| 1 | smartctl pre-7.4 2022-09-18 r5409 [x86_64-linux-6.5.0] (local build) |
|---|
| 2 | Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org |
|---|
| 3 | |
|---|
| 4 | === START OF INFORMATION SECTION === |
|---|
| 5 | Device Model: INTEL SSDSC2BB240G4C |
|---|
| 6 | Firmware Version: D201FJ14 |
|---|
| 7 | User Capacity: 240,057,409,536 bytes [240 GB] |
|---|
| 8 | Sector Sizes: 512 bytes logical, 4096 bytes physical |
|---|
| 9 | Rotation Rate: Solid State Device |
|---|
| 10 | Form Factor: 2.5 inches |
|---|
| 11 | TRIM Command: Available, deterministic, zeroed |
|---|
| 12 | Device is: Not in smartctl database 7.3/5405 |
|---|
| 13 | ATA Version is: ACS-2 T13/2015-D revision 3 |
|---|
| 14 | SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) |
|---|
| 15 | Local Time is: Sun Oct 2 08:58:14 2022 UTC |
|---|
| 16 | SMART support is: Available - device has SMART capability. |
|---|
| 17 | SMART support is: Enabled |
|---|
| 18 | AAM feature is: Unavailable |
|---|
| 19 | APM feature is: Unavailable |
|---|
| 20 | Rd look-ahead is: Enabled |
|---|
| 21 | Write cache is: Enabled |
|---|
| 22 | DSN feature is: Unavailable |
|---|
| 23 | ATA Security is: Disabled, frozen [SEC2] |
|---|
| 24 | Write SCT (Get) Feature Control Command failed: scsi error unsupported field in scsi command |
|---|
| 25 | Wt Cache Reorder: Unknown (SCT Feature Control command failed) |
|---|
| 26 | |
|---|
| 27 | === START OF READ SMART DATA SECTION === |
|---|
| 28 | SMART Status command failed: scsi error unsupported field in scsi command |
|---|
| 29 | SMART overall-health self-assessment test result: PASSED |
|---|
| 30 | Warning: This result is based on an Attribute check. |
|---|
| 31 | |
|---|
| 32 | General SMART Values: |
|---|
| 33 | Offline data collection status: (0x00) Offline data collection activity |
|---|
| 34 | was never started. |
|---|
| 35 | Auto Offline Data Collection: Disabled. |
|---|
| 36 | Self-test execution status: ( 0) The previous self-test routine completed |
|---|
| 37 | without error or no self-test has ever |
|---|
| 38 | been run. |
|---|
| 39 | Total time to complete Offline |
|---|
| 40 | data collection: ( 0) seconds. |
|---|
| 41 | Offline data collection |
|---|
| 42 | capabilities: (0x79) SMART execute Offline immediate. |
|---|
| 43 | No Auto Offline data collection support. |
|---|
| 44 | Suspend Offline collection upon new |
|---|
| 45 | command. |
|---|
| 46 | Offline surface scan supported. |
|---|
| 47 | Self-test supported. |
|---|
| 48 | Conveyance Self-test supported. |
|---|
| 49 | Selective Self-test supported. |
|---|
| 50 | SMART capabilities: (0x0003) Saves SMART data before entering |
|---|
| 51 | power-saving mode. |
|---|
| 52 | Supports SMART auto save timer. |
|---|
| 53 | Error logging capability: (0x01) Error logging supported. |
|---|
| 54 | General Purpose Logging supported. |
|---|
| 55 | Short self-test routine |
|---|
| 56 | recommended polling time: ( 1) minutes. |
|---|
| 57 | Extended self-test routine |
|---|
| 58 | recommended polling time: ( 2) minutes. |
|---|
| 59 | Conveyance self-test routine |
|---|
| 60 | recommended polling time: ( 2) minutes. |
|---|
| 61 | SCT capabilities: (0x003d) SCT Status supported. |
|---|
| 62 | SCT Error Recovery Control supported. |
|---|
| 63 | SCT Feature Control supported. |
|---|
| 64 | SCT Data Table supported. |
|---|
| 65 | |
|---|
| 66 | SMART Attributes Data Structure revision number: 1 |
|---|
| 67 | Vendor Specific SMART Attributes with Thresholds: |
|---|
| 68 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE |
|---|
| 69 | 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 |
|---|
| 70 | 9 Power_On_Hours -O--CK 100 100 000 - 3359 |
|---|
