| 1 | smartctl 6.5 2016-05-07 r4318 [aarch64-linux-4.19.152-al-linux-v10.2.0-v1.12.22.4309-4105ace] (local build)
|
|---|
| 2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: WDC WD10PURZ-85U8XY0
|
|---|
| 6 | Firmware Version: 01.01A01
|
|---|
| 7 | User Capacity: 1,000,204,886,016 bytes [1.00 TB]
|
|---|
| 8 | Sector Sizes: 512 bytes logical, 4096 bytes physical
|
|---|
| 9 | Rotation Rate: 5400 rpm
|
|---|
| 10 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 11 | ATA Version is: ACS-2 (minor revision not indicated)
|
|---|
| 12 | SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
|
|---|
| 13 | Local Time is: Sun Jul 10 13:16:02 2022 CEST
|
|---|
| 14 | SMART support is: Available - device has SMART capability.
|
|---|
| 15 | SMART support is: Enabled
|
|---|
| 16 | AAM feature is: Unavailable
|
|---|
| 17 | APM feature is: Unavailable
|
|---|
| 18 | Rd look-ahead is: Enabled
|
|---|
| 19 | Write cache is: Enabled
|
|---|
| 20 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|---|
| 21 | Wt Cache Reorder: Enabled
|
|---|
| 22 |
|
|---|
| 23 | === START OF READ SMART DATA SECTION ===
|
|---|
| 24 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 25 |
|
|---|
| 26 | General SMART Values:
|
|---|
| 27 | Offline data collection status: (0x00) Offline data collection activity
|
|---|
| 28 | was never started.
|
|---|
| 29 | Auto Offline Data Collection: Disabled.
|
|---|
| 30 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 31 | without error or no self-test has ever
|
|---|
| 32 | been run.
|
|---|
| 33 | Total time to complete Offline
|
|---|
| 34 | data collection: (13020) seconds.
|
|---|
| 35 | Offline data collection
|
|---|
| 36 | capabilities: (0x7b) SMART execute Offline immediate.
|
|---|
| 37 | Auto Offline data collection on/off support.
|
|---|
| 38 | Suspend Offline collection upon new
|
|---|
| 39 | command.
|
|---|
| 40 | Offline surface scan supported.
|
|---|
| 41 | Self-test supported.
|
|---|
| 42 | Conveyance Self-test supported.
|
|---|
| 43 | Selective Self-test supported.
|
|---|
| 44 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 45 | power-saving mode.
|
|---|
| 46 | Supports SMART auto save timer.
|
|---|
| 47 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 48 | General Purpose Logging supported.
|
|---|
| 49 | Short self-test routine
|
|---|
| 50 | recommended polling time: ( 2) minutes.
|
|---|
| 51 | Extended self-test routine
|
|---|
| 52 | recommended polling time: ( 148) minutes.
|
|---|
| 53 | Conveyance self-test routine
|
|---|
| 54 | recommended polling time: ( 5) minutes.
|
|---|
| 55 | SCT capabilities: (0x303d) SCT Status supported.
|
|---|
| 56 | SCT Error Recovery Control supported.
|
|---|
| 57 | SCT Feature Control supported.
|
|---|
| 58 | SCT Data Table supported.
