| 1 | smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-1160.31.1.el7.x86_64] (local build)
|
|---|
| 2 | Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: HFS480G3H2X069N
|
|---|
| 6 | Add. Product Id: DELL(tm)
|
|---|
| 7 | Firmware Version: DZ00
|
|---|
| 8 | User Capacity: 480,103,981,056 bytes [480 GB]
|
|---|
| 9 | Sector Sizes: 512 bytes logical, 4096 bytes physical
|
|---|
| 10 | Rotation Rate: Solid State Device
|
|---|
| 11 | Form Factor: 2.5 inches
|
|---|
| 12 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 13 | ATA Version is: ACS-4 (minor revision not indicated)
|
|---|
| 14 | SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
|
|---|
| 15 | Local Time is: Fri Jan 20 21:32:51 2023 UTC
|
|---|
| 16 | SMART support is: Available - device has SMART capability.
|
|---|
| 17 | SMART support is: Enabled
|
|---|
| 18 | AAM feature is: Unavailable
|
|---|
| 19 | APM feature is: Unavailable
|
|---|
| 20 | Rd look-ahead is: Enabled
|
|---|
| 21 | Write cache is: Disabled
|
|---|
| 22 | DSN feature is: Unavailable
|
|---|
| 23 | ATA Security is: Unavailable
|
|---|
| 24 | Write SCT (Get) Feature Control Command failed: ATA return descriptor not supported by controller firmware
|
|---|
| 25 | Wt Cache Reorder: Unknown (SCT Feature Control command failed)
|
|---|
| 26 |
|
|---|
| 27 | === START OF READ SMART DATA SECTION ===
|
|---|
| 28 | SMART Status not supported: ATA return descriptor not supported by controller firmware
|
|---|
| 29 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 30 | Warning: This result is based on an Attribute check.
|
|---|
| 31 |
|
|---|
| 32 | General SMART Values:
|
|---|
| 33 | Offline data collection status: (0x02) Offline data collection activity
|
|---|
| 34 | was completed without error.
|
|---|
| 35 | Auto Offline Data Collection: Disabled.
|
|---|
| 36 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 37 | without error or no self-test has ever
|
|---|
| 38 | been run.
|
|---|
| 39 | Total time to complete Offline
|
|---|
| 40 | data collection: ( 110) seconds.
|
|---|
| 41 | Offline data collection
|
|---|
| 42 | capabilities: (0x19) SMART execute Offline immediate.
|
|---|
| 43 | No Auto Offline data collection support.
|
|---|
| 44 | Suspend Offline collection upon new
|
|---|
| 45 | command.
|
|---|
| 46 | Offline surface scan supported.
|
|---|
| 47 | Self-test supported.
|
|---|
| 48 | No Conveyance Self-test supported.
|
|---|
| 49 | No Selective Self-test supported.
|
|---|
| 50 | SMART capabilities: (0x0002) Does not save SMART data before
|
|---|
| 51 | entering power-saving mode.
|
|---|
| 52 | Supports SMART auto save timer.
|
|---|
| 53 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 54 | General Purpose Logging supported.
|
|---|
| 55 | Short self-test routine
|
|---|
| 56 | recommended polling time: ( 2) minutes.
|
|---|
| 57 | Extended self-test routine
|
|---|
| 58 | recommended polling time: ( 30) minutes.
|
|---|
| 59 | SCT capabilities: (0x003d) SCT Status supported.
|
|---|
| 60 | SCT Error Recovery Control supported.
|
|---|
| 61 | SCT Feature Control supported.
|
|---|
| 62 | SCT Data Table supported.
