1 | cmd prompt # smartctl -x /dev/sdd > /data/install/smartctl-western-digital-wd121purp.txt
|
---|
2 |
|
---|
3 | smartctl 7.2 2021-09-14 r5237 [x86_64-linux-5.16.11-1-default] (SUSE RPM)
|
---|
4 | Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
5 |
|
---|
6 | === START OF INFORMATION SECTION ===
|
---|
7 | Device Model: WDC WD121PURP-85B5SY0
|
---|
8 | Serial Number:
|
---|
9 | LU WWN Device Id:
|
---|
10 | Firmware Version: 82.00A82
|
---|
11 | User Capacity: 12,000,138,625,024 bytes [12.0 TB]
|
---|
12 | Sector Sizes: 512 bytes logical, 4096 bytes physical
|
---|
13 | Rotation Rate: 7200 rpm
|
---|
14 | Form Factor: 3.5 inches
|
---|
15 | Device is: Not in smartctl database [for details use: -P showall]
|
---|
16 | ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
|
---|
17 | SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
---|
18 | Local Time is: Mon Mar 21 16:30:28 2022 CET
|
---|
19 | SMART support is: Available - device has SMART capability.
|
---|
20 | SMART support is: Enabled
|
---|
21 | AAM feature is: Unavailable
|
---|
22 | APM level is: 254 (maximum performance)
|
---|
23 | Rd look-ahead is: Enabled
|
---|
24 | Write cache is: Enabled
|
---|
25 | DSN feature is: Unavailable
|
---|
26 | ATA Security is: Disabled, frozen [SEC2]
|
---|
27 | Wt Cache Reorder: Enabled
|
---|
28 |
|
---|
29 | === START OF READ SMART DATA SECTION ===
|
---|
30 | SMART overall-health self-assessment test result: PASSED
|
---|
31 |
|
---|
32 | General SMART Values:
|
---|
33 | Offline data collection status: (0x82) Offline data collection activity
|
---|
34 | was completed without error.
|
---|
35 | Auto Offline Data Collection: Enabled.
|
---|
36 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
37 | without error or no self-test has ever
|
---|
38 | been run.
|
---|
39 | Total time to complete Offline
|
---|
40 | data collection: ( 87) seconds.
|
---|
41 | Offline data collection
|
---|
42 | capabilities: (0x5b) SMART execute Offline immediate.
|
---|
43 | Auto Offline data collection on/off support.
|
---|
44 | Suspend Offline collection upon new
|
---|
45 | command.
|
---|
46 | Offline surface scan supported.
|
---|
47 | Self-test supported.
|
---|
48 | No Conveyance Self-test supported.
|
---|
49 | Selective Self-test supported.
|
---|
50 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
51 | power-saving mode.
|
---|
52 | Supports SMART auto save timer.
|
---|
53 | Error logging capability: (0x01) Error logging supported.
|
---|
54 | General Purpose Logging supported.
|
---|
55 | Short self-test routine
|
---|
56 | recommended polling time: ( 2) minutes.
|
---|
57 | Extended self-test routine
|
---|
58 | recommended polling time: (1256) minutes.
|
---|
59 | SCT capabilities: (0x003d) SCT Status supported.
|
---|
60 | SCT Error Recovery Control supported.
|
---|
61 | SCT Feature Control supported.
|
---|
62 | SCT Data Table supported.
|
---|
63 |
|
---|
64 | SMART Attributes Data Structure revision number: 16
|
---|
65 | Vendor Specific SMART Attributes with Thresholds:
|
---|
66 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
---|
67 | 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
|
---|
68 | 2 Throughput_Performance --S--- 132 132 054 - 96
|
---|
69 | 3 Spin_Up_Time POS--- 100 100 024 - 0
|
---|
70 | 4 Start_Stop_Count -O--C- 100 100 000 - 1
|
---|
71 | 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
|
---|
72 | 7 Seek_Error_Rate -O-R-- 100 100 067 - 0
|
---|
73 | 8 Seek_Time_Performance --S--- 140 140 020 - 15
|
---|
74 | 9 Power_On_Hours -O--C- 100 100 000 - 285
|
---|
75 | 10 Spin_Retry_Count -O--C- 100 100 060 - 0
|
---|
76 | 12 Power_Cycle_Count -O--CK 100 100 000 - 1
|
---|
77 | 22 Unknown_Attribute PO---K 100 100 025 - 100
|
---|
78 | 192 Power-Off_Retract_Count -O--CK 100 100 000 - 13
|
---|
79 | 193 Load_Cycle_Count -O--C- 100 100 000 - 13
|
---|
80 | 194 Temperature_Celsius -O---- 175 175 000 - 37 (Min/Max 20/38)
|
---|
81 | 196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
---|
82 | 197 Current_Pending_Sector -O---K 100 100 000 - 0
|
---|
83 | 198 Offline_Uncorrectable ---R-- 100 100 000 - 0
|
---|
