1 | smartctl pre-7.4 (build date Sep 1 2022) [x86_64-linux-5.11.0] (local build) |
---|
2 | Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org |
---|
3 | |
---|
4 | === START OF INFORMATION SECTION === |
---|
5 | Device Model: WUH722222ALE604 |
---|
6 | Serial Number: 2TG0L99G |
---|
7 | LU WWN Device Id: 5 000cca 2c8c044b2 |
---|
8 | Add. Product Id: 202221 |
---|
9 | Firmware Version: LNGAW720 |
---|
10 | User Capacity: 22,000,969,973,760 bytes [22.0 TB] |
---|
11 | Sector Sizes: 512 bytes logical, 4096 bytes physical |
---|
12 | Rotation Rate: 7200 rpm |
---|
13 | Form Factor: 3.5 inches |
---|
14 | Device is: Not in smartctl database |
---|
15 | ATA Version is: ACS-5 (minor revision not indicated) |
---|
16 | SATA Version is: SATA 3.5, 6.0 Gb/s (current: 6.0 Gb/s) |
---|
17 | Local Time is: Fri Sep 16 23:11:45 2022 CST |
---|
18 | SMART support is: Available - device has SMART capability. |
---|
19 | SMART support is: Enabled |
---|
20 | AAM feature is: Unavailable |
---|
21 | APM feature is: Disabled |
---|
22 | Rd look-ahead is: Enabled |
---|
23 | Write cache is: Enabled |
---|
24 | DSN feature is: Unavailable |
---|
25 | ATA Security is: Disabled, NOT FROZEN [SEC1] |
---|
26 | Wt Cache Reorder: Enabled |
---|
27 | |
---|
28 | === START OF READ SMART DATA SECTION === |
---|
29 | SMART overall-health self-assessment test result: PASSED |
---|
30 | |
---|
31 | General SMART Values: |
---|
32 | Offline data collection status: (0x80) Offline data collection activity |
---|
33 | was never started. |
---|
34 | Auto Offline Data Collection: Enabled. |
---|
35 | Self-test execution status: ( 0) The previous self-test routine completed |
---|
36 | without error or no self-test has ever |
---|
37 | been run. |
---|
38 | Total time to complete Offline |
---|
39 | data collection: ( 101) seconds. |
---|
40 | Offline data collection |
---|
41 | capabilities: (0x5b) SMART execute Offline immediate. |
---|
42 | Auto Offline data collection on/off support. |
---|
43 | Suspend Offline collection upon new |
---|
44 | command. |
---|
45 | Offline surface scan supported. |
---|
46 | Self-test supported. |
---|
47 | No Conveyance Self-test supported. |
---|
48 | Selective Self-test supported. |
---|
49 | SMART capabilities: (0x0003) Saves SMART data before entering |
---|
50 | power-saving mode. |
---|
51 | Supports SMART auto save timer. |
---|
52 | Error logging capability: (0x01) Error logging supported. |
---|
53 | General Purpose Logging supported. |
---|
54 | Short self-test routine |
---|
55 | recommended polling time: ( 2) minutes. |
---|
56 | Extended self-test routine |
---|
57 | recommended polling time: (2588) minutes. |
---|
58 | SCT capabilities: (0x003d) SCT Status supported. |
---|
59 | SCT Error Recovery Control supported. |
---|
60 | SCT Feature Control supported. |
---|
61 | SCT Data Table supported. |
---|
62 | |
---|
63 | SMART Attributes Data Structure revision number: 16 |
---|
64 | Vendor Specific SMART Attributes with Thresholds: |
---|
65 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE |
---|
66 | 1 Raw_Read_Error_Rate PO-R-- 100 100 001 - 0 |
---|
67 | 2 Throughput_Performance P-S--- 100 100 054 - 0 |
---|