|
|---|
| 59 |
|
|---|
| 60 | SMART Attributes Data Structure revision number: 16
|
|---|
| 61 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 62 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 63 | 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
|
|---|
| 64 | 3 Spin_Up_Time POS--K 100 253 021 - 0
|
|---|
| 65 | 4 Start_Stop_Count -O--CK 100 100 000 - 2
|
|---|
| 66 | 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
|
|---|
| 67 | 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
|
|---|
| 68 | 9 Power_On_Hours -O--CK 097 097 000 - 2446
|
|---|
| 69 | 10 Spin_Retry_Count -O--CK 100 253 000 - 0
|
|---|
| 70 | 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
|
|---|
| 71 | 12 Power_Cycle_Count -O--CK 100 100 000 - 2
|
|---|
| 72 | 192 Power-Off_Retract_Count -O--CK 200 200 000 - 0
|
|---|
| 73 | 193 Load_Cycle_Count -O--CK 200 200 000 - 1
|
|---|
| 74 | 194 Temperature_Celsius -O---K 106 103 000 - 37
|
|---|
| 75 | 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
|
|---|
| 76 | 197 Current_Pending_Sector -O--CK 200 200 000 - 0
|
|---|
| 77 | 198 Offline_Uncorrectable ----CK 100 253 000 - 0
|
|---|
| 78 | 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
|
|---|
| 79 | 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
|
|---|
| 80 | ||||||_ K auto-keep
|
|---|
| 81 | |||||__ C event count
|
|---|
| 82 | ||||___ R error rate
|
|---|
| 83 | |||____ S speed/performance
|
|---|
| 84 | ||_____ O updated online
|
|---|
| 85 | |______ P prefailure warning
|
|---|
| 86 |
|
|---|
| 87 | General Purpose Log Directory Version 1
|
|---|
| 88 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 89 | Address Access R/W Size Description
|
|---|
| 90 | 0x00 GPL,SL R/O 1 Log Directory
|
|---|
| 91 | 0x01 SL R/O 1 Summary SMART error log
|
|---|
| 92 | 0x02 SL R/O 5 Comprehensive SMART error log
|
|---|
| 93 | 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
|
|---|
| 94 | 0x04 GPL,SL R/O 8 Device Statistics log
|
|---|
| 95 | 0x06 SL R/O 1 SMART self-test log
|
|---|
| 96 | 0x07 GPL R/O 1 Extended self-test log
|
|---|
| 97 | 0x09 SL R/W 1 Selective self-test log
|
|---|
| 98 | 0x10 GPL R/O 1 SATA NCQ Queued Error log
|
|---|
| 99 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
|---|
| 100 | 0x21 GPL R/O 1 Write stream error log
|
|---|
| 101 | 0x22 GPL R/O 1 Read stream error log
|
|---|
| 102 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|---|
| 103 | 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
|
|---|
| 104 | 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
|
|---|
| 105 | 0xbd GPL,SL VS 1 Device vendor specific log
|
|---|
| 106 | 0xc0 GPL,SL VS 1 Device vendor specific log
|
|---|
| 107 | 0xc1 GPL VS 93 Device vendor specific log
|
|---|
| 108 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
|---|
| 109 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|---|
| 110 |
|
|---|
| 111 | SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
|
|---|
| 112 | No Errors Logged
|
|---|
| 113 |
|
|---|
| 114 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
|---|
| 115 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 116 | # 1 Short offline Completed without error 00% 2446 -
|
|---|
| 117 |
|
|---|
| 118 | SMART Selective self-test log data structure revision number 1
|
|---|
| 119 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 120 | 1 0 0 Not_testing
|
|---|
| 121 | 2 0 0 Not_testing
|
|---|
| 122 | 3 0 0 Not_testing
|
|---|
| 123 | 4 0 0 Not_testing
|
|---|
| 124 | 5 0 0 Not_testing
|
|---|
| 125 | Selective self-test flags (0x0):
|
|---|
| 126 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 127 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 128 |
|
|---|
| 129 | SCT Status Version: 3
|
|---|
| 130 | SCT Version (vendor specific): 258 (0x0102)
|
|---|
| 131 | SCT Support Level: 1
|
|---|
| 132 | Device State: Active (0)
|
|---|
| 133 | Current Temperature: 37 Celsius
|
|---|
| 134 | Power Cycle Min/Max Temperature: 33/40 Celsius
|
|---|
| 135 | Lifetime Min/Max Temperature: 0/40 Celsius
|
|---|
| 136 | Under/Over Temperature Limit Count: 0/0
|
|---|
| 137 | Vendor specific:
|
|---|
| 138 | 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
|---|
| 139 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
|---|
| 140 |
|
|---|
| 141 | SCT Temperature History Version: 2
|
|---|
| 142 | Temperature Sampling Period: 1 minute
|
|---|
| 143 | Temperature Logging Interval: 1 minute
|
|---|
