1 | smartctl 7.1 2020-04-05 r5049 [x86_64-linux-5.15.8-1.el8.elrepo.x86_64] (local build)
|
---|
2 | Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Model Family: Western Digital Ultrastar DC HC550
|
---|
6 | Device Model: WUH721818ALE6L4
|
---|
7 | Serial Number: 5DG7W4MJ
|
---|
8 | LU WWN Device Id: 5 000cca 2b9c39483
|
---|
9 | Add. Product Id: 202211
|
---|
10 | Firmware Version: PCGAW660
|
---|
11 | User Capacity: 18,000,207,937,536 bytes [18.0 TB]
|
---|
12 | Sector Size: 4096 bytes logical/physical
|
---|
13 | Rotation Rate: 7200 rpm
|
---|
14 | Form Factor: 3.5 inches
|
---|
15 | Device is: In smartctl database [for details use: -P show]
|
---|
16 | ATA Version is: ACS-4 published, ANSI INCITS 529-2018
|
---|
17 | SATA Version is: SATA 3.3, 6.0 Gb/s (current: 3.0 Gb/s)
|
---|
18 | Local Time is: Tue Oct 11 16:42:02 2022 CEST
|
---|
19 | SMART support is: Available - device has SMART capability.
|
---|
20 | SMART support is: Enabled
|
---|
21 |
|
---|
22 | === START OF READ SMART DATA SECTION ===
|
---|
23 | SMART overall-health self-assessment test result: PASSED
|
---|
24 |
|
---|
25 | General SMART Values:
|
---|
26 | Offline data collection status: (0x80) Offline data collection activity
|
---|
27 | was never started.
|
---|
28 | Auto Offline Data Collection: Enabled.
|
---|
29 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
30 | without error or no self-test has ever
|
---|
31 | been run.
|
---|
32 | Total time to complete Offline
|
---|
33 | data collection: ( 101) seconds.
|
---|
34 | Offline data collection
|
---|
35 | capabilities: (0x5b) SMART execute Offline immediate.
|
---|
36 | Auto Offline data collection on/off support.
|
---|
37 | Suspend Offline collection upon new
|
---|
38 | command.
|
---|
39 | Offline surface scan supported.
|
---|
40 | Self-test supported.
|
---|
41 | No Conveyance Self-test supported.
|
---|
42 | Selective Self-test supported.
|
---|
43 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
44 | power-saving mode.
|
---|
45 | Supports SMART auto save timer.
|
---|
46 | Error logging capability: (0x01) Error logging supported.
|
---|
47 | General Purpose Logging supported.
|
---|
48 | Short self-test routine
|
---|
49 | recommended polling time: ( 2) minutes.
|
---|
50 | Extended self-test routine
|
---|
51 | recommended polling time: (1927) minutes.
|
---|
52 | SCT capabilities: (0x003d) SCT Status supported.
|
---|
53 | SCT Error Recovery Control supported.
|
---|
54 | SCT Feature Control supported.
|
---|
55 | SCT Data Table supported.
|
---|
56 |
|
---|
57 | SMART Attributes Data Structure revision number: 16
|
---|
58 | Vendor Specific SMART Attributes with Thresholds:
|
---|
59 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
---|
60 | 1 Raw_Read_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0
|
---|
61 | 2 Throughput_Performance 0x0005 100 100 054 Pre-fail Offline - 0
|
---|
62 | 3 Spin_Up_Time 0x0007 082 082 001 Pre-fail Always - 358 (Average 359)
|
---|
63 | 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 13
|
---|
64 | 5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 0
|
---|
65 | 7 Seek_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0
|
---|
66 | 8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0
|
---|
67 | 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 26
|
---|
68 | 10 Spin_Retry_Count 0x0013 100 100 001 Pre-fail Always - 0
|
---|
69 | 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 10
|
---|
70 | 22 Helium_Level 0x0023 100 100 025 Pre-fail Always - 100
|
---|
71 | 82 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 255
|
---|
72 | 184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0
|
---|
73 | 188 Command_Timeout 0x0032 096 096 000 Old_age Always - 4
|
---|
74 | 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 20
|
---|
75 | 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 20
|
---|
76 | 194 Temperature_Celsius 0x0002 064 064 000 Old_age Always - 31 (Min/Max 23/47)
|
---|
77 | 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
|
---|
78 | 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
|
---|
79 | 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
|
---|
80 | 199 UDMA_CRC_Error_Count 0x000a 100 100 000 Old_age Always - 1
|
---|
81 | 241 Total_LBAs_Written 0x0012 100 100 000 Old_age Always - 258361234
|
---|
82 | 242 Total_LBAs_Read 0x0012 100 100 000 Old_age Always - 16261
|
---|
83 |
|
---|
84 | SMART Error Log Version: 1
|
---|
85 | ATA Error Count: 1
|
---|
86 | CR = Command Register [HEX]
|
---|
87 | FR = Features Register [HEX]
|
---|
88 | SC = Sector Count Register [HEX]
|
---|
89 | SN = Sector Number Register [HEX]
|
---|
90 | CL = Cylinder Low Register [HEX]
|
---|
91 | CH = Cylinder High Register [HEX]
|
---|
92 | DH = Device/Head Register [HEX]
|
---|
93 | DC = Device Command Register [HEX]
|
---|
94 | ER = Error register [HEX]
|
---|
95 | ST = Status register [HEX]
|
---|
96 | Powered_Up_Time is measured from power on, and printed as
|
---|
97 | DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
---|
98 | SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
---|
99 |
|
---|
100 | Error 1 occurred at disk power-on lifetime: 8 hours (0 days + 8 hours)
|
---|
101 | When the command that caused the error occurred, the device was active or idle.
|
---|
102 |
|
---|
103 | After command completion occurred, registers were:
|
---|
104 | ER ST SC SN CL CH DH
|
---|
105 | -- -- -- -- -- -- --
|
---|
106 | 84 43 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
|
---|
107 |
|
---|
108 | Commands leading to the command that caused the error were:
|
---|
109 | CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
---|
110 | -- -- -- -- -- -- -- -- ---------------- --------------------
|
---|
111 | 60 00 60 00 00 00 40 08 00:01:39.962 READ FPDMA QUEUED
|
---|
112 | ec 00 01 00 00 00 00 08 00:01:34.025 IDENTIFY DEVICE
|
---|
113 | ec 00 01 00 00 00 00 08 00:01:34.025 IDENTIFY DEVICE
|
---|
114 | 2f 00 01 2f 00 00 e0 08 00:01:18.152 READ LOG EXT
|
---|
115 | 2f 00 01 00 00 00 e0 08 00:01:18.152 READ LOG EXT
|
---|
116 |
|
---|
117 | SMART Self-test log structure revision number 1
|
---|
118 | No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
---|
119 |
|
---|
120 | SMART Selective self-test log data structure revision number 1
|
---|
121 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
122 | 1 0 0 Not_testing
|
---|
123 | 2 0 0 Not_testing
|
---|
124 | 3 0 0 Not_testing
|
---|
125 | 4 0 0 Not_testing
|
---|
126 | 5 0 0 Not_testing
|
---|
127 | Selective self-test flags (0x0):
|
---|
128 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
129 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
130 |
|
---|