68 | 3 Spin_Up_Time POS--- 094 094 001 - 288 |
---|
69 | 4 Start_Stop_Count -O--C- 100 100 000 - 3 |
---|
70 | 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 |
---|
71 | 7 Seek_Error_Rate PO-R-- 100 100 001 - 0 |
---|
72 | 8 Seek_Time_Performance P-S--- 100 100 020 - 0 |
---|
73 | 9 Power_On_Hours -O--C- 100 100 000 - 687 |
---|
74 | 10 Spin_Retry_Count PO--C- 100 100 001 - 0 |
---|
75 | 12 Power_Cycle_Count -O--CK 100 100 000 - 3 |
---|
76 | 22 Unknown_Attribute PO---K 100 100 025 - 6553700 |
---|
77 | 71 Unknown_Attribute P----- 100 100 001 - 0 |
---|
78 | 82 Unknown_Attribute -O---K 100 100 000 - 16711935 |
---|
79 | 90 Unknown_Attribute P---CK 100 100 001 - 506806140928 |
---|
80 | 184 End-to-End_Error PO--CK 100 100 097 - 0 |
---|
81 | 188 Command_Timeout -O--CK 100 100 000 - 0 |
---|
82 | 192 Power-Off_Retract_Count -O--CK 100 100 000 - 17 |
---|
83 | 193 Load_Cycle_Count -O--C- 100 100 000 - 17 |
---|
84 | 194 Temperature_Celsius -O---- 056 056 000 - 39 (Min/Max 25/45) |
---|
85 | 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 |
---|
86 | 197 Current_Pending_Sector -O---K 100 100 000 - 0 |
---|
87 | 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 |
---|
88 | 199 UDMA_CRC_Error_Count -O-R-- 100 100 000 - 0 |
---|
89 | 241 Total_LBAs_Written -O--C- 100 100 000 - 0 |
---|
90 | 242 Total_LBAs_Read -O--C- 100 100 000 - 72344 |
---|
91 | ||||||_ K auto-keep |
---|
92 | |||||__ C event count |
---|
93 | ||||___ R error rate |
---|
94 | |||____ S speed/performance |
---|
95 | ||_____ O updated online |
---|
96 | |______ P prefailure warning |
---|
97 | |
---|
98 | General Purpose Log Directory Version 1 |
---|
99 | SMART Log Directory Version 1 [multi-sector log support] |
---|
100 | Address Access R/W Size Description |
---|
101 | 0x00 GPL,SL R/O 1 Log Directory |
---|
102 | 0x01 SL R/O 1 Summary SMART error log |
---|
103 | 0x02 SL R/O 1 Comprehensive SMART error log |
---|
104 | 0x03 GPL R/O 1 Ext. Comprehensive SMART error log |
---|
105 | 0x04 GPL R/O 256 Device Statistics log |
---|
106 | 0x04 SL R/O 255 Device Statistics log |
---|
107 | 0x06 SL R/O 1 SMART self-test log |
---|
108 | 0x07 GPL R/O 1 Extended self-test log |
---|
109 | 0x08 GPL R/O 2 Power Conditions log |
---|
110 | 0x09 SL R/W 1 Selective self-test log |
---|
111 | 0x0c GPL R/O 19043 Pending Defects log |
---|
112 | 0x10 GPL R/O 1 NCQ Command Error log |
---|
113 | 0x11 GPL R/O 1 SATA Phy Event Counters log |
---|
114 | 0x12 GPL R/O 1 SATA NCQ Non-Data log |
---|
115 | 0x13 GPL R/O 1 SATA NCQ Send and Receive log |
---|
116 | 0x15 GPL R/W 1 Rebuild Assist log |
---|
117 | 0x21 GPL R/O 1 Write stream error log |
---|
118 | 0x22 GPL R/O 1 Read stream error log |
---|
119 | 0x24 GPL R/O 256 Current Device Internal Status Data log |
---|
120 | 0x25 GPL R/O 256 Saved Device Internal Status Data log |
---|
121 | 0x2f GPL - 1 Set Sector Configuration |
---|
122 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log |
---|
123 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log |
---|
124 | 0xa6 GPL VS 1 Device vendor specific log |
---|
125 | 0xb2 GPL VS 2381 Device vendor specific log |
---|
126 | 0xb2 SL VS 255 Device vendor specific log |
---|
