| 1 | smartctl 5.41 2011-02-04 r3253 [i686-w64-mingw32-win7(64)-sp1] (cf-win32-20110204)
|
|---|
| 2 | Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Model Family: Seagate Barracuda 7200.9 family
|
|---|
| 6 | Device Model: ST3250824AS
|
|---|
| 7 | Serial Number: 4ND1X24H
|
|---|
| 8 | Firmware Version: 3.AAD
|
|---|
| 9 | User Capacity: 250,059,350,016 bytes
|
|---|
| 10 | Device is: In smartctl database [for details use: -P show]
|
|---|
| 11 | ATA Version is: 7
|
|---|
| 12 | ATA Standard is: Exact ATA specification draft version not indicated
|
|---|
| 13 | Local Time is: Sat Apr 23 14:40:16 2011 GST
|
|---|
| 14 | SMART support is: Available - device has SMART capability.
|
|---|
| 15 | Enabled status cached by OS, trying SMART RETURN STATUS cmd.
|
|---|
| 16 | SMART support is: Enabled
|
|---|
| 17 |
|
|---|
| 18 | === START OF READ SMART DATA SECTION ===
|
|---|
| 19 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 20 |
|
|---|
| 21 | General SMART Values:
|
|---|
| 22 | Offline data collection status: (0x82) Offline data collection activity
|
|---|
| 23 | was completed without error.
|
|---|
| 24 | Auto Offline Data Collection: Enabled.
|
|---|
| 25 | Self-test execution status: ( 25) The self-test routine was aborted by
|
|---|
| 26 | the host.
|
|---|
| 27 | Total time to complete Offline
|
|---|
| 28 | data collection: ( 430) seconds.
|
|---|
| 29 | Offline data collection
|
|---|
| 30 | capabilities: (0x5b) SMART execute Offline immediate.
|
|---|
| 31 | Auto Offline data collection on/off support.
|
|---|
| 32 | Suspend Offline collection upon new
|
|---|
| 33 | command.
|
|---|
| 34 | Offline surface scan supported.
|
|---|
| 35 | Self-test supported.
|
|---|
| 36 | No Conveyance Self-test supported.
|
|---|
| 37 | Selective Self-test supported.
|
|---|
| 38 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 39 | power-saving mode.
|
|---|
| 40 | Supports SMART auto save timer.
|
|---|
| 41 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 42 | General Purpose Logging supported.
|
|---|
| 43 | Short self-test routine
|
|---|
| 44 | recommended polling time: ( 1) minutes.
|
|---|
| 45 | Extended self-test routine
|
|---|
| 46 | recommended polling time: ( 100) minutes.
|
|---|
| 47 |
|
|---|
| 48 | SMART Attributes Data Structure revision number: 10
|
|---|
| 49 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 50 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|---|
| 51 | 1 Raw_Read_Error_Rate 0x000f 114 093 006 Pre-fail Always - 79528687
|
|---|
| 52 | 3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0
|
|---|
| 53 | 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 539
|
|---|
| 54 | 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
|
|---|
| 55 | 7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 8735253070
|
|---|
| 56 | 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 4324
|
|---|
| 57 | 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
|
|---|
| 58 | 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 634
|
|---|
| 59 | 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 60 | 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
|
|---|
| 61 | 190 Airflow_Temperature_Cel 0x0022 062 049 045 Old_age Always - 38 (Min/Max 25/38)
|
|---|
| 62 | 194 Temperature_Celsius 0x0022 038 051 000 Old_age Always - 38 (0 13 0 0)
|
|---|
| 63 | 195 Hardware_ECC_Recovered 0x001a 058 052 000 Old_age Always - 167186800
|
|---|
| 64 | 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
|
|---|
| 65 | 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
|
|---|
| 66 | 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
|
|---|
| 67 | 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
|
|---|
| 68 | 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
|
|---|
| 69 |
|
|---|
| 70 | SMART Error Log not supported
|
|---|
| 71 | SMART Self-test Log not supported
|
|---|
| 72 | Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
|---|
| 73 | Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
|
|---|
| 74 | SMART Selective self-test log data structure revision number 0
|
|---|
| 75 | Note: revision number not 1 implies that no selective self-test has ever been run
|
|---|
| 76 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 77 | 1 0 281474976710656 Not_testing
|
|---|
| 78 | 2 0 0 Not_testing
|
|---|
| 79 | 3 0 0 Not_testing
|
|---|
| 80 | 4 0 0 Not_testing
|
|---|
| 81 | 5 0 0 Not_testing
|
|---|
| 82 | Selective self-test flags (0x0):
|
|---|
| 83 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 84 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 85 |
|
|---|