84 | 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
|
---|
85 | ||||||_ K auto-keep
|
---|
86 | |||||__ C event count
|
---|
87 | ||||___ R error rate
|
---|
88 | |||____ S speed/performance
|
---|
89 | ||_____ O updated online
|
---|
90 | |______ P prefailure warning
|
---|
91 |
|
---|
92 | General Purpose Log Directory Version 1
|
---|
93 | SMART Log Directory Version 1 [multi-sector log support]
|
---|
94 | Address Access R/W Size Description
|
---|
95 | 0x00 GPL,SL R/O 1 Log Directory
|
---|
96 | 0x01 SL R/O 1 Summary SMART error log
|
---|
97 | 0x02 SL R/O 1 Comprehensive SMART error log
|
---|
98 | 0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
---|
99 | 0x04 GPL R/O 256 Device Statistics log
|
---|
100 | 0x04 SL R/O 255 Device Statistics log
|
---|
101 | 0x06 SL R/O 1 SMART self-test log
|
---|
102 | 0x07 GPL R/O 1 Extended self-test log
|
---|
103 | 0x09 SL R/W 1 Selective self-test log
|
---|
104 | 0x0c GPL R/O 5501 Pending Defects log
|
---|
105 | 0x10 GPL R/O 1 NCQ Command Error log
|
---|
106 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
---|
107 | 0x12 GPL R/O 1 SATA NCQ Non-Data log
|
---|
108 | 0x13 GPL R/O 1 SATA NCQ Send and Receive log
|
---|
109 | 0x15 GPL R/W 1 Rebuild Assist log
|
---|
110 | 0x21 GPL R/O 1 Write stream error log
|
---|
111 | 0x22 GPL R/O 1 Read stream error log
|
---|
112 | 0x24 GPL R/O 256 Current Device Internal Status Data log
|
---|
113 | 0x25 GPL R/O 256 Saved Device Internal Status Data log
|
---|
114 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
---|
115 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
---|
116 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
---|
117 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
---|
118 |
|
---|
119 | SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
---|
120 | No Errors Logged
|
---|
121 |
|
---|
122 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
---|
123 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
---|
124 | # 1 Short offline Completed without error 00% 285 -
|
---|
125 | # 2 Short offline Completed without error 00% 272 -
|
---|
126 | # 3 Short offline Completed without error 00% 248 -
|
---|
127 | # 4 Short offline Completed without error 00% 224 -
|
---|
128 | # 5 Short offline Completed without error 00% 200 -
|
---|
129 | # 6 Short offline Completed without error 00% 176 -
|
---|
130 | # 7 Short offline Completed without error 00% 152 -
|
---|
131 | # 8 Short offline Completed without error 00% 128 -
|
---|
132 | # 9 Short offline Completed without error 00% 104 -
|
---|
133 | #10 Short offline Completed without error 00% 80 -
|
---|
134 | #11 Short offline Completed without error 00% 56 -
|
---|
135 | #12 Short offline Completed without error 00% 32 -
|
---|
136 | #13 Short offline Completed without error 00% 8 -
|
---|
137 |
|
---|
138 | SMART Selective self-test log data structure revision number 1
|
---|
139 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
140 | 1 0 0 Not_testing
|
---|
141 | 2 0 0 Not_testing
|
---|
142 | 3 0 0 Not_testing
|
---|
143 | 4 0 0 Not_testing
|
---|
144 | 5 0 0 Not_testing
|
---|
145 | Selective self-test flags (0x0):
|
---|
146 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
147 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
148 |
|
---|
149 | SCT Status Version: 3
|
---|
150 | SCT Version (vendor specific): 256 (0x0100)
|
---|
151 | Device State: Active (0)
|
---|
152 | Current Temperature: 37 Celsius
|
---|
153 | Power Cycle Min/Max Temperature: 20/38 Celsius
|
---|
154 | Lifetime Min/Max Temperature: 20/38 Celsius
|
---|
155 | Under/Over Temperature Limit Count: 0/0
|
---|
156 |
|
---|
157 | SCT Temperature History Version: 2
|
---|
158 | Temperature Sampling Period: 1 minute
|
---|
159 | Temperature Logging Interval: 1 minute
|
---|
160 | Min/Max recommended Temperature: 0/65 Celsius
|
---|
161 | Min/Max Temperature Limit: -40/70 Celsius
|
---|
162 | Temperature History Size (Index): 128 (124)
|
---|
163 |
|
---|
164 | Index Estimated Time Temperature Celsius
|
---|
165 | 125 2022-03-21 14:23 37 ******************
|
---|
166 | ... ..(126 skipped). .. ******************