127 | 0xb4 GPL,SL VS 1 Device vendor specific log |
---|
128 | 0xb7 SL VS 1 Device vendor specific log |
---|
129 | 0xb8 GPL,SL VS 1 Device vendor specific log |
---|
130 | 0xb9 SL VS 1 Device vendor specific log |
---|
131 | 0xcd GPL,SL VS 1 Device vendor specific log |
---|
132 | 0xd8-0xd9 GPL,SL VS 1 Device vendor specific log |
---|
133 | 0xe0 GPL,SL R/W 1 SCT Command/Status |
---|
134 | 0xe1 GPL,SL R/W 1 SCT Data Transfer |
---|
135 | |
---|
136 | SMART Extended Comprehensive Error Log Version: 1 (1 sectors) |
---|
137 | No Errors Logged |
---|
138 | |
---|
139 | SMART Extended Self-test Log Version: 1 (1 sectors) |
---|
140 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error |
---|
141 | # 1 Short offline Completed without error 00% 687 - |
---|
142 | |
---|
143 | SMART Selective self-test log data structure revision number 1 |
---|
144 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
---|
145 | 1 0 0 Not_testing |
---|
146 | 2 0 0 Not_testing |
---|
147 | 3 0 0 Not_testing |
---|
148 | 4 0 0 Not_testing |
---|
149 | 5 0 0 Not_testing |
---|
150 | Selective self-test flags (0x0): |
---|
151 | After scanning selected spans, do NOT read-scan remainder of disk. |
---|
152 | If Selective self-test is pending on power-up, resume after 0 minute delay. |
---|
153 | |
---|
154 | SCT Status Version: 3 |
---|
155 | SCT Version (vendor specific): 256 (0x0100) |
---|
156 | Device State: Active (0) |
---|
157 | Current Temperature: 39 Celsius |
---|
158 | Power Cycle Min/Max Temperature: 25/39 Celsius |
---|
159 | Lifetime Min/Max Temperature: 25/45 Celsius |
---|
160 | Under/Over Temperature Limit Count: 0/0 |
---|
161 | SMART Status: 0xc24f (PASSED) |
---|
162 | Minimum supported ERC Time Limit: 65 (6.5 seconds) |
---|
163 | |
---|
164 | SCT Temperature History Version: 2 |
---|
165 | Temperature Sampling Period: 1 minute |
---|
166 | Temperature Logging Interval: 1 minute |
---|
167 | Min/Max recommended Temperature: 0/60 Celsius |
---|
168 | Min/Max Temperature Limit: -40/70 Celsius |
---|
169 | Temperature History Size (Index): 128 (64) |
---|
170 | |
---|
171 | Index Estimated Time Temperature Celsius |
---|
172 | 65 2022-09-16 21:04 37 ****************** |
---|
173 | ... ..(110 skipped). .. ****************** |
---|
174 | 48 2022-09-16 22:55 37 ****************** |
---|
175 | 49 2022-09-16 22:56 38 ******************* |
---|
176 | ... ..( 2 skipped). .. ******************* |
---|
177 | 52 2022-09-16 22:59 38 ******************* |
---|
178 | 53 2022-09-16 23:00 39 ******************** |
---|
179 | ... ..( 9 skipped). .. ******************** |
---|
180 | 63 2022-09-16 23:10 39 ******************** |
---|
181 | 64 2022-09-16 23:11 37 ****************** |
---|
182 | |
---|
183 | SCT Error Recovery Control: |
---|
184 | Read: Disabled |
---|
185 | Write: Disabled |
---|
186 | |
---|
187 | Device Statistics (GP Log 0x04) |
---|
188 | Page Offset Size Value Flags Description |
---|
189 | 0x01 ===== = = === == General Statistics (rev 1) == |
---|
190 | 0x01 0x008 4 3 --- Lifetime Power-On Resets |
---|
191 | 0x01 0x010 4 687 --- Power-on Hours |
---|
192 | 0x01 0x018 6 0 --- Logical Sectors Written |
---|
193 | 0x01 0x020 6 0 --- Number of Write Commands |