|
|---|
| 63 |
|
|---|
| 64 | SMART Attributes Data Structure revision number: 0
|
|---|
| 65 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 66 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 67 | 1 Raw_Read_Error_Rate -OSR-- 100 100 006 - 0
|
|---|
| 68 | 5 Reallocated_Sector_Ct PO--CK 100 100 002 - 0
|
|---|
| 69 | 9 Power_On_Hours -O--CK 089 089 000 - 9953
|
|---|
| 70 | 12 Power_Cycle_Count -O--CK 100 100 020 - 22
|
|---|
| 71 | 13 Read_Soft_Error_Rate -OSR-K 100 100 000 - 0
|
|---|
| 72 | 173 Unknown_Attribute -O--CK 100 100 000 - 0
|
|---|
| 73 | 175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0
|
|---|
| 74 | 179 Used_Rsvd_Blk_Cnt_Tot PO--CK 100 100 002 - 0
|
|---|
| 75 | 180 Unused_Rsvd_Blk_Cnt_Tot ----C- 100 100 000 - 734
|
|---|
| 76 | 181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0
|
|---|
| 77 | 182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0
|
|---|
| 78 | 194 Temperature_Celsius -O---- 074 063 000 - 26 (Min/Max 24/37)
|
|---|
| 79 | 195 Hardware_ECC_Recovered -O--CK 100 100 000 - 0
|
|---|
| 80 | 198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
|---|
| 81 | 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0
|
|---|
| 82 | 201 Unknown_SSD_Attribute PO--CK 100 100 050 - 0
|
|---|
| 83 | 202 Unknown_SSD_Attribute PO--CK 100 100 050 - 0
|
|---|
| 84 | 233 Media_Wearout_Indicator -O--CK 100 100 000 - 431
|
|---|
| 85 | 235 Unknown_Attribute -O--CK 100 100 000 - 431
|
|---|
| 86 | 241 Total_LBAs_Written -O--CK 100 100 000 - 423
|
|---|
| 87 | 245 Unknown_Attribute PO--CK 100 100 001 - 100
|
|---|
| 88 | ||||||_ K auto-keep
|
|---|
| 89 | |||||__ C event count
|
|---|
| 90 | ||||___ R error rate
|
|---|
| 91 | |||____ S speed/performance
|
|---|
| 92 | ||_____ O updated online
|
|---|
| 93 | |______ P prefailure warning
|
|---|
| 94 |
|
|---|
| 95 | General Purpose Log Directory Version 1
|
|---|
| 96 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 97 | Address Access R/W Size Description
|
|---|
| 98 | 0x00 GPL,SL R/O 1 Log Directory
|
|---|
| 99 | 0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
|---|
| 100 | 0x04 GPL,SL R/O 8 Device Statistics log
|
|---|
| 101 | 0x07 GPL R/O 2 Extended self-test log
|
|---|
| 102 | 0x10 GPL R/O 1 NCQ Command Error log
|
|---|
| 103 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
|---|
| 104 | 0x13 GPL R/O 1 SATA NCQ Send and Receive log
|
|---|
| 105 | 0x16 GPL - 1 Reserved for Serial ATA
|
|---|
| 106 | 0x2f GPL - 1 Set Sector Configuration
|
|---|
| 107 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|---|
| 108 | 0x80-0x98 GPL,SL R/W 16 Host vendor specific log
|
|---|
| 109 | 0x99-0x9a GPL,SL R/W 1 Host vendor specific log
|
|---|
| 110 | 0x9b-0x9f GPL,SL R/W 16 Host vendor specific log
|
|---|
| 111 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
|---|
| 112 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|---|
| 113 |
|
|---|
| 114 | SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
|---|
| 115 | No Errors Logged
|
|---|
| 116 |
|
|---|
| 117 | SMART Extended Self-test Log Version: 1 (2 sectors)
|
|---|
| 118 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 119 | # 1 Short offline Completed without error 00% 9952 -
|
|---|
| 120 | # 2 Short offline Completed without error 00% 3 -
|
|---|
| 121 | # 3 Extended offline Completed without error 00% 2 -
|
|---|
| 122 | # 4 Short offline Completed without error 00% 1 -
|
|---|
| 123 |
|
|---|
| 124 | Selective Self-tests/Logging not supported
|
|---|
| 125 |
|
|---|
| 126 | SCT Status Version: 3
|
|---|
| 127 | SCT Version (vendor specific): 1 (0x0001)
|
|---|
| 128 | Device State: Active (0)
|
