1 | smartctl 5.41 2011-02-04 r3253 [i686-w64-mingw32-win7(64)-sp1] (cf-win32-20110204)
|
---|
2 | Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Model Family: Seagate Barracuda 7200.9 family
|
---|
6 | Device Model: ST3250824AS
|
---|
7 | Serial Number: 4ND1X24H
|
---|
8 | Firmware Version: 3.AAD
|
---|
9 | User Capacity: 250,059,350,016 bytes
|
---|
10 | Device is: In smartctl database [for details use: -P show]
|
---|
11 | ATA Version is: 7
|
---|
12 | ATA Standard is: Exact ATA specification draft version not indicated
|
---|
13 | Local Time is: Sat Apr 23 14:39:27 2011 GST
|
---|
14 | SMART support is: Available - device has SMART capability.
|
---|
15 | SMART support is: Enabled
|
---|
16 |
|
---|
17 | === START OF READ SMART DATA SECTION ===
|
---|
18 | SMART overall-health self-assessment test result: PASSED
|
---|
19 |
|
---|
20 | General SMART Values:
|
---|
21 | Offline data collection status: (0x82) Offline data collection activity
|
---|
22 | was completed without error.
|
---|
23 | Auto Offline Data Collection: Enabled.
|
---|
24 | Self-test execution status: ( 25) The self-test routine was aborted by
|
---|
25 | the host.
|
---|
26 | Total time to complete Offline
|
---|
27 | data collection: ( 430) seconds.
|
---|
28 | Offline data collection
|
---|
29 | capabilities: (0x5b) SMART execute Offline immediate.
|
---|
30 | Auto Offline data collection on/off support.
|
---|
31 | Suspend Offline collection upon new
|
---|
32 | command.
|
---|
33 | Offline surface scan supported.
|
---|
34 | Self-test supported.
|
---|
35 | No Conveyance Self-test supported.
|
---|
36 | Selective Self-test supported.
|
---|
37 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
38 | power-saving mode.
|
---|
39 | Supports SMART auto save timer.
|
---|
40 | Error logging capability: (0x01) Error logging supported.
|
---|
41 | General Purpose Logging supported.
|
---|
42 | Short self-test routine
|
---|
43 | recommended polling time: ( 1) minutes.
|
---|
44 | Extended self-test routine
|
---|
45 | recommended polling time: ( 100) minutes.
|
---|
46 |
|
---|
47 | SMART Attributes Data Structure revision number: 10
|
---|
48 | Vendor Specific SMART Attributes with Thresholds:
|
---|
49 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
---|
50 | 1 Raw_Read_Error_Rate 0x000f 114 093 006 Pre-fail Always - 79528687
|
---|
51 | 3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0
|
---|
52 | 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 539
|
---|
53 | 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
|
---|
54 | 7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 8735248097
|
---|
55 | 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 4324
|
---|
56 | 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
|
---|
57 | 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 634
|
---|
58 | 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
|
---|
59 | 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
|
---|
60 | 190 Airflow_Temperature_Cel 0x0022 062 049 045 Old_age Always - 38 (Min/Max 25/38)
|
---|
61 | 194 Temperature_Celsius 0x0022 038 051 000 Old_age Always - 38 (0 13 0 0)
|
---|
62 | 195 Hardware_ECC_Recovered 0x001a 058 052 000 Old_age Always - 162312488
|
---|
63 | 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
|
---|
64 | 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
|
---|
65 | 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
|
---|
66 | 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
|
---|
67 | 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
|
---|
68 |
|
---|
69 | ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: Function not implemented
|
---|
70 | Read GP Log Directory failed.
