Ticket #1657: smartctl_x_output.txt

File smartctl_x_output.txt, 8.0 KB (added by kobegao, 19 months ago)
Line 
1smartctl 6.5 2016-01-24 r4214 [x86_64-linux-5.4.0-050400-generic] (local build)
2Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
3
4=== START OF INFORMATION SECTION ===
5Device Model: ST250-M280 256GB SSD
6Serial Number: 122138300838
7LU WWN Device Id: 5 000000 a85a49726
8Firmware Version: SFMD6110
9User Capacity: 240,057,409,536 bytes [240 GB]
10Sector Size: 512 bytes logical/physical
11Rotation Rate: Solid State Device
12Form Factor: 2.5 inches
13Device is: Not in smartctl database [for details use: -P showall]
14ATA Version is: Unknown(0x0bf8) (minor revision not indicated)
15SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
16Local Time is: Fri Oct 7 13:51:17 2022 CST
17SMART support is: Available - device has SMART capability.
18SMART support is: Enabled
19AAM feature is: Unavailable
20APM feature is: Unavailable
21Rd look-ahead is: Enabled
22Write cache is: Enabled
23ATA Security is: Disabled, frozen [SEC2]
24Wt Cache Reorder: Enabled
25
26=== START OF READ SMART DATA SECTION ===
27SMART overall-health self-assessment test result: PASSED
28
29General SMART Values:
30Offline data collection status: (0x00) Offline data collection activity
31 was never started.
32 Auto Offline Data Collection: Disabled.
33Self-test execution status: ( 0) The previous self-test routine completed
34 without error or no self-test has ever
35 been run.
36Total time to complete Offline
37data collection: ( 33) seconds.
38Offline data collection
39capabilities: (0x7b) SMART execute Offline immediate.
40 Auto Offline data collection on/off support.
41 Suspend Offline collection upon new
42 command.
43 Offline surface scan supported.
44 Self-test supported.
45 Conveyance Self-test supported.
46 Selective Self-test supported.
47SMART capabilities: (0x0003) Saves SMART data before entering
48 power-saving mode.
49 Supports SMART auto save timer.
50Error logging capability: (0x01) Error logging supported.
51 General Purpose Logging supported.
52Short self-test routine
53recommended polling time: ( 2) minutes.
54Extended self-test routine
55recommended polling time: ( 2) minutes.
56Conveyance self-test routine
57recommended polling time: ( 2) minutes.
58SCT capabilities: (0x0031) SCT Status supported.
59 SCT Feature Control supported.
60 SCT Data Table supported.
61
62SMART Attributes Data Structure revision number: 0
63Vendor Specific SMART Attributes with Thresholds:
64ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
65 9 Power_On_Hours -O--CK 100 100 000 - 2
66 12 Power_Cycle_Count -O--CK 100 100 000 - 4
67163 Unknown_Attribute -O--CK 100 100 000 - 1
68164 Unknown_Attribute -O--CK 100 100 000 - 1
69166 Unknown_Attribute -O--CK 100 100 000 - 0
70167 Unknown_Attribute -O--CK 100 100 000 - 0
71168 Unknown_Attribute -O--CK 100 100 000 - 0
72171 Unknown_Attribute -O--CK 100 100 000 - 0
73172 Unknown_Attribute -O--CK 100 100 000 - 0
74175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0
75192 Power-Off_Retract_Count -O--CK 100 100 000 - 3
76194 Temperature_Celsius -O---K 074 069 030 - 26 (Min/Max 26/31)
77231 Temperature_Celsius -O--C- 100 100 000 - 100
78241 Total_LBAs_Written -O--CK 100 100 000 - 120
79 ||||||_ K auto-keep
80 |||||__ C event count
81 ||||___ R error rate
82 |||____ S speed/performance
83 ||_____ O updated online
84 |______ P prefailure warning
85
86General Purpose Log Directory Version 1
87SMART Log Directory Version 1 [multi-sector log support]
88Address Access R/W Size Description
890x00 GPL,SL R/O 1 Log Directory