|
---|
167 | 124 2022-03-21 16:30 37 ******************
|
---|
168 |
|
---|
169 | SCT Error Recovery Control:
|
---|
170 | Read: 70 (7.0 seconds)
|
---|
171 | Write: 70 (7.0 seconds)
|
---|
172 |
|
---|
173 | Device Statistics (GP Log 0x04)
|
---|
174 | Page Offset Size Value Flags Description
|
---|
175 | 0x01 ===== = = === == General Statistics (rev 1) ==
|
---|
176 | 0x01 0x008 4 1 --- Lifetime Power-On Resets
|
---|
177 | 0x01 0x010 4 285 --- Power-on Hours
|
---|
178 | 0x01 0x018 6 10251447912 --- Logical Sectors Written
|
---|
179 | 0x01 0x020 6 6795644 --- Number of Write Commands
|
---|
180 | 0x01 0x028 6 38701070 --- Logical Sectors Read
|
---|
181 | 0x01 0x030 6 3055653 --- Number of Read Commands
|
---|
182 | 0x01 0x038 6 1029054450 --- Date and Time TimeStamp
|
---|
183 | 0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
|
---|
184 | 0x03 0x008 4 285 --- Spindle Motor Power-on Hours
|
---|
185 | 0x03 0x010 4 285 --- Head Flying Hours
|
---|
186 | 0x03 0x018 4 13 --- Head Load Events
|
---|
187 | 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
|
---|
188 | 0x03 0x028 4 0 --- Read Recovery Attempts
|
---|
189 | 0x03 0x030 4 0 --- Number of Mechanical Start Failures
|
---|
190 | 0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
---|
191 | 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
---|
192 | 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
---|
193 | 0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
---|
194 | 0x05 0x008 1 37 --- Current Temperature
|
---|
195 | 0x05 0x010 1 36 N-- Average Short Term Temperature
|
---|
196 | 0x05 0x018 1 - N-- Average Long Term Temperature
|
---|
197 | 0x05 0x020 1 38 --- Highest Temperature
|
---|
198 | 0x05 0x028 1 20 --- Lowest Temperature
|
---|
199 | 0x05 0x030 1 37 N-- Highest Average Short Term Temperature
|
---|
200 | 0x05 0x038 1 23 N-- Lowest Average Short Term Temperature
|
---|
201 | 0x05 0x040 1 - N-- Highest Average Long Term Temperature
|
---|
202 | 0x05 0x048 1 - N-- Lowest Average Long Term Temperature
|
---|
203 | 0x05 0x050 4 0 --- Time in Over-Temperature
|
---|
204 | 0x05 0x058 1 65 --- Specified Maximum Operating Temperature
|
---|
205 | 0x05 0x060 4 0 --- Time in Under-Temperature
|
---|
206 | 0x05 0x068 1 0 --- Specified Minimum Operating Temperature
|
---|
207 | 0x06 ===== = = === == Transport Statistics (rev 1) ==
|
---|
208 | 0x06 0x008 4 7 --- Number of Hardware Resets
|
---|
209 | 0x06 0x010 4 1 --- Number of ASR Events
|
---|
210 | 0x06 0x018 4 0 --- Number of Interface CRC Errors
|
---|
211 | 0xff ===== = = === == Vendor Specific Statistics (rev 1) ==
|
---|
212 | 0xff 0x040 7 20 --- Vendor Specific
|
---|
213 | 0xff 0x048 7 15 --- Vendor Specific
|
---|
214 | 0xff 0x050 7 0 --- Vendor Specific
|
---|
215 | 0xff 0x058 7 0 --- Vendor Specific
|
---|
216 | 0xff 0x060 7 0 --- Vendor Specific
|
---|
217 | 0xff 0x068 7 0 --- Vendor Specific
|
---|
218 | 0xff 0x070 7 0 --- Vendor Specific
|
---|
219 | 0xff 0x078 7 0 --- Vendor Specific
|
---|
220 | 0xff 0x080 7 0 --- Vendor Specific
|
---|
221 | |||_ C monitored condition met
|
---|
222 | ||__ D supports DSN
|
---|
223 | |___ N normalized value
|
---|
224 |
|
---|
225 | Pending Defects log (GP Log 0x0c)
|
---|
226 | No Defects Logged
|
---|
227 |
|
---|
228 | SATA Phy Event Counters (GP Log 0x11)
|
---|
229 | ID Size Value Description
|
---|
230 | 0x0001 2 0 Command failed due to ICRC error
|
---|
231 | 0x0002 2 0 R_ERR response for data FIS
|
---|
232 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
---|
233 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
---|
234 | 0x0005 2 0 R_ERR response for non-data FIS
|
---|
235 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
---|
236 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
---|
237 | 0x0008 2 0 Device-to-host non-data FIS retries
|
---|
238 | 0x0009 2 7 Transition from drive PhyRdy to drive PhyNRdy
|
---|
239 | 0x000a 2 8 Device-to-host register FISes sent due to a COMRESET
|
---|
240 | 0x000b 2 0 CRC errors within host-to-device FIS
|
---|
241 | 0x000d 2 0 Non-CRC errors within host-to-device FIS
|
---|
242 |
|
---|