---|
194 | 0x01 0x028 6 72344 --- Logical Sectors Read |
---|
195 | 0x01 0x030 6 151 --- Number of Read Commands |
---|
196 | 0x01 0x038 6 2474755500 --- Date and Time TimeStamp |
---|
197 | 0x03 ===== = = === == Rotating Media Statistics (rev 1) == |
---|
198 | 0x03 0x008 4 3 --- Spindle Motor Power-on Hours |
---|
199 | 0x03 0x010 4 3 --- Head Flying Hours |
---|
200 | 0x03 0x018 4 17 --- Head Load Events |
---|
201 | 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors |
---|
202 | 0x03 0x028 4 0 --- Read Recovery Attempts |
---|
203 | 0x03 0x030 4 22 --- Number of Mechanical Start Failures |
---|
204 | 0x04 ===== = = === == General Errors Statistics (rev 1) == |
---|
205 | 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors |
---|
206 | 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion |
---|
207 | 0x04 0x018 4 0 --- Physical Element Status Changed |
---|
208 | 0x05 ===== = = === == Temperature Statistics (rev 1) == |
---|
209 | 0x05 0x008 1 39 --- Current Temperature |
---|
210 | 0x05 0x010 1 35 N-- Average Short Term Temperature |
---|
211 | 0x05 0x018 1 - N-- Average Long Term Temperature |
---|
212 | 0x05 0x020 1 45 --- Highest Temperature |
---|
213 | 0x05 0x028 1 25 --- Lowest Temperature |
---|
214 | 0x05 0x030 1 40 N-- Highest Average Short Term Temperature |
---|
215 | 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature |
---|
216 | 0x05 0x040 1 - N-- Highest Average Long Term Temperature |
---|
217 | 0x05 0x048 1 - N-- Lowest Average Long Term Temperature |
---|
218 | 0x05 0x050 4 0 --- Time in Over-Temperature |
---|
219 | 0x05 0x058 1 60 --- Specified Maximum Operating Temperature |
---|
220 | 0x05 0x060 4 0 --- Time in Under-Temperature |
---|
221 | 0x05 0x068 1 0 --- Specified Minimum Operating Temperature |
---|
222 | 0x06 ===== = = === == Transport Statistics (rev 1) == |
---|
223 | 0x06 0x008 4 1 --- Number of Hardware Resets |
---|
224 | 0x06 0x010 4 0 --- Number of ASR Events |
---|
225 | 0x06 0x018 4 0 --- Number of Interface CRC Errors |
---|
226 | 0xff ===== = = === == Vendor Specific Statistics (rev 1) == |
---|
227 | |||_ C monitored condition met |
---|
228 | ||__ D supports DSN |
---|
229 | |___ N normalized value |
---|
230 | |
---|
231 | Pending Defects log (GP Log 0x0c) |
---|
232 | No Defects Logged |
---|
233 | |
---|
234 | SATA Phy Event Counters (GP Log 0x11) |
---|
235 | ID Size Value Description |
---|
236 | 0x0001 2 0 Command failed due to ICRC error |
---|
237 | 0x0002 2 0 R_ERR response for data FIS |
---|
238 | 0x0003 2 0 R_ERR response for device-to-host data FIS |
---|
239 | 0x0004 2 0 R_ERR response for host-to-device data FIS |
---|
240 | 0x0005 2 0 R_ERR response for non-data FIS |
---|
241 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS |
---|
242 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS |
---|
243 | 0x0008 2 0 Device-to-host non-data FIS retries |
---|
244 | 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy |
---|
245 | 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET |
---|
246 | 0x000b 2 0 CRC errors within host-to-device FIS |
---|
247 | 0x000d 2 0 Non-CRC errors within host-to-device FIS |
---|
248 | |
---|