1 | smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-60-generic] (local build) |
---|
2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org |
---|
3 | |
---|
4 | === START OF INFORMATION SECTION === |
---|
5 | Device Model: TS32GMSM360 |
---|
6 | Serial Number: 0408739FE27768700036 |
---|
7 | LU WWN Device Id: 0 000000 000000000 |
---|
8 | Firmware Version: Q0407A |
---|
9 | User Capacity: 32.017.047.552 bytes [32,0 GB] |
---|
10 | Sector Size: 512 bytes logical/physical |
---|
11 | Rotation Rate: Solid State Device |
---|
12 | Form Factor: mSATA |
---|
13 | Device is: Not in smartctl database [for details use: -P showall] |
---|
14 | ATA Version is: ACS-2 (minor revision not indicated) |
---|
15 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) |
---|
16 | Local Time is: Thu Mar 24 12:12:54 2022 EDT |
---|
17 | SMART support is: Available - device has SMART capability. |
---|
18 | SMART support is: Enabled |
---|
19 | AAM feature is: Unavailable |
---|
20 | APM level is: 254 (maximum performance) |
---|
21 | Rd look-ahead is: Disabled |
---|
22 | Write cache is: Enabled |
---|
23 | ATA Security is: Disabled, frozen [SEC2] |
---|
24 | Wt Cache Reorder: Unavailable |
---|
25 | |
---|
26 | === START OF READ SMART DATA SECTION === |
---|
27 | SMART overall-health self-assessment test result: PASSED |
---|
28 | |
---|
29 | General SMART Values: |
---|
30 | Offline data collection status: (0x02) Offline data collection activity |
---|
31 | was completed without error. |
---|
32 | Auto Offline Data Collection: Disabled. |
---|
33 | Self-test execution status: ( 0) The previous self-test routine completed |
---|
34 | without error or no self-test has ever |
---|
35 | been run. |
---|
36 | Total time to complete Offline |
---|
37 | data collection: ( 120) seconds. |
---|
38 | Offline data collection |
---|
39 | capabilities: (0x11) SMART execute Offline immediate. |
---|
40 | No Auto Offline data collection support. |
---|
41 | Suspend Offline collection upon new |
---|
42 | command. |
---|
43 | No Offline surface scan supported. |
---|
44 | Self-test supported. |
---|
45 | No Conveyance Self-test supported. |
---|
46 | No Selective Self-test supported. |
---|
47 | SMART capabilities: (0x0002) Does not save SMART data before |
---|
48 | entering power-saving mode. |
---|
49 | Supports SMART auto save timer. |
---|
50 | Error logging capability: (0x01) Error logging supported. |
---|
51 | General Purpose Logging supported. |
---|
52 | Short self-test routine |
---|
53 | recommended polling time: ( 1) minutes. |
---|
54 | Extended self-test routine |
---|
55 | recommended polling time: ( 1) minutes. |
---|
56 | |
---|
57 | SMART Attributes Data Structure revision number: 1 |
---|
58 | Vendor Specific SMART Attributes with Thresholds: |
---|
59 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE |
---|
60 | 1 Raw_Read_Error_Rate ------ 100 100 050 - 0 |
---|
61 | 5 Reallocated_Sector_Ct -O---- 100 100 050 - 0 |
---|
62 | 9 Power_On_Hours ------ 100 100 050 - 76 |
---|
63 | 12 Power_Cycle_Count ------ 100 100 050 - 8058 |
---|
64 | 160 Unknown_Attribute ------ 100 100 050 - 0 |
---|
65 | 161 Unknown_Attribute ------ 100 100 050 - 179 |
---|
66 | 162 Unknown_Attribute ------ 100 100 050 - 1 |
---|
67 | 163 Unknown_Attribute ------ 100 100 050 - 10 |
---|