900x01 SL R/O 1 Summary SMART error log
910x02 SL R/O 51 Comprehensive SMART error log
920x03 GPL R/O 64 Ext. Comprehensive SMART error log
930x04 GPL,SL R/O 8 Device Statistics log
940x06 SL R/O 1 SMART self-test log
950x07 GPL R/O 1 Extended self-test log
960x09 SL R/W 1 Selective self-test log
970x10 GPL R/O 1 SATA NCQ Queued Error log
980x11 GPL R/O 1 SATA Phy Event Counters log
990x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
1000x80-0x9f GPL,SL R/W 16 Host vendor specific log
1010xe0 GPL,SL R/W 1 SCT Command/Status
1020xe1 GPL,SL R/W 1 SCT Data Transfer
103
104SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
105No Errors Logged
106
107SMART Extended Self-test Log Version: 1 (1 sectors)
108No self-tests have been logged. [To run self-tests, use: smartctl -t]
109
110SMART Selective self-test log data structure revision number 1
111 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
112 1 0 0 Not_testing
113 2 0 0 Not_testing
114 3 0 0 Not_testing
115 4 0 0 Not_testing
116 5 0 0 Not_testing
117Selective self-test flags (0x0):
118 After scanning selected spans, do NOT read-scan remainder of disk.
119If Selective self-test is pending on power-up, resume after 0 minute delay.
120
121SCT Status Version: 3
122SCT Version (vendor specific): 1 (0x0001)
123SCT Support Level: 0
124Device State: Active (0)
125Current Temperature: ? Celsius
126Power Cycle Min/Max Temperature: ?/ ? Celsius
127Lifetime Min/Max Temperature: ?/ ? Celsius
128Under/Over Temperature Limit Count: 0/0
129
130SCT Temperature History Version: 2
131Temperature Sampling Period: 1 minute
132Temperature Logging Interval: 1 minute
133Min/Max recommended Temperature: -127/127 Celsius
134Min/Max Temperature Limit: -127/127 Celsius
135Temperature History Size (Index): 478 (6)
136
137Index Estimated Time Temperature Celsius
138 7 2022-10-07 05:54 ? -
139 ... ..(471 skipped). .. -
140 1 2022-10-07 13:46 ? -
141 2 2022-10-07 13:47 30 ***********
142 3 2022-10-07 13:48 31 ************
143 4 2022-10-07 13:49 31 ************
144 5 2022-10-07 13:50 ? -
145 6 2022-10-07 13:51 ? -
146
147SCT Error Recovery Control command not supported
148
149Device Statistics (GP Log 0x04)
150Page Offset Size Value Flags Description
1510x01 ===== = = === == General Statistics (rev 1) ==
1520x01 0x008 4 4 --- Lifetime Power-On Resets
1530x01 0x010 4 2 --- Power-on Hours
1540x01 0x018 6 120 --- Logical Sectors Written
1550x01 0x020 6 0 --- Number of Write Commands
1560x01 0x028 6 8466 --- Logical Sectors Read
1570x01 0x030 6 160 --- Number of Read Commands
1580x01 0x038 6 46900 --- Date and Time TimeStamp
1590x07 ===== = = === == Solid State Device Statistics (rev 1) ==
1600x07 0x008 1 0 N-- Percentage Used Endurance Indicator
161 |||_ C monitored condition met
162 ||__ D supports DSN
163 |___ N normalized value
164
165SATA Phy Event Counters (GP Log 0x11)
166ID Size Value Description
1670x0001 2 0 Command failed due to ICRC error
1680x0003 2 0 R_ERR response for device-to-host data FIS
1690x0004 2 0 R_ERR response for host-to-device data FIS
1700x0006 2 0 R_ERR response for device-to-host non-data FIS
1710x0007 2 0 R_ERR response for host-to-device non-data FIS
1720x0008 2 0 Device-to-host non-data FIS retries
1730x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
1740x000a 4 1 Device-to-host register FISes sent due to a COMRESET
1750x000f 2 0 R_ERR response for host-to-device data FIS, CRC
1760x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
1770x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
1780x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
179