| 71 | 12 Power_Cycle_Count -O--CK 100 100 000 - 72 |
|---|
| 72 | 170 Unknown_Attribute PO--CK 100 100 010 - 0 |
|---|
| 73 | 171 Unknown_Attribute -O--CK 100 100 000 - 0 |
|---|
| 74 | 172 Unknown_Attribute -O--CK 100 100 000 - 0 |
|---|
| 75 | 174 Unknown_Attribute -O--CK 100 100 000 - 67 |
|---|
| 76 | 175 Program_Fail_Count_Chip PO--CK 100 100 010 - 56465556136 |
|---|
| 77 | 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 |
|---|
| 78 | 184 End-to-End_Error PO--CK 100 100 090 - 0 |
|---|
| 79 | 187 Reported_Uncorrect -O--CK 100 100 000 - 0 |
|---|
| 80 | 190 Airflow_Temperature_Cel -O--CK 082 067 000 - 18 (Min/Max 5/33) |
|---|
| 81 | 192 Power-Off_Retract_Count -O--CK 100 100 000 - 67 |
|---|
| 82 | 194 Temperature_Celsius -O---K 100 100 000 - 27 |
|---|
| 83 | 197 Current_Pending_Sector -O--CK 100 100 000 - 0 |
|---|
| 84 | 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 |
|---|
| 85 | 225 Unknown_SSD_Attribute -O--CK 100 100 000 - 96430 |
|---|
| 86 | 226 Unknown_SSD_Attribute -O--CK 100 100 000 - 675 |
|---|
| 87 | 227 Unknown_SSD_Attribute -O--CK 100 100 000 - 59 |
|---|
| 88 | 228 Power-off_Retract_Count -O--CK 100 100 000 - 200935 |
|---|
| 89 | 232 Available_Reservd_Space PO--CK 100 100 010 - 0 |
|---|
| 90 | 233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 |
|---|
| 91 | 234 Unknown_Attribute -O--CK 100 100 000 - 0 |
|---|
| 92 | 241 Total_LBAs_Written -O--CK 100 100 000 - 96430 |
|---|
| 93 | 242 Total_LBAs_Read -O--CK 100 100 000 - 139056 |
|---|
| 94 | ||||||_ K auto-keep |
|---|
| 95 | |||||__ C event count |
|---|
| 96 | ||||___ R error rate |
|---|
| 97 | |||____ S speed/performance |
|---|
| 98 | ||_____ O updated online |
|---|
| 99 | |______ P prefailure warning |
|---|
| 100 | |
|---|
| 101 | ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: scsi error unsupported field in scsi command |
|---|
| 102 | Read GP Log Directory failed |
|---|
| 103 | |
|---|
| 104 | SMART Log Directory Version 1 [multi-sector log support] |
|---|
| 105 | Address Access R/W Size Description |
|---|
| 106 | 0x00 SL R/O 1 Log Directory |
|---|
| 107 | 0x01 SL R/O 1 Summary SMART error log |
|---|
| 108 | 0x02 SL R/O 8 Comprehensive SMART error log |
|---|
| 109 | 0x03 SL R/O 20 Ext. Comprehensive SMART error log |
|---|
| 110 | 0x04 SL R/O 8 Device Statistics log |
|---|
| 111 | 0x06 SL R/O 1 SMART self-test log |
|---|
| 112 | 0x07 SL R/O 2 Extended self-test log |
|---|
| 113 | 0x09 SL R/W 1 Selective self-test log |
|---|
| 114 | 0x10 SL R/O 1 NCQ Command Error log |
|---|
| 115 | 0x11 SL R/O 1 SATA Phy Event Counters log |
|---|
| 116 | 0x80-0x9f SL R/W 16 Host vendor specific log |
|---|
| 117 | 0xb0 SL VS 1 Device vendor specific log |
|---|
| 118 | 0xb1 SL VS 33 Device vendor specific log |
|---|
| 119 | 0xdd SL VS 1 Device vendor specific log |
|---|
| 120 | 0xdf SL VS 128 Device vendor specific log |
|---|
| 121 | 0xe0 SL R/W 1 SCT Command/Status |
|---|
| 122 | 0xe1 SL R/W 1 SCT Data Transfer |
|---|
| 123 | |
|---|
| 124 | SMART Extended Comprehensive Error Log (GP Log 0x03) not supported |
|---|
| 125 | |
|---|
| 126 | SMART Error Log Version: 1 |
|---|
| 127 | No Errors Logged |
|---|
| 128 | |
|---|
| 129 | SMART Extended Self-test Log (GP Log 0x07) not supported |
|---|
| 130 | |
|---|
| 131 | SMART Self-test log structure revision number 1 |
|---|
| 132 | No self-tests have been logged. [To run self-tests, use: smartctl -t] |
|---|
| 133 | |
|---|
| 134 | SMART Selective self-test log data structure revision number 1 |
|---|
| 135 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
|---|
| 136 | 1 0 0 Not_testing |
|---|
| 137 | 2 0 0 Not_testing |
|---|
| 138 | 3 0 0 Not_testing |
|---|
| 139 | 4 0 0 Not_testing |
