1 | # ./smartctl -a /dev/sda |
---|
2 | smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.15.55-mod-std] (local build) |
---|
3 | Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org |
---|
4 | |
---|
5 | === START OF INFORMATION SECTION === |
---|
6 | Device Model: KINGSTON SKC600MS256G |
---|
7 | Serial Number: 50026B77840F1B4D |
---|
8 | LU WWN Device Id: 5 0026b7 7840f1b4d |
---|
9 | Firmware Version: S4500107 |
---|
10 | User Capacity: 256,060,514,304 bytes [256 GB] |
---|
11 | Sector Sizes: 512 bytes logical, 4096 bytes physical |
---|
12 | Rotation Rate: Solid State Device |
---|
13 | Form Factor: 2.5 inches |
---|
14 | TRIM Command: Available, deterministic, zeroed |
---|
15 | Device is: Not in smartctl database 7.3/5319 |
---|
16 | ATA Version is: ACS-3 T13/2161-D revision 5 |
---|
17 | SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) |
---|
18 | Local Time is: Tue Aug 9 11:53:05 2022 CEST |
---|
19 | SMART support is: Available - device has SMART capability. |
---|
20 | SMART support is: Enabled |
---|
21 | |
---|
22 | === START OF READ SMART DATA SECTION === |
---|
23 | SMART overall-health self-assessment test result: PASSED |
---|
24 | |
---|
25 | General SMART Values: |
---|
26 | Offline data collection status: (0x82) Offline data collection activity |
---|
27 | was completed without error. |
---|
28 | Auto Offline Data Collection: Enabled. |
---|
29 | Self-test execution status: ( 0) The previous self-test routine completed |
---|
30 | without error or no self-test has ever |
---|
31 | been run. |
---|
32 | Total time to complete Offline |
---|
33 | data collection: ( 0) seconds. |
---|
34 | Offline data collection |
---|
35 | capabilities: (0x7b) SMART execute Offline immediate. |
---|
36 | Auto Offline data collection on/off support. |
---|
37 | Suspend Offline collection upon new |
---|
38 | command. |
---|
39 | Offline surface scan supported. |
---|
40 | Self-test supported. |
---|
41 | Conveyance Self-test supported. |
---|
42 | Selective Self-test supported. |
---|
43 | SMART capabilities: (0x0002) Does not save SMART data before |
---|
44 | entering power-saving mode. |
---|
45 | Supports SMART auto save timer. |
---|
46 | Error logging capability: (0x01) Error logging supported. |
---|
47 | General Purpose Logging supported. |
---|
48 | Short self-test routine |
---|
49 | recommended polling time: ( 2) minutes. |
---|
50 | Extended self-test routine |
---|
51 | recommended polling time: ( 30) minutes. |
---|
52 | Conveyance self-test routine |
---|
53 | recommended polling time: ( 2) minutes. |
---|
54 | SCT capabilities: (0x0031) SCT Status supported. |
---|
55 | SCT Feature Control supported. |
---|
56 | SCT Data Table supported. |
---|
57 | |
---|
58 | SMART Attributes Data Structure revision number: 16 |
---|
59 | Vendor Specific SMART Attributes with Thresholds: |
---|
60 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE |
---|
61 | 1 Raw_Read_Error_Rate 0x0000 100 100 000 Old_age Offline - 0 |
---|
62 | 5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 0 |
---|
63 | 9 Power_On_Hours 0x0000 100 100 000 Old_age Offline - 303 |
---|
64 | 12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 117 |
---|
65 | 148 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 4 |
---|
66 | 149 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 1 |
---|
67 | 150 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 |
---|
68 | 151 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 |
---|
69 | 159 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 |
---|
70 | 160 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 |
---|
71 | 161 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 15 |
---|
72 | 164 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 26 |
---|
73 | 165 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 2 |
---|
74 | 166 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 |
---|
75 | 167 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 |
---|
76 | 169 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 100 |
---|
77 | 177 Wear_Leveling_Count 0x0000 100 100 050 Old_age Offline - 0 |
---|
78 | 181 Program_Fail_Cnt_Total 0x0000 100 100 000 Old_age Offline - 0 |
---|
79 | 182 Erase_Fail_Count_Total 0x0000 100 100 000 Old_age Offline - 0 |
---|
80 | 192 Power-Off_Retract_Count 0x0000 100 100 000 Old_age Offline - 40 |
---|
81 | 194 Temperature_Celsius 0x0000 029 039 000 Old_age Offline - 29 |
---|
82 | 195 Hardware_ECC_Recovered 0x0000 100 100 000 Old_age Offline - 0 |
---|
83 | 196 Reallocated_Event_Count 0x0000 100 100 016 Old_age Offline - 0 |
---|
84 | 199 UDMA_CRC_Error_Count 0x0000 100 100 050 Old_age Offline - 0 |
---|
85 | 231 Unknown_SSD_Attribute 0x0000 100 100 000 Old_age Offline - 100 |
---|
86 | 232 Available_Reservd_Space 0x0000 100 100 000 Old_age Offline - 100 |
---|
87 | 241 Total_LBAs_Written 0x0000 100 100 000 Old_age Offline - 284 |
---|
88 | 242 Total_LBAs_Read 0x0000 100 100 000 Old_age Offline - 1401 |
---|
89 | 245 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 1053 |
---|
90 | |
---|
91 | SMART Error Log Version: 1 |
---|
92 | Invalid Error Log index = 0x0a (T13/1321D rev 1c Section 8.41.6.8.2.2 gives valid range from 1 to 5) |
---|
93 | |
---|
94 | SMART Self-test log structure revision number 1 |
---|
95 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error |
---|
96 | # 1 Short offline Completed without error 00% 302 - |
---|
97 | # 2 Short offline Completed without error 00% 301 - |
---|
98 | # 3 Short offline Completed without error 00% 298 - |
---|
99 | # 4 Short offline Completed without error 00% 295 - |
---|
100 | # 5 Short offline Completed without error 00% 292 - |
---|
101 | # 6 Short offline Completed without error 00% 291 - |
---|
102 | # 7 Short offline Completed without error 00% 46 - |
---|
103 | # 8 Short offline Completed without error 00% 46 - |
---|
104 | # 9 Short offline Completed without error 00% 46 - |
---|
105 | |
---|
106 | SMART Selective self-test log data structure revision number 1 |
---|
107 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
---|
108 | 1 0 0 Not_testing |
---|
109 | 2 0 0 Not_testing |
---|
110 | 3 0 0 Not_testing |
---|
111 | 4 0 0 Not_testing |
---|
112 | 5 0 0 Not_testing |
---|
113 | Selective self-test flags (0x0): |
---|
114 | After scanning selected spans, do NOT read-scan remainder of disk. |
---|
115 | If Selective self-test is pending on power-up, resume after 0 minute delay. |
---|
116 | |
---|