| 1 | smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.74-1-pve] (local build)
|
|---|
| 2 | Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: SSDPR-CX400-128-G2
|
|---|
| 6 | Serial Number: GY2015459
|
|---|
| 7 | LU WWN Device Id: 5 000000 0000029de
|
|---|
| 8 | Firmware Version: SN07373
|
|---|
| 9 | User Capacity: 128 035 676 160 bytes [128 GB]
|
|---|
| 10 | Sector Size: 512 bytes logical/physical
|
|---|
| 11 | Rotation Rate: Solid State Device
|
|---|
| 12 | Form Factor: 2.5 inches
|
|---|
| 13 | TRIM Command: Available, deterministic, zeroed
|
|---|
| 14 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 15 | ATA Version is: ACS-4 (minor revision not indicated)
|
|---|
| 16 | SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
|---|
| 17 | Local Time is: Tue Jan 31 12:22:22 2023 CET
|
|---|
| 18 | SMART support is: Available - device has SMART capability.
|
|---|
| 19 | SMART support is: Enabled
|
|---|
| 20 | AAM feature is: Unavailable
|
|---|
| 21 | APM feature is: Unavailable
|
|---|
| 22 | Rd look-ahead is: Enabled
|
|---|
| 23 | Write cache is: Enabled
|
|---|
| 24 | DSN feature is: Unavailable
|
|---|
| 25 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|---|
| 26 | Wt Cache Reorder: Enabled
|
|---|
| 27 |
|
|---|
| 28 | === START OF READ SMART DATA SECTION ===
|
|---|
| 29 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 30 |
|
|---|
| 31 | General SMART Values:
|
|---|
| 32 | Offline data collection status: (0x02) Offline data collection activity
|
|---|
| 33 | was completed without error.
|
|---|
| 34 | Auto Offline Data Collection: Disabled.
|
|---|
| 35 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 36 | without error or no self-test has ever
|
|---|
| 37 | been run.
|
|---|
| 38 | Total time to complete Offline
|
|---|
| 39 | data collection: ( 33) seconds.
|
|---|
| 40 | Offline data collection
|
|---|
| 41 | capabilities: (0x7b) SMART execute Offline immediate.
|
|---|
| 42 | Auto Offline data collection on/off support.
|
|---|
| 43 | Suspend Offline collection upon new
|
|---|
| 44 | command.
|
|---|
| 45 | Offline surface scan supported.
|
|---|
| 46 | Self-test supported.
|
|---|
| 47 | Conveyance Self-test supported.
|
|---|
| 48 | Selective Self-test supported.
|
|---|
| 49 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 50 | power-saving mode.
|
|---|
| 51 | Supports SMART auto save timer.
|
|---|
| 52 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 53 | General Purpose Logging supported.
|
|---|
| 54 | Short self-test routine
|
|---|
| 55 | recommended polling time: ( 2) minutes.
|
|---|
| 56 | Extended self-test routine
|
|---|
| 57 | recommended polling time: ( 2) minutes.
|
|---|
| 58 | Conveyance self-test routine
|
|---|
| 59 | recommended polling time: ( 2) minutes.
|
|---|
| 60 | SCT capabilities: (0x0031) SCT Status supported.
|
|---|
| 61 | SCT Feature Control supported.
|
|---|
| 62 | SCT Data Table supported.
|
|---|
| 63 |
|
|---|
| 64 | SMART Attributes Data Structure revision number: 20
|
|---|
| 65 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 66 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 67 | 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0
|
|---|
| 68 | 9 Power_On_Hours -O--C- 100 100 000 - 10156
|
|---|
| 69 | 12 Power_Cycle_Count -O--C- 100 100 000 - 14
|
|---|
| 70 | 167 Unknown_Attribute -O---K 100 100 000 - 0
|
|---|
| 71 | 168 Unknown_Attribute -O--C- 100 100 000 - 0
|
|---|
| 72 | 169 Unknown_Attribute PO--C- 100 100 010 - 0
|
|---|
| 73 | 171 Unknown_Attribute -O--CK 000 000 000 - 0
|
|---|
| 74 | 172 Unknown_Attribute -O--CK 000 000 000 - 0
|
|---|
| 75 | 173 Unknown_Attribute -O--C- 200 200 000 - 14783588602381
|
|---|
| 76 | 174 Unknown_Attribute -O---K 100 100 000 - 0
|
|---|
| 77 | 175 Program_Fail_Count_Chip -O---K 100 100 010 - 0
|
|---|
| 78 | 180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 36
|
|---|
| 79 | 187 Reported_Uncorrect -O--CK 100 000 000 - 0
|
|---|
| 80 | 192 Power-Off_Retract_Count -O--C- 100 100 000 - 14
|
|---|
| 81 | 194 Temperature_Celsius -O---K 040 040 000 - 40 (Min/Max 10/50)
|
|---|
| 82 | 206 Unknown_SSD_Attribute -O--CK 200 200 000 - 3442
|
|---|
| 83 | 207 Unknown_SSD_Attribute -O--CK 200 200 000 - 4748
|
|---|
| 84 | 208 Unknown_SSD_Attribute -O--CK 200 200 000 - 4621
|
|---|
