| 1 | smartctl 7.3 2022-02-28 r5338 [x86_64-w64-mingw32-w10-21H1] (sf-7.3-1)
|
|---|
| 2 | Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: WDC WD80EAZZ-00BKLB0
|
|---|
| 6 | Firmware Version: 80.00A80
|
|---|
| 7 | User Capacity: 8,001,563,222,016 bytes [8.00 TB]
|
|---|
| 8 | Sector Sizes: 512 bytes logical, 4096 bytes physical
|
|---|
| 9 | Rotation Rate: 5640 rpm
|
|---|
| 10 | Form Factor: 3.5 inches
|
|---|
| 11 | Device is: Not in smartctl database 7.3/5319
|
|---|
| 12 | ATA Version is: ACS-3 T13/2161-D revision 5
|
|---|
| 13 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
|
|---|
| 14 | Local Time is: Wed Mar 09 21:52:34 2022 EAST
|
|---|
| 15 | SMART support is: Available - device has SMART capability.
|
|---|
| 16 | SMART support is: Enabled
|
|---|
| 17 | AAM feature is: Unavailable
|
|---|
| 18 | APM feature is: Unavailable
|
|---|
| 19 | Rd look-ahead is: Enabled
|
|---|
| 20 | Write cache is: Enabled
|
|---|
| 21 | DSN feature is: Unavailable
|
|---|
| 22 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|---|
| 23 | Wt Cache Reorder: Enabled
|
|---|
| 24 |
|
|---|
| 25 | === START OF READ SMART DATA SECTION ===
|
|---|
| 26 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 27 |
|
|---|
| 28 | General SMART Values:
|
|---|
| 29 | Offline data collection status: (0x00) Offline data collection activity
|
|---|
| 30 | was never started.
|
|---|
| 31 | Auto Offline Data Collection: Disabled.
|
|---|
| 32 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 33 | without error or no self-test has ever
|
|---|
| 34 | been run.
|
|---|
| 35 | Total time to complete Offline
|
|---|
| 36 | data collection: (17744) seconds.
|
|---|
| 37 | Offline data collection
|
|---|
| 38 | capabilities: (0x11) SMART execute Offline immediate.
|
|---|
| 39 | No Auto Offline data collection support.
|
|---|
| 40 | Suspend Offline collection upon new
|
|---|
| 41 | command.
|
|---|
| 42 | No Offline surface scan supported.
|
|---|
| 43 | Self-test supported.
|
|---|
| 44 | No Conveyance Self-test supported.
|
|---|
| 45 | No Selective Self-test supported.
|
|---|
| 46 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 47 | power-saving mode.
|
|---|
| 48 | Supports SMART auto save timer.
|
|---|
| 49 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 50 | General Purpose Logging supported.
|
|---|
| 51 | Short self-test routine
|
|---|
| 52 | recommended polling time: ( 2) minutes.
|
|---|
| 53 | Extended self-test routine
|
|---|
| 54 | recommended polling time: ( 879) minutes.
|
|---|
| 55 | SCT capabilities: (0x3035) SCT Status supported.
|
|---|
| 56 | SCT Feature Control supported.
|
|---|
| 57 | SCT Data Table supported.
|
|---|
| 58 |
|
|---|
| 59 | SMART Attributes Data Structure revision number: 16
|
|---|
| 60 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 61 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 62 | 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
|
|---|
| 63 | 3 Spin_Up_Time POS--K 100 253 021 - 0
|
|---|
| 64 | 4 Start_Stop_Count -O--CK 100 100 000 - 1
|
|---|
| 65 | 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
|
|---|
| 66 | 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
|
|---|
| 67 | 9 Power_On_Hours -O--CK 100 100 000 - 74
|
|---|
| 68 | 10 Spin_Retry_Count -O--CK 100 253 000 - 0
|
|---|
| 69 | 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
|
|---|
| 70 | 12 Power_Cycle_Count -O--CK 100 100 000 - 1
|
|---|
| 71 | 192 Power-Off_Retract_Count -O--CK 200 200 000 - 0
|
|---|
| 72 | 193 Load_Cycle_Count -O--CK 200 200 000 - 6
|
|---|
| 73 | 194 Temperature_Celsius -O---K 109 103 000 - 43
|
|---|
| 74 | 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
|
|---|
| 75 | 197 Current_Pending_Sector -O--CK 200 200 000 - 0
|
|---|
| 76 | 198 Offline_Uncorrectable ----CK 100 253 000 - 0
|
|---|
| 77 | 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
|
|---|
| 78 | 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
|
|---|
| 79 | ||||||_ K auto-keep
|
|---|
| 80 | |||||__ C event count
|
|---|
| 81 | ||||___ R error rate
|
|---|
| 82 | |||____ S speed/performance
|
|---|
| 83 | ||_____ O updated online
|
|---|
| 84 | |______ P prefailure warning
|
|---|
| 85 |
|
|---|
| 86 | General Purpose Log Directory Version 1
|
|---|
| 87 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 88 | Address Access R/W Size Description
|
|---|
| 89 | 0x00 GPL,SL R/O 1 Log Directory
|
|---|
| 90 | 0x01 SL R/O 1 Summary SMART error log
|
|---|
| 91 | 0x02 SL R/O 5 Comprehensive SMART error log
|
|---|
| 92 | 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
|
|---|
| 93 | 0x06 SL R/O 1 SMART self-test log
|
|---|
| 94 | 0x07 GPL R/O 1 Extended self-test log
|
|---|