68 | 164 Unknown_Attribute ------ 100 100 050 - 237153 |
---|
69 | 165 Unknown_Attribute ------ 100 100 050 - 132 |
---|
70 | 166 Unknown_Attribute ------ 100 100 050 - 79 |
---|
71 | 167 Unknown_Attribute ------ 100 100 050 - 113 |
---|
72 | 168 Unknown_Attribute ------ 100 100 050 - 3000 |
---|
73 | 169 Unknown_Attribute ------ 097 097 050 - 97 |
---|
74 | 192 Power-Off_Retract_Count ------ 100 100 050 - 7946 |
---|
75 | 194 Temperature_Celsius ------ 100 100 050 - 28 |
---|
76 | 195 Hardware_ECC_Recovered ------ 100 100 050 - 397833 |
---|
77 | 196 Reallocated_Event_Count ------ 100 100 050 - 0 |
---|
78 | 199 UDMA_CRC_Error_Count ------ 100 100 050 - 0 |
---|
79 | 241 Total_LBAs_Written ------ 100 100 050 - 50550 |
---|
80 | 242 Total_LBAs_Read ------ 100 100 050 - 32831 |
---|
81 | 245 Unknown_Attribute ------ 100 100 050 - 100000 |
---|
82 | ||||||_ K auto-keep |
---|
83 | |||||__ C event count |
---|
84 | ||||___ R error rate |
---|
85 | |||____ S speed/performance |
---|
86 | ||_____ O updated online |
---|
87 | |______ P prefailure warning |
---|
88 | |
---|
89 | General Purpose Log Directory Version 1 |
---|
90 | SMART Log Directory Version 1 [multi-sector log support] |
---|
91 | Address Access R/W Size Description |
---|
92 | 0x00 GPL,SL R/O 1 Log Directory |
---|
93 | 0x01 SL R/O 1 Summary SMART error log |
---|
94 | 0x02 SL R/O 1 Comprehensive SMART error log |
---|
95 | 0x03 GPL R/O 1 Ext. Comprehensive SMART error log |
---|
96 | 0x04 GPL,SL R/O 8 Device Statistics log |
---|
97 | 0x06 SL R/O 1 SMART self-test log |
---|
98 | 0x07 GPL R/O 1 Extended self-test log |
---|
99 | 0x09 SL R/W 1 Selective self-test log |
---|
100 | 0x10 GPL R/O 1 SATA NCQ Queued Error log |
---|
101 | 0x11 GPL R/O 1 SATA Phy Event Counters log |
---|
102 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log |
---|
103 | 0x31 GPL - 4 Reserved |
---|
104 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log |
---|
105 | |
---|
106 | Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. |
---|
107 | SMART Extended Comprehensive Error Log Version: 1 (1 sectors) |
---|
108 | Device Error Count: 4 |
---|
109 | CR = Command Register |
---|
110 | FEATR = Features Register |
---|
111 | COUNT = Count (was: Sector Count) Register |
---|
112 | LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 |
---|
113 | LH = LBA High (was: Cylinder High) Register ] LBA |
---|
114 | LM = LBA Mid (was: Cylinder Low) Register ] Register |
---|
115 | LL = LBA Low (was: Sector Number) Register ] |
---|
116 | DV = Device (was: Device/Head) Register |
---|
117 | DC = Device Control Register |
---|
118 | ER = Error register |
---|
119 | ST = Status register |
---|
120 | Powered_Up_Time is measured from power on, and printed as |
---|
121 | DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, |
---|
122 | SS=sec, and sss=millisec. It "wraps" after 49.710 days. |
---|
123 | |
---|
124 | Error 4 [3] log entry is empty |
---|
125 | Error 3 [2] log entry is empty |
---|
126 | Error 2 [1] log entry is empty |
---|
127 | Error 1 [0] log entry is empty |
---|
128 | Warning! SMART Extended Self-test Log Structure error: invalid SMART checksum. |
---|
129 | SMART Extended Self-test Log Version: 1 (1 sectors) |
---|
130 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error |
---|
131 | # 1 Short offline Completed without error 00% 76 - |
---|