| 144 | Min/Max recommended Temperature: 0/60 Celsius
|
|---|
| 145 | Min/Max Temperature Limit: -41/85 Celsius
|
|---|
| 146 | Temperature History Size (Index): 478 (410)
|
|---|
| 147 |
|
|---|
| 148 | Index Estimated Time Temperature Celsius
|
|---|
| 149 | 411 2022-07-10 05:19 36 *****************
|
|---|
| 150 | ... ..( 53 skipped). .. *****************
|
|---|
| 151 | 465 2022-07-10 06:13 36 *****************
|
|---|
| 152 | 466 2022-07-10 06:14 37 ******************
|
|---|
| 153 | ... ..(247 skipped). .. ******************
|
|---|
| 154 | 236 2022-07-10 10:22 37 ******************
|
|---|
| 155 | 237 2022-07-10 10:23 36 *****************
|
|---|
| 156 | ... ..(172 skipped). .. *****************
|
|---|
| 157 | 410 2022-07-10 13:16 36 *****************
|
|---|
| 158 |
|
|---|
| 159 | SCT Error Recovery Control:
|
|---|
| 160 | Read: 70 (7.0 seconds)
|
|---|
| 161 | Write: 70 (7.0 seconds)
|
|---|
| 162 |
|
|---|
| 163 | Device Statistics (GP Log 0x04)
|
|---|
| 164 | Page Offset Size Value Flags Description
|
|---|
| 165 | 0x01 ===== = = === == General Statistics (rev 2) ==
|
|---|
| 166 | 0x01 0x008 4 2 --- Lifetime Power-On Resets
|
|---|
| 167 | 0x01 0x010 4 2446 --- Power-on Hours
|
|---|
| 168 | 0x01 0x018 6 5209974164 --- Logical Sectors Written
|
|---|
| 169 | 0x01 0x020 6 27560532 --- Number of Write Commands
|
|---|
| 170 | 0x01 0x028 6 3139372024 --- Logical Sectors Read
|
|---|
| 171 | 0x01 0x030 6 5710172 --- Number of Read Commands
|
|---|
| 172 | 0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
|
|---|
| 173 | 0x03 0x008 4 2401 --- Spindle Motor Power-on Hours
|
|---|
| 174 | 0x03 0x010 4 2401 --- Head Flying Hours
|
|---|
| 175 | 0x03 0x018 4 2 --- Head Load Events
|
|---|
| 176 | 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
|
|---|
| 177 | 0x03 0x028 4 0 --- Read Recovery Attempts
|
|---|
| 178 | 0x03 0x030 4 0 --- Number of Mechanical Start Failures
|
|---|
| 179 | 0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
|---|
| 180 | 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
|---|
| 181 | 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
|---|
| 182 | 0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
|---|
| 183 | 0x05 0x008 1 37 --- Current Temperature
|
|---|
| 184 | 0x05 0x010 1 37 --- Average Short Term Temperature
|
|---|
| 185 | 0x05 0x018 1 36 --- Average Long Term Temperature
|
|---|
| 186 | 0x05 0x020 1 40 --- Highest Temperature
|
|---|
| 187 | 0x05 0x028 1 22 --- Lowest Temperature
|
|---|
| 188 | 0x05 0x030 1 39 --- Highest Average Short Term Temperature
|
|---|
| 189 | 0x05 0x038 1 32 --- Lowest Average Short Term Temperature
|
|---|
| 190 | 0x05 0x040 1 36 --- Highest Average Long Term Temperature
|
|---|
| 191 | 0x05 0x048 1 33 --- Lowest Average Long Term Temperature
|
|---|
| 192 | 0x05 0x050 4 0 --- Time in Over-Temperature
|
|---|
| 193 | 0x05 0x058 1 60 --- Specified Maximum Operating Temperature
|
|---|
| 194 | 0x05 0x060 4 0 --- Time in Under-Temperature
|
|---|
| 195 | 0x05 0x068 1 0 --- Specified Minimum Operating Temperature
|
|---|
| 196 | 0x06 ===== = = === == Transport Statistics (rev 1) ==
|
|---|
| 197 | 0x06 0x008 4 15 --- Number of Hardware Resets
|
|---|
| 198 | 0x06 0x010 4 8 --- Number of ASR Events
|
|---|
| 199 | 0x06 0x018 4 0 --- Number of Interface CRC Errors
|
|---|
| 200 | |||_ C monitored condition met
|
|---|
| 201 | ||__ D supports DSN
|
|---|
| 202 | |___ N normalized value
|
|---|
| 203 |
|
|---|
| 204 | SATA Phy Event Counters (GP Log 0x11)
|
|---|
| 205 | ID Size Value Description
|
|---|
| 206 | 0x0001 2 0 Command failed due to ICRC error
|
|---|
| 207 | 0x0002 2 0 R_ERR response for data FIS
|
|---|
| 208 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
|---|
| 209 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
|---|
| 210 | 0x0005 2 0 R_ERR response for non-data FIS
|
|---|
| 211 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|---|
| 212 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|---|
| 213 | 0x0008 2 0 Device-to-host non-data FIS retries
|
|---|
| 214 | 0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy
|
|---|
| 215 | 0x000a 2 9 Device-to-host register FISes sent due to a COMRESET
|
|---|
| 216 | 0x000b 2 0 CRC errors within host-to-device FIS
|
|---|
| 217 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|---|
| 218 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
|---|
| 219 | 0x8000 4 6640247 Vendor specific
|
|---|
| 220 |
|
|---|