| 95 | 0x09 SL R/W 1 Selective self-test log
|
|---|
| 96 | 0x10 GPL R/O 1 NCQ Command Error log
|
|---|
| 97 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
|---|
| 98 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|---|
| 99 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|---|
| 100 | 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
|
|---|
| 101 | 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log
|
|---|
| 102 | 0xb7 GPL,SL VS 82 Device vendor specific log
|
|---|
| 103 | 0xbd GPL,SL VS 1 Device vendor specific log
|
|---|
| 104 | 0xc0 GPL,SL VS 1 Device vendor specific log
|
|---|
| 105 | 0xc1 GPL VS 93 Device vendor specific log
|
|---|
| 106 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
|---|
| 107 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|---|
| 108 |
|
|---|
| 109 | SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
|
|---|
| 110 | No Errors Logged
|
|---|
| 111 |
|
|---|
| 112 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
|---|
| 113 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 114 | # 1 Short offline Completed without error 00% 74 -
|
|---|
| 115 | # 2 Extended offline Completed without error 00% 45 -
|
|---|
| 116 |
|
|---|
| 117 | Selective Self-tests/Logging not supported
|
|---|
| 118 |
|
|---|
| 119 | SCT Status Version: 3
|
|---|
| 120 | SCT Version (vendor specific): 258 (0x0102)
|
|---|
| 121 | Device State: Active (0)
|
|---|
| 122 | Current Temperature: 43 Celsius
|
|---|
| 123 | Power Cycle Min/Max Temperature: 25/49 Celsius
|
|---|
| 124 | Lifetime Min/Max Temperature: 25/49 Celsius
|
|---|
| 125 | Under/Over Temperature Limit Count: 0/0
|
|---|
| 126 | Vendor specific:
|
|---|
| 127 | 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
|---|
| 128 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
|---|
| 129 |
|
|---|
| 130 | SCT Temperature History Version: 2
|
|---|
| 131 | Temperature Sampling Period: 1 minute
|
|---|
| 132 | Temperature Logging Interval: 1 minute
|
|---|
| 133 | Min/Max recommended Temperature: 0/60 Celsius
|
|---|
| 134 | Min/Max Temperature Limit: -41/85 Celsius
|
|---|
| 135 | Temperature History Size (Index): 478 (192)
|
|---|
| 136 |
|
|---|
| 137 | Index Estimated Time Temperature Celsius
|
|---|
| 138 | 193 2022-03-09 13:55 42 ***********************
|
|---|
| 139 | ... ..(344 skipped). .. ***********************
|
|---|
| 140 | 60 2022-03-09 19:40 42 ***********************
|
|---|
| 141 | 61 2022-03-09 19:41 43 ************************
|
|---|
| 142 | ... ..( 42 skipped). .. ************************
|
|---|
| 143 | 104 2022-03-09 20:24 43 ************************
|
|---|
| 144 | 105 2022-03-09 20:25 42 ***********************
|
|---|
| 145 | ... ..( 35 skipped). .. ***********************
|
|---|
| 146 | 141 2022-03-09 21:01 42 ***********************
|
|---|
| 147 | 142 2022-03-09 21:02 41 **********************
|
|---|
| 148 | ... ..( 10 skipped). .. **********************
|
|---|
| 149 | 153 2022-03-09 21:13 41 **********************
|
|---|
| 150 | 154 2022-03-09 21:14 42 ***********************
|
|---|
| 151 | ... ..( 33 skipped). .. ***********************
|
|---|
| 152 | 188 2022-03-09 21:48 42 ***********************
|
|---|
| 153 | 189 2022-03-09 21:49 43 ************************
|
|---|
| 154 | ... ..( 2 skipped). .. ************************
|
|---|
| 155 | 192 2022-03-09 21:52 43 ************************
|
|---|
| 156 |
|
|---|
| 157 | SCT Error Recovery Control command not supported
|
|---|
| 158 |
|
|---|
| 159 | Device Statistics (GP/SMART Log 0x04) not supported
|
|---|
| 160 |
|
|---|
| 161 | Pending Defects log (GP Log 0x0c) not supported
|
|---|
| 162 |
|
|---|
| 163 | SATA Phy Event Counters (GP Log 0x11)
|
|---|
| 164 | ID Size Value Description
|
|---|
| 165 | 0x0001 2 0 Command failed due to ICRC error
|
|---|
| 166 | 0x0002 2 0 R_ERR response for data FIS
|
|---|
| 167 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
|---|
| 168 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
|---|
| 169 | 0x0005 2 0 R_ERR response for non-data FIS
|
|---|
| 170 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|---|
| 171 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|---|
| 172 | 0x0008 2 0 Device-to-host non-data FIS retries
|
|---|
| 173 | 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
|
|---|
| 174 | 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
|
|---|
| 175 | 0x000b 2 0 CRC errors within host-to-device FIS
|
|---|
| 176 | 0x000d 2 0 Non-CRC errors within host-to-device FIS
|
|---|
| 177 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|---|
| 178 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
|---|
| 179 | 0x8000 4 269619 Vendor specific
|
|---|
| 180 |
|
|---|