132 | |
---|
133 | Selective Self-tests/Logging not supported |
---|
134 | |
---|
135 | SCT Commands not supported |
---|
136 | |
---|
137 | Device Statistics (GP Log 0x04) |
---|
138 | Page Offset Size Value Flags Description |
---|
139 | 0x01 ===== = = === == General Statistics (rev 1) == |
---|
140 | 0x01 0x008 4 8058 --- Lifetime Power-On Resets |
---|
141 | 0x01 0x010 4 76 --- Power-on Hours |
---|
142 | 0x01 0x018 6 3312878681 --- Logical Sectors Written |
---|
143 | 0x01 0x020 6 24673662 --- Number of Write Commands |
---|
144 | 0x01 0x028 6 2151661473 --- Logical Sectors Read |
---|
145 | 0x01 0x030 6 15458572 --- Number of Read Commands |
---|
146 | 0x04 ===== = = === == General Errors Statistics (rev 1) == |
---|
147 | 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors |
---|
148 | 0x04 0x010 4 163988 --- Resets Between Cmd Acceptance and Completion |
---|
149 | 0x05 ===== = = === == Temperature Statistics (rev 1) == |
---|
150 | 0x05 0x008 1 30 --- Current Temperature |
---|
151 | 0x05 0x010 1 -112 --- Average Short Term Temperature |
---|
152 | 0x05 0x018 1 4 --- Average Long Term Temperature |
---|
153 | 0x05 0x020 1 56 --- Highest Temperature |
---|
154 | 0x05 0x028 1 8 --- Lowest Temperature |
---|
155 | 0x05 0x030 1 -1 --- Highest Average Short Term Temperature |
---|
156 | 0x05 0x038 1 0 --- Lowest Average Short Term Temperature |
---|
157 | 0x05 0x040 1 -1 --- Highest Average Long Term Temperature |
---|
158 | 0x05 0x048 1 0 --- Lowest Average Long Term Temperature |
---|
159 | 0x05 0x050 4 0 --- Time in Over-Temperature |
---|
160 | 0x05 0x058 1 100 --- Specified Maximum Operating Temperature |
---|
161 | 0x05 0x060 4 0 --- Time in Under-Temperature |
---|
162 | 0x05 0x068 1 0 --- Specified Minimum Operating Temperature |
---|
163 | 0x06 ===== = = === == Transport Statistics (rev 1) == |
---|
164 | 0x06 0x008 4 3785 --- Number of Hardware Resets |
---|
165 | 0x06 0x018 4 0 --- Number of Interface CRC Errors |
---|
166 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) == |
---|
167 | 0x07 0x008 1 3 --- Percentage Used Endurance Indicator |
---|
168 | |||_ C monitored condition met |
---|
169 | ||__ D supports DSN |
---|
170 | |___ N normalized value |
---|
171 | |
---|
172 | SATA Phy Event Counters (GP Log 0x11) |
---|
173 | ID Size Value Description |
---|
174 | 0x0001 2 0 Command failed due to ICRC error |
---|
175 | 0x0002 2 0 R_ERR response for data FIS |
---|
176 | 0x0003 2 0 R_ERR response for device-to-host data FIS |
---|
177 | 0x0004 2 0 R_ERR response for host-to-device data FIS |
---|
178 | 0x0005 2 0 R_ERR response for non-data FIS |
---|
179 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS |
---|
180 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS |
---|
181 | 0x0008 2 0 Device-to-host non-data FIS retries |
---|
182 | 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy |
---|
183 | 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET |
---|
184 | 0x000b 2 0 CRC errors within host-to-device FIS |
---|
185 | 0x000d 2 0 Non-CRC errors within host-to-device FIS |
---|
186 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC |
---|
187 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC |
---|
188 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC |
---|
189 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC |
---|