| 85 | 209 Unknown_SSD_Attribute -O--CK 200 200 000 - 1
|
|---|
| 86 | 210 Unknown_Attribute -O--CK 200 200 000 - 15335
|
|---|
| 87 | 211 Unknown_Attribute -O--CK 200 200 000 - 11992
|
|---|
| 88 | 231 Unknown_SSD_Attribute PO---K 010 010 005 - 92
|
|---|
| 89 | 241 Total_LBAs_Written -O--CK 100 100 000 - 120561
|
|---|
| 90 | 242 Total_LBAs_Read -O--CK 100 100 000 - 1365
|
|---|
| 91 | 243 Unknown_Attribute -O--CK 050 050 000 - 8587640796
|
|---|
| 92 | 245 Unknown_Attribute -O--CK 100 100 000 - 26
|
|---|
| 93 | ||||||_ K auto-keep
|
|---|
| 94 | |||||__ C event count
|
|---|
| 95 | ||||___ R error rate
|
|---|
| 96 | |||____ S speed/performance
|
|---|
| 97 | ||_____ O updated online
|
|---|
| 98 | |______ P prefailure warning
|
|---|
| 99 |
|
|---|
| 100 | General Purpose Log Directory Version 1
|
|---|
| 101 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 102 | Address Access R/W Size Description
|
|---|
| 103 | 0x00 GPL,SL R/O 1 Log Directory
|
|---|
| 104 | 0x01 SL R/O 1 Summary SMART error log
|
|---|
| 105 | 0x02 SL R/O 51 Comprehensive SMART error log
|
|---|
| 106 | 0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
|---|
| 107 | 0x04 GPL,SL R/O 8 Device Statistics log
|
|---|
| 108 | 0x06 SL R/O 1 SMART self-test log
|
|---|
| 109 | 0x07 GPL R/O 1 Extended self-test log
|
|---|
| 110 | 0x09 SL R/W 1 Selective self-test log
|
|---|
| 111 | 0x10 GPL R/O 1 NCQ Command Error log
|
|---|
| 112 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
|---|
| 113 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|---|
| 114 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|---|
| 115 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
|---|
| 116 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|---|
| 117 |
|
|---|
| 118 | SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
|---|
| 119 | Device Error Count: 1
|
|---|
| 120 | CR = Command Register
|
|---|
| 121 | FEATR = Features Register
|
|---|
| 122 | COUNT = Count (was: Sector Count) Register
|
|---|
| 123 | LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
|---|
| 124 | LH = LBA High (was: Cylinder High) Register ] LBA
|
|---|
| 125 | LM = LBA Mid (was: Cylinder Low) Register ] Register
|
|---|
| 126 | LL = LBA Low (was: Sector Number) Register ]
|
|---|
| 127 | DV = Device (was: Device/Head) Register
|
|---|
| 128 | DC = Device Control Register
|
|---|
| 129 | ER = Error register
|
|---|
| 130 | ST = Status register
|
|---|
| 131 | Powered_Up_Time is measured from power on, and printed as
|
|---|
| 132 | DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
|---|
| 133 | SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
|---|
| 134 |
|
|---|
| 135 | Error 1 [0] occurred at disk power-on lifetime: 9028 hours (376 days + 4 hours)
|
|---|
| 136 | When the command that caused the error occurred, the device was in an unknown state.
|
|---|
| 137 |
|
|---|
| 138 | After command completion occurred, registers were:
|
|---|
| 139 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|---|
| 140 | -- -- -- == -- == == == -- -- -- -- --
|
|---|
| 141 | 84 -- 41 00 08 00 00 01 47 66 40 40 00
|
|---|
| 142 |
|
|---|
| 143 | Commands leading to the command that caused the error were:
|
|---|
| 144 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|---|
| 145 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|---|
| 146 | ea 00 00 00 00 00 00 00 00 00 00 00 80 06:46:01.808 FLUSH CACHE EXT
|
|---|
| 147 | ea 00 00 00 00 00 00 00 00 00 00 00 80 06:46:01.808 FLUSH CACHE EXT
|
|---|
| 148 | ea 00 00 00 00 00 00 00 00 00 00 00 80 06:46:01.808 FLUSH CACHE EXT
|
|---|
| 149 | ea 00 00 00 00 00 00 00 00 00 00 00 80 06:46:01.708 FLUSH CACHE EXT
|
|---|
| 150 | ea 00 00 00 00 00 00 00 00 00 00 00 80 06:46:01.708 FLUSH CACHE EXT
|
|---|
| 151 |
|
|---|
| 152 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
|---|
| 153 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 154 | # 1 Short offline Completed without error 00% 10156 -
|
|---|
| 155 | # 2 Short offline Completed without error 00% 10125 -
|
|---|
| 156 | # 3 Short offline Completed without error 00% 10103 -
|
|---|
| 157 | # 4 Short offline Completed without error 00% 10080 -
|
|---|
| 158 | # 5 Extended offline Completed without error 00% 10079 -
|
|---|
| 159 | # 6 Short offline Completed without error 00% 10058 -
|
|---|
| 160 | # 7 Short offline Completed without error 00% 10036 -