|---|
| 129 | Current Temperature: 26 Celsius
|
|---|
| 130 | Power Cycle Min/Max Temperature: 24/33 Celsius
|
|---|
| 131 | Lifetime Min/Max Temperature: 24/37 Celsius
|
|---|
| 132 | Specified Max Operating Temperature: 65 Celsius
|
|---|
| 133 | Under/Over Temperature Limit Count: 0/0
|
|---|
| 134 | SMART Status: 0xc24f (PASSED)
|
|---|
| 135 |
|
|---|
| 136 | Write SCT Data Table failed: SMART WRITE LOG SECTOR may cause problems, try with -T permissive to force
|
|---|
| 137 | Read SCT Temperature History failed
|
|---|
| 138 |
|
|---|
| 139 | Write SCT (Get) Error Recovery Control Command failed: ATA return descriptor not supported by controller firmware
|
|---|
| 140 | SCT (Get) Error Recovery Control command failed
|
|---|
| 141 |
|
|---|
| 142 | Device Statistics (GP Log 0x04)
|
|---|
| 143 | Page Offset Size Value Flags Description
|
|---|
| 144 | 0x01 ===== = = === == General Statistics (rev 1) ==
|
|---|
| 145 | 0x01 0x008 4 22 --- Lifetime Power-On Resets
|
|---|
| 146 | 0x01 0x010 4 9953 --- Power-on Hours
|
|---|
| 147 | 0x01 0x018 6 904940532 --- Logical Sectors Written
|
|---|
| 148 | 0x01 0x020 6 32642192 --- Number of Write Commands
|
|---|
| 149 | 0x01 0x028 6 363462806 --- Logical Sectors Read
|
|---|
| 150 | 0x01 0x030 6 1057142 --- Number of Read Commands
|
|---|
| 151 | 0x01 0x038 6 35830800000 --- Date and Time TimeStamp
|
|---|
| 152 | 0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
|---|
| 153 | 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
|---|
| 154 | 0x04 0x010 4 2 --- Resets Between Cmd Acceptance and Completion
|
|---|
| 155 | 0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
|---|
| 156 | 0x05 0x008 1 26 --- Current Temperature
|
|---|
| 157 | 0x05 0x010 1 27 --- Average Short Term Temperature
|
|---|
| 158 | 0x05 0x018 1 26 --- Average Long Term Temperature
|
|---|
| 159 | 0x05 0x020 1 37 --- Highest Temperature
|
|---|
| 160 | 0x05 0x028 1 24 --- Lowest Temperature
|
|---|
| 161 | 0x05 0x030 1 37 --- Highest Average Short Term Temperature
|
|---|
| 162 | 0x05 0x038 1 24 --- Lowest Average Short Term Temperature
|
|---|
| 163 | 0x05 0x040 1 37 --- Highest Average Long Term Temperature
|
|---|
| 164 | 0x05 0x048 1 24 --- Lowest Average Long Term Temperature
|
|---|
| 165 | 0x05 0x050 4 0 --- Time in Over-Temperature
|
|---|
| 166 | 0x05 0x058 1 65 --- Specified Maximum Operating Temperature
|
|---|
| 167 | 0x05 0x060 4 0 --- Time in Under-Temperature
|
|---|
| 168 | 0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
|---|
| 169 | 0x06 ===== = = === == Transport Statistics (rev 1) ==
|
|---|
| 170 | 0x06 0x008 4 94 --- Number of Hardware Resets
|
|---|
| 171 | 0x06 0x018 4 0 --- Number of Interface CRC Errors
|
|---|
| 172 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
|---|
| 173 | 0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
|---|
| 174 | |||_ C monitored condition met
|
|---|
| 175 | ||__ D supports DSN
|
|---|
| 176 | |___ N normalized value
|
|---|
| 177 |
|
|---|
| 178 | Pending Defects log (GP Log 0x0c) not supported
|
|---|
| 179 |
|
|---|
| 180 | SATA Phy Event Counters (GP Log 0x11)
|
|---|
| 181 | ID Size Value Description
|
|---|
| 182 | 0x0001 2 0 Command failed due to ICRC error
|
|---|
| 183 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
|---|
| 184 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
|---|
| 185 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|---|
| 186 | 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET
|
|---|
| 187 | 0x000b 2 0 CRC errors within host-to-device FIS
|
|---|
| 188 | 0x000d 2 0 Non-CRC errors within host-to-device FIS
|
|---|
| 189 |
|
|---|
