Ticket #1580: smartctl-Seagate-BUP-Fast-HDD.txt

File smartctl-Seagate-BUP-Fast-HDD.txt, 8.7 KB (added by Eaton Zveare, 2 years ago)
Line 
1smartctl 7.3 2022-02-28 r5338 [x86_64-w64-mingw32-w11-21H2] (sf-7.3-1)
2Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
3
4=== START OF INFORMATION SECTION ===
5Device Model: ASMT109x- Fast
6Serial Number: S34SJ9FGC00697
7LU WWN Device Id: 5 0004cf 2116c59ba
8Firmware Version: 402220F0
9User Capacity: 4,000,797,859,840 bytes [4.00 TB]
10Sector Sizes: 512 bytes logical, 4096 bytes physical
11Rotation Rate: 5400 rpm
12Form Factor: 2.5 inches
13Device is: Not in smartctl database 7.3/5319
14ATA Version is: ATA8-ACS T13/1699-D revision 6
15SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
16Local Time is: Fri Apr 01 20:27:21 2022 EDT
17SMART support is: Available - device has SMART capability.
18SMART support is: Enabled
19AAM feature is: Disabled
20APM feature is: Disabled
21Rd look-ahead is: Enabled
22Write cache is: Enabled
23DSN feature is: Unavailable
24ATA Security is: Disabled, NOT FROZEN [SEC1]
25Wt Cache Reorder: Enabled
26
27=== START OF READ SMART DATA SECTION ===
28SMART overall-health self-assessment test result: PASSED
29
30General SMART Values:
31Offline data collection status: (0x00) Offline data collection activity
32 was never started.
33 Auto Offline Data Collection: Disabled.
34Self-test execution status: ( 0) The previous self-test routine completed
35 without error or no self-test has ever
36 been run.
37Total time to complete Offline
38data collection: (22320) seconds.
39Offline data collection
40capabilities: (0x5b) SMART execute Offline immediate.
41 Auto Offline data collection on/off support.
42 Suspend Offline collection upon new
43 command.
44 Offline surface scan supported.
45 Self-test supported.
46 No Conveyance Self-test supported.
47 Selective Self-test supported.
48SMART capabilities: (0x0003) Saves SMART data before entering
49 power-saving mode.
50 Supports SMART auto save timer.
51Error logging capability: (0x01) Error logging supported.
52 General Purpose Logging supported.
53Short self-test routine
54recommended polling time: ( 1) minutes.
55Extended self-test routine
56recommended polling time: ( 372) minutes.
57SCT capabilities: (0x003f) SCT Status supported.
58 SCT Error Recovery Control supported.
59 SCT Feature Control supported.
60 SCT Data Table supported.
61
62SMART Attributes Data Structure revision number: 16
63Vendor Specific SMART Attributes with Thresholds:
64ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
65 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 0
66 2 Throughput_Performance -OS--K 252 252 000 - 0
67 3 Spin_Up_Time PO---K 087 083 025 - 4083
68 4 Start_Stop_Count -O--CK 033 033 000 - 67762
69 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0
70 7 Seek_Error_Rate -OSR-K 252 252 051 - 0
71 8 Seek_Time_Performance --S--K 252 252 015 - 0
72 9 Power_On_Hours -O--CK 100 100 000 - 3396
73 10 Spin_Retry_Count -O--CK 252 252 051 - 0
74 12 Power_Cycle_Count -O--CK 100 100 000 - 234
75191 G-Sense_Error_Rate -O---K 252 252 000 - 0
76192 Power-Off_Retract_Count -O---K 252 252 000 - 0
77194 Temperature_Celsius -O---- 064 045 000 - 29 (Min/Max 16/70)
78195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0
79196 Reallocated_Event_Count -O--CK 252 252 000 - 0
80197 Current_Pending_Sector -O--CK 252 252 000 - 0
81198 Offline_Uncorrectable ----CK 252 252 000 - 0
82199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0
83200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 4
84223 Load_Retry_Count -O--CK 100 100 000 - 12
85225 Load_Cycle_Count -O--CK 088 088 000 - 125659
86241 Total_LBAs_Written -O--CK 097 090 000 - 4650233
87242 Total_LBAs_Read -O--CK 091 090 000 - 12700056
88 ||||||_ K auto-keep
89 |||||__ C event count
90 ||||___ R error rate
91 |||____ S speed/performance
92 ||_____ O updated online
93 |______ P prefailure warning
94
95ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: scsi error aborted command
96Read GP Log Directory failed
97
98SMART Log Directory Version 1 [multi-sector log support]
99Address Access R/W Size Description
1000x00 SL R/O 1 Log Directory
1010x01 SL R/O 1 Summary SMART error log
1020x02 SL R/O 2 Comprehensive SMART error log
1030x06 SL R/O 1 SMART self-test log
1040x09 SL R/W 1 Selective self-test log
1050x80-0x9f SL R/W 16 Host vendor specific log
1060xc0-0xdf SL VS 16 Device vendor specific log
1070xe0 SL R/W 1 SCT Command/Status
1080xe1 SL R/W 1 SCT Data Transfer
109
110SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
111
112Read SMART Error Log failed: SAT command failed
113
114SMART Extended Self-test Log (GP Log 0x07) not supported
115
116SMART Self-test log structure revision number 1
117Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
118# 1 Short offline Completed without error 00% 3396 -
119
120SMART Selective self-test log data structure revision number 0
121Note: revision number not 1 implies that no selective self-test has ever been run
122 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
123 1 0 0 Completed [00% left] (0-65535)
124 2 0 0 Not_testing
125 3 0 0 Not_testing
126 4 0 0 Not_testing
127 5 0 0 Not_testing
128Selective self-test flags (0x0):
129 After scanning selected spans, do NOT read-scan remainder of disk.
130If Selective self-test is pending on power-up, resume after 0 minute delay.
131
132SCT Status Version: 2
133SCT Version (vendor specific): 256 (0x0100)
134Device State: Active (0)
135Current Temperature: 31 Celsius
136Power Cycle Min/Max Temperature: 25/31 Celsius
137Lifetime Min/Max Temperature: 19/70 Celsius
138Specified Max Operating Temperature: 80 Celsius
139Under/Over Temperature Limit Count: 0/0
140
141SCT Temperature History Version: 2
142Temperature Sampling Period: 5 minutes
143Temperature Logging Interval: 5 minutes
144Min/Max recommended Temperature: -5/80 Celsius
145Min/Max Temperature Limit: -10/85 Celsius
146Temperature History Size (Index): 128 (100)
147
148Index Estimated Time Temperature Celsius
149 101 2022-04-01 09:50 31 ************
150 102 2022-04-01 09:55 38 *******************
151 ... ..( 6 skipped). .. *******************
152 109 2022-04-01 10:30 38 *******************
153 110 2022-04-01 10:35 39 ********************
154 111 2022-04-01 10:40 38 *******************
155 ... ..( 6 skipped). .. *******************
156 118 2022-04-01 11:15 38 *******************
157 119 2022-04-01 11:20 37 ******************
158 ... ..( 7 skipped). .. ******************
159 127 2022-04-01 12:00 37 ******************
160 0 2022-04-01 12:05 38 *******************
161 ... ..( 48 skipped). .. *******************
162 49 2022-04-01 16:10 38 *******************
163 50 2022-04-01 16:15 33 **************
164 51 2022-04-01 16:20 34 ***************
165 52 2022-04-01 16:25 36 *****************
166 53 2022-04-01 16:30 36 *****************
167 54 2022-04-01 16:35 37 ******************
168 55 2022-04-01 16:40 37 ******************
169 56 2022-04-01 16:45 37 ******************
170 57 2022-04-01 16:50 38 *******************
171 ... ..( 5 skipped). .. *******************
172 63 2022-04-01 17:20 38 *******************
173 64 2022-04-01 17:25 39 ********************
174 65 2022-04-01 17:30 38 *******************
175 66 2022-04-01 17:35 38 *******************
176 67 2022-04-01 17:40 39 ********************
177 ... ..( 28 skipped). .. ********************
178 96 2022-04-01 20:05 39 ********************
179 97 2022-04-01 20:10 32 *************
180 98 2022-04-01 20:15 35 ****************
181 99 2022-04-01 20:20 38 *******************
182 100 2022-04-01 20:25 39 ********************
183
184Write SCT (Get) Error Recovery Control Command failed: scsi error aborted command
185SCT (Get) Error Recovery Control command failed
186
187Device Statistics (GP/SMART Log 0x04) not supported
188
189Pending Defects log (GP Log 0x0c) not supported
190
191SATA Phy Event Counters (GP Log 0x11) not supported
192