|---|
| 140 | 5 0 0 Not_testing |
|---|
| 141 | Selective self-test flags (0x0): |
|---|
| 142 | After scanning selected spans, do NOT read-scan remainder of disk. |
|---|
| 143 | If Selective self-test is pending on power-up, resume after 0 minute delay. |
|---|
| 144 | |
|---|
| 145 | SCT Status Version: 3 |
|---|
| 146 | SCT Version (vendor specific): 1 (0x0001) |
|---|
| 147 | Device State: Active (0) |
|---|
| 148 | Current Temperature: 18 Celsius |
|---|
| 149 | Power Cycle Min/Max Temperature: 13/21 Celsius |
|---|
| 150 | Lifetime Min/Max Temperature: 5/33 Celsius |
|---|
| 151 | Specified Max Operating Temperature: 70 Celsius |
|---|
| 152 | Under/Over Temperature Limit Count: 0/0 |
|---|
| 153 | Vendor specific: |
|---|
| 154 | 00 00 23 00 00 00 00 00 00 00 00 00 00 00 00 00 |
|---|
| 155 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
|---|
| 156 | |
|---|
| 157 | Write SCT Data Table failed: scsi error unsupported field in scsi command |
|---|
| 158 | Read SCT Temperature History failed |
|---|
| 159 | |
|---|
| 160 | Write SCT (Get) Error Recovery Control Command failed: scsi error unsupported field in scsi command |
|---|
| 161 | SCT (Get) Error Recovery Control command failed |
|---|
| 162 | |
|---|
| 163 | Device Statistics (SMART Log 0x04) |
|---|
| 164 | Page Offset Size Value Flags Description |
|---|
| 165 | 0x01 ===== = = === == General Statistics (rev 2) == |
|---|
| 166 | 0x01 0x008 4 72 --- Lifetime Power-On Resets |
|---|
| 167 | 0x01 0x018 6 6319693579 --- Logical Sectors Written |
|---|
| 168 | 0x01 0x020 6 326764383 --- Number of Write Commands |
|---|
| 169 | 0x01 0x028 6 9113209294 --- Logical Sectors Read |
|---|
| 170 | 0x01 0x030 6 705337876 --- Number of Read Commands |
|---|
| 171 | 0x04 ===== = = === == General Errors Statistics (rev 1) == |
|---|
| 172 | 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors |
|---|
| 173 | 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion |
|---|
| 174 | 0x05 ===== = = === == Temperature Statistics (rev 1) == |
|---|
| 175 | 0x05 0x008 1 18 --- Current Temperature |
|---|
| 176 | 0x05 0x010 1 18 --- Average Short Term Temperature |
|---|
| 177 | 0x05 0x018 1 20 --- Average Long Term Temperature |
|---|
| 178 | 0x05 0x020 1 33 --- Highest Temperature |
|---|
| 179 | 0x05 0x028 1 11 --- Lowest Temperature |
|---|
| 180 | 0x05 0x030 1 23 --- Highest Average Short Term Temperature |
|---|
| 181 | 0x05 0x038 1 12 --- Lowest Average Short Term Temperature |
|---|
| 182 | 0x05 0x040 1 21 --- Highest Average Long Term Temperature |
|---|
| 183 | 0x05 0x048 1 15 --- Lowest Average Long Term Temperature |
|---|
| 184 | 0x05 0x050 4 0 --- Time in Over-Temperature |
|---|
| 185 | 0x05 0x058 1 70 --- Specified Maximum Operating Temperature |
|---|
| 186 | 0x05 0x060 4 0 --- Time in Under-Temperature |
|---|
| 187 | 0x05 0x068 1 0 --- Specified Minimum Operating Temperature |
|---|
| 188 | 0x06 ===== = = === == Transport Statistics (rev 1) == |
|---|
| 189 | 0x06 0x008 4 201 --- Number of Hardware Resets |
|---|
| 190 | 0x06 0x010 4 187 --- Number of ASR Events |
|---|
| 191 | 0x06 0x018 4 0 --- Number of Interface CRC Errors |
|---|
| 192 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) == |
|---|
| 193 | 0x07 0x008 1 0 --- Percentage Used Endurance Indicator |
|---|
| 194 | |||_ C monitored condition met |
|---|
| 195 | ||__ D supports DSN |
|---|
| 196 | |___ N normalized value |
|---|
| 197 | |
|---|
| 198 | Pending Defects log (GP Log 0x0c) not supported |
|---|
| 199 | |
|---|
| 200 | ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: scsi error unsupported field in scsi command |
|---|
| 201 | Read SATA Phy Event Counters failed |
|---|
| 202 | |
|---|
