
266 | ea 00 00 00 00 00 00 00 00 00 00 00 80 44d+07:40:32.312 FLUSH CACHE EXT
|
---|
267 | ea 00 00 00 00 00 00 00 00 00 00 00 80 44d+07:40:32.212 FLUSH CACHE EXT
|
---|
268 | ea 00 00 00 00 00 00 00 00 00 00 00 80 44d+07:40:31.212 FLUSH CACHE EXT
|
---|
269 |
|
---|
270 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
---|
271 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
---|
272 | # 1 Short offline Completed without error 00% 10887 -
|
---|
273 | # 2 Extended offline Completed without error 00% 10887 -
|
---|
274 | # 3 Extended offline Completed without error 00% 10860 -
|
---|
275 | # 4 Short offline Completed without error 00% 10853 -
|
---|
276 | # 5 Short offline Completed without error 00% 10829 -
|
---|
277 | # 6 Short offline Completed without error 00% 10805 -
|
---|
278 | # 7 Extended offline Completed without error 00% 10804 -
|
---|
279 | # 8 Short offline Completed without error 00% 10781 -
|
---|
280 | # 9 Short offline Completed without error 00% 10757 -
|
---|
281 | #10 Short offline Completed without error 00% 10733 -
|
---|
282 | #11 Short offline Completed without error 00% 10709 -
|
---|
283 | #12 Short offline Completed without error 00% 10685 -
|
---|
284 | #13 Short offline Completed without error 00% 10661 -
|
---|
285 | #14 Short offline Completed without error 00% 10637 -
|
---|
286 | #15 Extended offline Completed without error 00% 10636 -
|
---|
287 | #16 Short offline Completed without error 00% 10613 -
|
---|
288 | #17 Short offline Completed without error 00% 10589 -
|
---|
289 | #18 Short offline Completed without error 00% 10565 -
|
---|
290 | #19 Short offline Completed without error 00% 10541 -
|
---|
291 |
|
---|
292 | SMART Selective self-test log data structure revision number 1
|
---|
293 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
294 | 1 0 0 Not_testing
|
---|
295 | 2 0 0 Not_testing
|
---|
296 | 3 0 0 Not_testing
|
---|
297 | 4 0 0 Not_testing
|
---|
298 | 5 0 0 Not_testing
|
---|
299 | Selective self-test flags (0x0):
|
---|
300 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
301 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
302 |
|
---|
303 | SCT Status Version: 3
|
---|
304 | SCT Version (vendor specific): 1 (0x0001)
|
---|
305 | Device State: Active (0)
|
---|
306 | Current Temperature: 40 Celsius
|
---|
307 | Power Cycle Min/Max Temperature: ?/40 Celsius
|
---|
308 | Lifetime Min/Max Temperature: ?/ ? Celsius
|
---|
309 | Under/Over Temperature Limit Count: 0/0
|
---|
310 |
|
---|
311 | SCT Temperature History Version: 2
|
---|
312 | Temperature Sampling Period: 1 minute
|
---|
313 | Temperature Logging Interval: 1 minute
|
---|
314 | Min/Max recommended Temperature: -127/127 Celsius
|
---|
315 | Min/Max Temperature Limit: -127/127 Celsius
|
---|
316 | Temperature History Size (Index): 478 (304)
|
---|
317 |
|
---|
318 | Index Estimated Time Temperature Celsius
|
---|
319 | 305 2023-01-31 04:25 40 *********************
|
---|
320 | ... ..(476 skipped). .. *********************
|
---|
321 | 304 2023-01-31 12:22 40 *********************
|
---|
322 |
|
---|
323 | SCT Error Recovery Control command not supported
|
---|
324 |
|
---|
325 | Device Statistics (GP Log 0x04)
|
---|
326 | Page Offset Size Value Flags Description
|
---|
327 | 0x01 ===== = = === == General Statistics (rev 1) ==
|
---|
328 | 0x01 0x008 4 12 --- Lifetime Power-On Resets
|
---|
329 | 0x01 0x010 4 10887 --- Power-on Hours
|
---|
330 | 0x01 0x018 6 275070941645 --- Logical Sectors Written
|
---|
331 | 0x01 0x020 6 4200007657 --- Number of Write Commands
|
---|
332 | 0x01 0x028 6 2571899608 --- Logical Sectors Read
|
---|
333 | 0x01 0x030 6 117258488 --- Number of Read Commands
|
---|
334 | 0x01 0x038 6 10007715304616 --- Date and Time TimeStamp
|
---|
335 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
---|
336 | 0x07 0x008 1 255 N-- Percentage Used Endurance Indicator
|
---|
337 | |||_ C monitored condition met
|
---|
338 | ||__ D supports DSN
|
---|
339 | |___ N normalized value
|
---|
340 |
|
---|
341 | Pending Defects log (GP Log 0x0c) not supported
|
---|
342 |
|
---|
343 | SATA Phy Event Counters (GP Log 0x11)
|
---|
344 | ID Size Value Description
|
---|
345 | 0x0001 2 29 Command failed due to ICRC error
|
---|
346 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
---|
347 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
---|
348 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
---|
349 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
---|
350 | 0x0008 2 0 Device-to-host non-data FIS retries
|
---|
351 | 0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
|
---|
352 | 0x000a 4 46 Device-to-host register FISes sent due to a COMRESET
|
---|
353 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
---|
354 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
---|
355 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
---|
356 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
---|
357 |
|
---|