|
---|
71 |
|
---|
72 | SMART Log Directory Version 1 [multi-sector log support]
|
---|
73 | SMART Log at address 0x00 has 1 sectors [Log Directory]
|
---|
74 | SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
|
---|
75 | SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log]
|
---|
76 | SMART Log at address 0x03 has 5 sectors [Ext. Comprehensive SMART error log]
|
---|
77 | SMART Log at address 0x06 has 1 sectors [SMART self-test log]
|
---|
78 | SMART Log at address 0x07 has 1 sectors [Extended self-test log]
|
---|
79 | SMART Log at address 0x09 has 1 sectors [Selective self-test log]
|
---|
80 | SMART Log at address 0x10 has 1 sectors [NCQ Command Error]
|
---|
81 | SMART Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
|
---|
82 | SMART Log at address 0x20 has 1 sectors [Streaming performance log]
|
---|
83 | SMART Log at address 0x21 has 1 sectors [Write stream error log]
|
---|
84 | SMART Log at address 0x22 has 1 sectors [Read stream error log]
|
---|
85 | SMART Log at address 0x23 has 1 sectors [Delayed sector log]
|
---|
86 | SMART Log at address 0x80 has 16 sectors [Host vendor specific log]
|
---|
87 | SMART Log at address 0x81 has 16 sectors [Host vendor specific log]
|
---|
88 | SMART Log at address 0x82 has 16 sectors [Host vendor specific log]
|
---|
89 | SMART Log at address 0x83 has 16 sectors [Host vendor specific log]
|
---|
90 | SMART Log at address 0x84 has 16 sectors [Host vendor specific log]
|
---|
91 | SMART Log at address 0x85 has 16 sectors [Host vendor specific log]
|
---|
92 | SMART Log at address 0x86 has 16 sectors [Host vendor specific log]
|
---|
93 | SMART Log at address 0x87 has 16 sectors [Host vendor specific log]
|
---|
94 | SMART Log at address 0x88 has 16 sectors [Host vendor specific log]
|
---|
95 | SMART Log at address 0x89 has 16 sectors [Host vendor specific log]
|
---|
96 | SMART Log at address 0x8a has 16 sectors [Host vendor specific log]
|
---|
97 | SMART Log at address 0x8b has 16 sectors [Host vendor specific log]
|
---|
98 | SMART Log at address 0x8c has 16 sectors [Host vendor specific log]
|
---|
99 | SMART Log at address 0x8d has 16 sectors [Host vendor specific log]
|
---|
100 | SMART Log at address 0x8e has 16 sectors [Host vendor specific log]
|
---|
101 | SMART Log at address 0x8f has 16 sectors [Host vendor specific log]
|
---|
102 | SMART Log at address 0x90 has 16 sectors [Host vendor specific log]
|
---|
103 | SMART Log at address 0x91 has 16 sectors [Host vendor specific log]
|
---|
104 | SMART Log at address 0x92 has 16 sectors [Host vendor specific log]
|
---|
105 | SMART Log at address 0x93 has 16 sectors [Host vendor specific log]
|
---|
106 | SMART Log at address 0x94 has 16 sectors [Host vendor specific log]
|
---|
107 | SMART Log at address 0x95 has 16 sectors [Host vendor specific log]
|
---|
108 | SMART Log at address 0x96 has 16 sectors [Host vendor specific log]
|
---|
109 | SMART Log at address 0x97 has 16 sectors [Host vendor specific log]
|
---|
110 | SMART Log at address 0x98 has 16 sectors [Host vendor specific log]
|
---|
111 | SMART Log at address 0x99 has 16 sectors [Host vendor specific log]
|
---|
112 | SMART Log at address 0x9a has 16 sectors [Host vendor specific log]
|
---|
113 | SMART Log at address 0x9b has 16 sectors [Host vendor specific log]
|
---|
114 | SMART Log at address 0x9c has 16 sectors [Host vendor specific log]
|
---|
115 | SMART Log at address 0x9d has 16 sectors [Host vendor specific log]
|
---|
116 | SMART Log at address 0x9e has 16 sectors [Host vendor specific log]
|
---|
117 | SMART Log at address 0x9f has 16 sectors [Host vendor specific log]
|
---|
118 | SMART Log at address 0xa0 has 1 sectors [Device vendor specific log]
|
---|
119 | SMART Log at address 0xa1 has 20 sectors [Device vendor specific log]
|
---|
120 | SMART Log at address 0xa2 has 101 sectors [Device vendor specific log]
|
---|
121 | SMART Log at address 0xa8 has 20 sectors [Device vendor specific log]
|
---|
122 | SMART Log at address 0xa9 has 1 sectors [Device vendor specific log]
|
---|
123 | SMART Log at address 0xe0 has 1 sectors [SCT Command/Status]
|
---|
124 | SMART Log at address 0xe1 has 1 sectors [SCT Data Transfer]
|
---|
125 |
|
---|
126 | SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
---|
127 | SMART Error Log Version: 1
|
---|
128 | No Errors Logged
|
---|
129 |
|
---|
130 | SMART Extended Self-test Log (GP Log 0x07) not supported
|
---|
131 | SMART Self-test log structure revision number 1
|
---|
132 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
---|
133 | # 1 Short offline Aborted by host 90% 4324 -
|
---|
134 | # 2 Short offline Aborted by host 90% 4324 -
|
---|
135 | # 3 Short offline Aborted by host 90% 4324 -
|
---|
136 | # 4 Short offline Completed without error 00% 4292 -
|
---|
137 | # 5 Short offline Completed without error 00% 4290 -
|
---|
138 | # 6 Short offline Completed without error 00% 491 -
|
---|
139 | # 7 Short offline Completed without error 00% 144 -
|
---|
140 | # 8 Short offline Aborted by host 80% 144 -
|
---|
141 | # 9 Extended offline Completed without error 00% 144 -
|
---|
142 | #10 Extended offline Completed without error 00% 142 -
|
---|
143 | #11 Extended offline Aborted by host 90% 141 -
|
---|
144 |
|
---|
145 | SMART Selective self-test log data structure revision number 1
|
---|
146 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
147 | 1 0 0 Not_testing
|
---|
148 | 2 0 0 Not_testing
|
---|
149 | 3 0 0 Not_testing
|
---|
150 | 4 0 0 Not_testing
|
---|
151 | 5 0 0 Not_testing
|
---|
152 | Selective self-test flags (0x0):
|
---|
153 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
154 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
155 |
|
---|
156 | Warning: device does not support SCT Commands
|
---|
157 | SATA Phy Event Counters (GP Log 0x11) not supported
|
---|