|
|---|
| 161 | # 8 Short offline Completed without error 00% 10013 -
|
|---|
| 162 | # 9 Short offline Completed without error 00% 9991 -
|
|---|
| 163 | #10 Short offline Completed without error 00% 9969 -
|
|---|
| 164 | #11 Short offline Completed without error 00% 9947 -
|
|---|
| 165 | #12 Short offline Completed without error 00% 9925 -
|
|---|
| 166 | #13 Extended offline Completed without error 00% 9924 -
|
|---|
| 167 | #14 Short offline Completed without error 00% 9903 -
|
|---|
| 168 | #15 Short offline Completed without error 00% 9881 -
|
|---|
| 169 | #16 Short offline Completed without error 00% 9859 -
|
|---|
| 170 | #17 Short offline Completed without error 00% 9836 -
|
|---|
| 171 | #18 Short offline Completed without error 00% 9814 -
|
|---|
| 172 | #19 Short offline Completed without error 00% 9792 -
|
|---|
| 173 |
|
|---|
| 174 | SMART Selective self-test log data structure revision number 1
|
|---|
| 175 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 176 | 1 0 0 Not_testing
|
|---|
| 177 | 2 0 0 Not_testing
|
|---|
| 178 | 3 0 0 Not_testing
|
|---|
| 179 | 4 0 0 Not_testing
|
|---|
| 180 | 5 0 0 Not_testing
|
|---|
| 181 | Selective self-test flags (0x0):
|
|---|
| 182 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 183 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 184 |
|
|---|
| 185 | SCT Status Version: 3
|
|---|
| 186 | SCT Version (vendor specific): 1 (0x0001)
|
|---|
| 187 | Device State: Active (0)
|
|---|
| 188 | Current Temperature: 40 Celsius
|
|---|
| 189 | Power Cycle Min/Max Temperature: ?/40 Celsius
|
|---|
| 190 | Lifetime Min/Max Temperature: ?/ ? Celsius
|
|---|
| 191 | Under/Over Temperature Limit Count: 0/0
|
|---|
| 192 |
|
|---|
| 193 | SCT Temperature History Version: 2
|
|---|
| 194 | Temperature Sampling Period: 1 minute
|
|---|
| 195 | Temperature Logging Interval: 1 minute
|
|---|
| 196 | Min/Max recommended Temperature: -127/127 Celsius
|
|---|
| 197 | Min/Max Temperature Limit: -127/127 Celsius
|
|---|
| 198 | Temperature History Size (Index): 478 (85)
|
|---|
| 199 |
|
|---|
| 200 | Index Estimated Time Temperature Celsius
|
|---|
| 201 | 86 2023-01-31 04:25 40 *********************
|
|---|
| 202 | ... ..(476 skipped). .. *********************
|
|---|
| 203 | 85 2023-01-31 12:22 40 *********************
|
|---|
| 204 |
|
|---|
| 205 | SCT Error Recovery Control command not supported
|
|---|
| 206 |
|
|---|
| 207 | Device Statistics (GP Log 0x04)
|
|---|
| 208 | Page Offset Size Value Flags Description
|
|---|
| 209 | 0x01 ===== = = === == General Statistics (rev 1) ==
|
|---|
| 210 | 0x01 0x008 4 14 --- Lifetime Power-On Resets
|
|---|
| 211 | 0x01 0x010 4 10156 --- Power-on Hours
|
|---|
| 212 | 0x01 0x018 6 252836733976 --- Logical Sectors Written
|
|---|
| 213 | 0x01 0x020 6 4407726815 --- Number of Write Commands
|
|---|
| 214 | 0x01 0x028 6 2863129624 --- Logical Sectors Read
|
|---|
| 215 | 0x01 0x030 6 114107444 --- Number of Read Commands
|
|---|
| 216 | 0x01 0x038 6 8239873220456 --- Date and Time TimeStamp
|
|---|
| 217 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
|---|
| 218 | 0x07 0x008 1 189 N-- Percentage Used Endurance Indicator
|
|---|
| 219 | |||_ C monitored condition met
|
|---|
| 220 | ||__ D supports DSN
|
|---|
| 221 | |___ N normalized value
|
|---|
| 222 |
|
|---|
| 223 | Pending Defects log (GP Log 0x0c) not supported
|
|---|
| 224 |
|
|---|
| 225 | SATA Phy Event Counters (GP Log 0x11)
|
|---|
| 226 | ID Size Value Description
|
|---|
| 227 | 0x0001 2 1 Command failed due to ICRC error
|
|---|
| 228 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
|---|
| 229 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
|---|
| 230 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|---|
| 231 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|---|
| 232 | 0x0008 2 0 Device-to-host non-data FIS retries
|
|---|
| 233 | 0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
|
|---|
| 234 | 0x000a 4 43 Device-to-host register FISes sent due to a COMRESET
|
|---|
| 235 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|---|
| 236 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
|---|
| 237 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
|---|
| 238 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
|---|
| 239 |
|
|---|
